Add unarchived sqlite3 bundled dependency.

This is how node does it so let's stay consistent.

deps/sqlite3/INSTALL

+Installation Instructions
+*************************
+
+Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
+Software Foundation, Inc.
+
+This file is free documentation; the Free Software Foundation gives
+unlimited permission to copy, distribute and modify it.
+
+Basic Installation
+==================
+
+These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, and a
+file `config.log' containing compiler output (useful mainly for
+debugging `configure').
+
+   It can also use an optional file (typically called `config.cache'
+and enabled with `--cache-file=config.cache' or simply `-C') that saves
+the results of its tests to speed up reconfiguring.  (Caching is
+disabled by default to prevent problems with accidental use of stale
+cache files.)
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If you are using the cache, and at
+some point `config.cache' contains results you don't want to keep, you
+may remove or edit it.
+
+   The file `configure.ac' (or `configure.in') is used to create
+`configure' by a program called `autoconf'.  You only need
+`configure.ac' if you want to change it or regenerate `configure' using
+a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+Some systems require unusual options for compilation or linking that the
+`configure' script does not know about.  Run `./configure --help' for
+details on some of the pertinent environment variables.
+
+   You can give `configure' initial values for configuration parameters
+by setting variables in the command line or in the environment.  Here
+is an example:
+
+     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
+
+   *Note Defining Variables::, for more details.
+
+Compiling For Multiple Architectures
+====================================
+
+You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not support the `VPATH'
+variable, you have to compile the package for one architecture at a
+time in the source code directory.  After you have installed the
+package for one architecture, use `make distclean' before reconfiguring
+for another architecture.
+
+Installation Names
+==================
+
+By default, `make install' installs the package's commands under
+`/usr/local/bin', include files under `/usr/local/include', etc.  You
+can specify an installation prefix other than `/usr/local' by giving
+`configure' the option `--prefix=PREFIX'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+pass the option `--exec-prefix=PREFIX' to `configure', the package uses
+PREFIX as the prefix for installing programs and libraries.
+Documentation and other data files still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=DIR' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+There may be some features `configure' cannot figure out automatically,
+but needs to determine by the type of machine the package will run on.
+Usually, assuming the package is built to be run on the _same_
+architectures, `configure' can figure that out, but if it prints a
+message saying it cannot guess the machine type, give it the
+`--build=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name which has the form:
+
+     CPU-COMPANY-SYSTEM
+
+where SYSTEM can have one of these forms:
+
+     OS KERNEL-OS
+
+   See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the machine type.
+
+   If you are _building_ compiler tools for cross-compiling, you should
+use the option `--target=TYPE' to select the type of system they will
+produce code for.
+
+   If you want to _use_ a cross compiler, that generates code for a
+platform different from the build platform, you should specify the
+"host" platform (i.e., that on which the generated programs will
+eventually be run) with `--host=TYPE'.
+
+Sharing Defaults
+================
+
+If you want to set default values for `configure' scripts to share, you
+can create a site shell script called `config.site' that gives default
+values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Defining Variables
+==================
+
+Variables not defined in a site shell script can be set in the
+environment passed to `configure'.  However, some packages may run
+configure again during the build, and the customized values of these
+variables may be lost.  In order to avoid this problem, you should set
+them in the `configure' command line, using `VAR=value'.  For example:
+
+     ./configure CC=/usr/local2/bin/gcc
+
+causes the specified `gcc' to be used as the C compiler (unless it is
+overridden in the site shell script).  Here is a another example:
+
+     /bin/bash ./configure CONFIG_SHELL=/bin/bash
+
+Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
+configuration-related scripts to be executed by `/bin/bash'.
+
+`configure' Invocation
+======================
+
+`configure' recognizes the following options to control how it operates.
+
+`--help'
+`-h'
+     Print a summary of the options to `configure', and exit.
+
+`--version'
+`-V'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`--cache-file=FILE'
+     Enable the cache: use and save the results of the tests in FILE,
+     traditionally `config.cache'.  FILE defaults to `/dev/null' to
+     disable caching.
+
+`--config-cache'
+`-C'
+     Alias for `--cache-file=config.cache'.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`configure' also accepts some other, not widely useful, options.  Run
+`configure --help' for more details.
+

deps/sqlite3/Makefile.am

+
+AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
+
+lib_LTLIBRARIES = libsqlite3.la
+libsqlite3_la_SOURCES = sqlite3.c
+libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
+
+bin_PROGRAMS = sqlite3
+sqlite3_SOURCES = shell.c sqlite3.h
+sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@
+sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la
+
+include_HEADERS = sqlite3.h sqlite3ext.h
+
+EXTRA_DIST = sqlite3.pc sqlite3.1 tea
+pkgconfigdir = ${libdir}/pkgconfig
+pkgconfig_DATA = sqlite3.pc
+
+man_MANS = sqlite3.1

deps/sqlite3/Makefile.in

+# Makefile.in generated by automake 1.11.1 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
+# Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+
+
+
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+bin_PROGRAMS = sqlite3$(EXEEXT)
+subdir = .
+DIST_COMMON = README $(am__configure_deps) $(include_HEADERS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(srcdir)/sqlite3.pc.in $(top_srcdir)/configure INSTALL \
+	config.guess config.sub depcomp install-sh ltmain.sh missing
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
+ configure.lineno config.status.lineno
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES = sqlite3.pc
+CONFIG_CLEAN_VPATH_FILES =
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
+	"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" \
+	"$(DESTDIR)$(includedir)"
+LTLIBRARIES = $(lib_LTLIBRARIES)
+libsqlite3_la_LIBADD =
+am_libsqlite3_la_OBJECTS = sqlite3.lo
+libsqlite3_la_OBJECTS = $(am_libsqlite3_la_OBJECTS)
+libsqlite3_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
+	$(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
+	$(libsqlite3_la_LDFLAGS) $(LDFLAGS) -o $@
+PROGRAMS = $(bin_PROGRAMS)
+am_sqlite3_OBJECTS = shell.$(OBJEXT)
+sqlite3_OBJECTS = $(am_sqlite3_OBJECTS)
+DEFAULT_INCLUDES = -I.@am__isrc@
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
+	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
+	$(LDFLAGS) -o $@
+SOURCES = $(libsqlite3_la_SOURCES) $(sqlite3_SOURCES)
+DIST_SOURCES = $(libsqlite3_la_SOURCES) $(sqlite3_SOURCES)
+man1dir = $(mandir)/man1
+NROFF = nroff
+MANS = $(man_MANS)
+DATA = $(pkgconfig_DATA)
+HEADERS = $(include_HEADERS)
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+am__remove_distdir = \
+  { test ! -d "$(distdir)" \
+    || { find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
+         && rm -fr "$(distdir)"; }; }
+DIST_ARCHIVES = $(distdir).tar.gz
+GZIP_ENV = --best
+distuninstallcheck_listfiles = find . -type f -print
+distcleancheck_listfiles = find . -type f -print
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_CFLAGS = @BUILD_CFLAGS@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+DYNAMIC_EXTENSION_FLAGS = @DYNAMIC_EXTENSION_FLAGS@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+RANLIB = @RANLIB@
+READLINE_LIBS = @READLINE_LIBS@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+THREADSAFE_FLAGS = @THREADSAFE_FLAGS@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+lt_ECHO = @lt_ECHO@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+AM_CFLAGS = @THREADSAFE_FLAGS@ @DYNAMIC_EXTENSION_FLAGS@ -DSQLITE_ENABLE_FTS3 -DSQLITE_ENABLE_RTREE
+lib_LTLIBRARIES = libsqlite3.la
+libsqlite3_la_SOURCES = sqlite3.c
+libsqlite3_la_LDFLAGS = -no-undefined -version-info 8:6:8
+sqlite3_SOURCES = shell.c sqlite3.h
+sqlite3_LDADD = $(top_builddir)/libsqlite3.la @READLINE_LIBS@
+sqlite3_DEPENDENCIES = $(top_builddir)/libsqlite3.la
+include_HEADERS = sqlite3.h sqlite3ext.h
+EXTRA_DIST = sqlite3.pc sqlite3.1 tea
+pkgconfigdir = ${libdir}/pkgconfig
+pkgconfig_DATA = sqlite3.pc
+man_MANS = sqlite3.1
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .c .lo .o .obj
+am--refresh:
+	@:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
+	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    echo ' $(SHELL) ./config.status'; \
+	    $(SHELL) ./config.status;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	$(SHELL) ./config.status --recheck
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	$(am__cd) $(srcdir) && $(AUTOCONF)
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+$(am__aclocal_m4_deps):
+sqlite3.pc: $(top_builddir)/config.status $(srcdir)/sqlite3.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
+install-libLTLIBRARIES: $(lib_LTLIBRARIES)
+	@$(NORMAL_INSTALL)
+	test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	list2=; for p in $$list; do \
+	  if test -f $$p; then \
+	    list2="$$list2 $$p"; \
+	  else :; fi; \
+	done; \
+	test -z "$$list2" || { \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(libdir)'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(libdir)"; \
+	}
+
+uninstall-libLTLIBRARIES:
+	@$(NORMAL_UNINSTALL)
+	@list='$(lib_LTLIBRARIES)'; test -n "$(libdir)" || list=; \
+	for p in $$list; do \
+	  $(am__strip_dir) \
+	  echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$f'"; \
+	  $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$f"; \
+	done
+
+clean-libLTLIBRARIES:
+	-test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES)
+	@list='$(lib_LTLIBRARIES)'; for p in $$list; do \
+	  dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
+	  test "$$dir" != "$$p" || dir=.; \
+	  echo "rm -f \"$${dir}/so_locations\""; \
+	  rm -f "$${dir}/so_locations"; \
+	done
+libsqlite3.la: $(libsqlite3_la_OBJECTS) $(libsqlite3_la_DEPENDENCIES) 
+	$(libsqlite3_la_LINK) -rpath $(libdir) $(libsqlite3_la_OBJECTS) $(libsqlite3_la_LIBADD) $(LIBS)
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p || test -f $$p1; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
+	echo " rm -f" $$list; \
+	rm -f $$list || exit $$?; \
+	test -n "$(EXEEXT)" || exit 0; \
+	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
+	echo " rm -f" $$list; \
+	rm -f $$list
+sqlite3$(EXEEXT): $(sqlite3_OBJECTS) $(sqlite3_DEPENDENCIES) 
+	@rm -f sqlite3$(EXEEXT)
+	$(LINK) $(sqlite3_OBJECTS) $(sqlite3_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/shell.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sqlite3.Plo@am__quote@
+
+.c.o:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c $<
+
+.c.obj:
+@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`
+
+.c.lo:
+@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool config.lt
+install-man1: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man1:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man1dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.1[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	test -z "$$files" || { \
+	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
+	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }
+install-pkgconfigDATA: $(pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	test -z "$(pkgconfigdir)" || $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)"
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(pkgconfigdir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(pkgconfigdir)" && rm -f $$files
+install-includeHEADERS: $(include_HEADERS)
+	@$(NORMAL_INSTALL)
+	test -z "$(includedir)" || $(MKDIR_P) "$(DESTDIR)$(includedir)"
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_HEADER) $$files '$(DESTDIR)$(includedir)'"; \
+	  $(INSTALL_HEADER) $$files "$(DESTDIR)$(includedir)" || exit $$?; \
+	done
+
+uninstall-includeHEADERS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	test -n "$$files" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(includedir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(includedir)" && rm -f $$files
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically \`make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
+	$(am__remove_distdir)
+	test -d "$(distdir)" || mkdir "$(distdir)"
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	-test -n "$(am__skip_mode_fix)" \
+	|| find "$(distdir)" -type d ! -perm -755 \
+		-exec chmod u+rwx,go+rx {} \; -o \
+	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
+	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
+	|| chmod -R a+r "$(distdir)"
+dist-gzip: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+dist-bzip2: distdir
+	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
+	$(am__remove_distdir)
+
+dist-lzma: distdir
+	tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
+	$(am__remove_distdir)
+
+dist-xz: distdir
+	tardir=$(distdir) && $(am__tar) | xz -c >$(distdir).tar.xz
+	$(am__remove_distdir)
+
+dist-tarZ: distdir
+	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
+	$(am__remove_distdir)
+
+dist-shar: distdir
+	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
+	$(am__remove_distdir)
+
+dist-zip: distdir
+	-rm -f $(distdir).zip
+	zip -rq $(distdir).zip $(distdir)
+	$(am__remove_distdir)
+
+dist dist-all: distdir
+	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+	$(am__remove_distdir)
+
+# This target untars the dist file and tries a VPATH configuration.  Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+	case '$(DIST_ARCHIVES)' in \
+	*.tar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
+	*.tar.bz2*) \
+	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
+	*.tar.lzma*) \
+	  lzma -dc $(distdir).tar.lzma | $(am__untar) ;;\
+	*.tar.xz*) \
+	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
+	*.tar.Z*) \
+	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
+	*.shar.gz*) \
+	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
+	*.zip*) \
+	  unzip $(distdir).zip ;;\
+	esac
+	chmod -R a-w $(distdir); chmod a+w $(distdir)
+	mkdir $(distdir)/_build
+	mkdir $(distdir)/_inst
+	chmod a-w $(distdir)
+	test -d $(distdir)/_build || exit 0; \
+	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
+	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
+	  && am__cwd=`pwd` \
+	  && $(am__cd) $(distdir)/_build \
+	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
+	    $(DISTCHECK_CONFIGURE_FLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) \
+	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
+	  && $(MAKE) $(AM_MAKEFLAGS) check \
+	  && $(MAKE) $(AM_MAKEFLAGS) install \
+	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
+	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
+	        distuninstallcheck \
+	  && chmod -R a-w "$$dc_install_base" \
+	  && ({ \
+	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
+	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
+	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
+	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
+	  && rm -rf "$$dc_destdir" \
+	  && $(MAKE) $(AM_MAKEFLAGS) dist \
+	  && rm -rf $(DIST_ARCHIVES) \
+	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
+	  && cd "$$am__cwd" \
+	  || exit 1
+	$(am__remove_distdir)
+	@(echo "$(distdir) archives ready for distribution: "; \
+	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
+	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
+distuninstallcheck:
+	@$(am__cd) '$(distuninstallcheck_dir)' \
+	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
+	   || { echo "ERROR: files left after uninstall:" ; \
+	        if test -n "$(DESTDIR)"; then \
+	          echo "  (check DESTDIR support)"; \
+	        fi ; \
+	        $(distuninstallcheck_listfiles) ; \
+	        exit 1; } >&2
+distcleancheck: distclean
+	@if test '$(srcdir)' = . ; then \
+	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
+	  exit 1 ; \
+	fi
+	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
+	  || { echo "ERROR: files left in build directory after distclean:" ; \
+	       $(distcleancheck_listfiles) ; \
+	       exit 1; } >&2
+check-am: all-am
+check: check-am
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(DATA) $(HEADERS)
+install-binPROGRAMS: install-libLTLIBRARIES
+
+installdirs:
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-libtool distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-includeHEADERS install-man \
+	install-pkgconfigDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-libLTLIBRARIES
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man1
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
+	-rm -rf $(top_srcdir)/autom4te.cache
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic \
+	mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-man uninstall-pkgconfigDATA
+
+uninstall-man: uninstall-man1
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am am--refresh check check-am clean \
+	clean-binPROGRAMS clean-generic clean-libLTLIBRARIES \
+	clean-libtool ctags dist dist-all dist-bzip2 dist-gzip \
+	dist-lzma dist-shar dist-tarZ dist-xz dist-zip distcheck \
+	distclean distclean-compile distclean-generic \
+	distclean-libtool distclean-tags distcleancheck distdir \
+	distuninstallcheck dvi dvi-am html html-am info info-am \
+	install install-am install-binPROGRAMS install-data \
+	install-data-am install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am \
+	install-includeHEADERS install-info install-info-am \
+	install-libLTLIBRARIES install-man install-man1 install-pdf \
+	install-pdf-am install-pkgconfigDATA install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
+	pdf pdf-am ps ps-am tags uninstall uninstall-am \
+	uninstall-binPROGRAMS uninstall-includeHEADERS \
+	uninstall-libLTLIBRARIES uninstall-man uninstall-man1 \
+	uninstall-pkgconfigDATA
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

deps/sqlite3/README

+
+This package contains:
+
+ * the SQLite library amalgamation (single file) source code distribution,
+ * the shell.c file used to build the sqlite3 shell too, and
+ * the sqlite3.h and sqlite3ext.h header files required to link programs
+   and sqlite extensions against the installed libary.
+ * autoconf/automake installation infrastucture.
+
+The generic installation instructions for autoconf/automake are found
+in the INSTALL file.
+
+The following SQLite specific boolean options are supported:
+
+  --enable-readline           use readline in shell tool   [default=yes]
+  --enable-threadsafe         build a thread-safe library  [default=yes]
+  --enable-dynamic-extensions support loadable extensions  [default=yes]
+
+The default value for the CFLAGS variable (options passed to the C 
+compiler) includes debugging symbols in the build, resulting in larger
+binaries than are necessary. Override it on the configure command
+line like this:
+
+  $ CFLAGS="-Os" ./configure
+
+to produce a smaller installation footprint.
+
+Other SQLite compilation parameters can also be set using CFLAGS. For
+example:
+
+  $ CFLAGS="-Os -DSQLITE_OMIT_TRIGGERS" ./configure
+

deps/sqlite3/config.guess

+#! /bin/sh
+# Attempt to guess a canonical system name.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-07-08'
+
+# This file is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Originally written by Per Bothner <per@bothner.com>.
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# This script attempts to guess a canonical system name similar to
+# config.sub.  If it succeeds, it prints the system name on stdout, and
+# exits with 0.  Otherwise, it exits with 1.
+#
+# The plan is that this can be called by configure scripts if you
+# don't specify an explicit build system type.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION]
+
+Output the configuration name of the system \`$me' is run on.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.guess ($timestamp)
+
+Originally written by Per Bothner.
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help" >&2
+       exit 1 ;;
+    * )
+       break ;;
+  esac
+done
+
+if test $# != 0; then
+  echo "$me: too many arguments$help" >&2
+  exit 1
+fi
+
+trap 'exit 1' 1 2 15
+
+# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
+# compiler to aid in system detection is discouraged as it requires
+# temporary files to be created and, as you can see below, it is a
+# headache to deal with in a portable fashion.
+
+# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still
+# use `HOST_CC' if defined, but it is deprecated.
+
+# Portable tmp directory creation inspired by the Autoconf team.
+
+set_cc_for_build='
+trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ;
+trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ;
+: ${TMPDIR=/tmp} ;
+ { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
+ { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } ||
+ { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } ||
+ { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ;
+dummy=$tmp/dummy ;
+tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ;
+case $CC_FOR_BUILD,$HOST_CC,$CC in
+ ,,)    echo "int x;" > $dummy.c ;
+	for c in cc gcc c89 c99 ; do
+	  if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then
+	     CC_FOR_BUILD="$c"; break ;
+	  fi ;
+	done ;
+	if test x"$CC_FOR_BUILD" = x ; then
+	  CC_FOR_BUILD=no_compiler_found ;
+	fi
+	;;
+ ,,*)   CC_FOR_BUILD=$CC ;;
+ ,*,*)  CC_FOR_BUILD=$HOST_CC ;;
+esac ; set_cc_for_build= ;'
+
+# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
+# (ghazi@noc.rutgers.edu 1994-08-24)
+if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
+	PATH=$PATH:/.attbin ; export PATH
+fi
+
+UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
+UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
+UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
+UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
+
+# Note: order is significant - the case branches are not exclusive.
+
+case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
+    *:NetBSD:*:*)
+	# NetBSD (nbsd) targets should (where applicable) match one or
+	# more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*,
+	# *-*-netbsdecoff* and *-*-netbsd*.  For targets that recently
+	# switched to ELF, *-*-netbsd* would select the old
+	# object file format.  This provides both forward
+	# compatibility and a consistent mechanism for selecting the
+	# object file format.
+	#
+	# Note: NetBSD doesn't particularly care about the vendor
+	# portion of the name.  We always set it to "unknown".
+	sysctl="sysctl -n hw.machine_arch"
+	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	case "${UNAME_MACHINE_ARCH}" in
+	    armeb) machine=armeb-unknown ;;
+	    arm*) machine=arm-unknown ;;
+	    sh3el) machine=shl-unknown ;;
+	    sh3eb) machine=sh-unknown ;;
+	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
+	esac
+	# The Operating System including object format, if it has switched
+	# to ELF recently, or will in the future.
+	case "${UNAME_MACHINE_ARCH}" in
+	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
+		eval $set_cc_for_build
+		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
+			| grep __ELF__ >/dev/null
+		then
+		    # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
+		    # Return netbsd for either.  FIX?
+		    os=netbsd
+		else
+		    os=netbsdelf
+		fi
+		;;
+	    *)
+	        os=netbsd
+		;;
+	esac
+	# The OS release
+	# Debian GNU/NetBSD machines have a different userland, and
+	# thus, need a distinct triplet. However, they do not need
+	# kernel version information, so it can be replaced with a
+	# suitable tag, in the style of linux-gnu.
+	case "${UNAME_VERSION}" in
+	    Debian*)
+		release='-gnu'
+		;;
+	    *)
+		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		;;
+	esac
+	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
+	# contains redundant information, the shorter form:
+	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
+	echo "${machine}-${os}${release}"
+	exit ;;
+    *:OpenBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
+	exit ;;
+    *:ekkoBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
+	exit ;;
+    macppc:MirBSD:*:*)
+	echo powerppc-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    *:MirBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
+	exit ;;
+    alpha:OSF1:*:*)
+	case $UNAME_RELEASE in
+	*4.0)
+		UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
+		;;
+	*5.*)
+	        UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
+		;;
+	esac
+	# According to Compaq, /usr/sbin/psrinfo has been available on
+	# OSF/1 and Tru64 systems produced since 1995.  I hope that
+	# covers most systems running today.  This code pipes the CPU
+	# types through head -n 1, so we only detect the type of CPU 0.
+	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
+	case "$ALPHA_CPU_TYPE" in
+	    "EV4 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV4.5 (21064)")
+		UNAME_MACHINE="alpha" ;;
+	    "LCA4 (21066/21068)")
+		UNAME_MACHINE="alpha" ;;
+	    "EV5 (21164)")
+		UNAME_MACHINE="alphaev5" ;;
+	    "EV5.6 (21164A)")
+		UNAME_MACHINE="alphaev56" ;;
+	    "EV5.6 (21164PC)")
+		UNAME_MACHINE="alphapca56" ;;
+	    "EV5.7 (21164PC)")
+		UNAME_MACHINE="alphapca57" ;;
+	    "EV6 (21264)")
+		UNAME_MACHINE="alphaev6" ;;
+	    "EV6.7 (21264A)")
+		UNAME_MACHINE="alphaev67" ;;
+	    "EV6.8CB (21264C)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8AL (21264B)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.8CX (21264D)")
+		UNAME_MACHINE="alphaev68" ;;
+	    "EV6.9A (21264/EV69A)")
+		UNAME_MACHINE="alphaev69" ;;
+	    "EV7 (21364)")
+		UNAME_MACHINE="alphaev7" ;;
+	    "EV7.9 (21364A)")
+		UNAME_MACHINE="alphaev79" ;;
+	esac
+	# A Pn.n version is a patched version.
+	# A Vn.n version is a released version.
+	# A Tn.n version is a released field test version.
+	# A Xn.n version is an unreleased experimental baselevel.
+	# 1.2 uses "1.2" for uname -r.
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	exit ;;
+    Alpha\ *:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# Should we change UNAME_MACHINE based on the output of uname instead
+	# of the specific Alpha model?
+	echo alpha-pc-interix
+	exit ;;
+    21064:Windows_NT:50:3)
+	echo alpha-dec-winnt3.5
+	exit ;;
+    Amiga*:UNIX_System_V:4.0:*)
+	echo m68k-unknown-sysv4
+	exit ;;
+    *:[Aa]miga[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-amigaos
+	exit ;;
+    *:[Mm]orph[Oo][Ss]:*:*)
+	echo ${UNAME_MACHINE}-unknown-morphos
+	exit ;;
+    *:OS/390:*:*)
+	echo i370-ibm-openedition
+	exit ;;
+    *:z/VM:*:*)
+	echo s390-ibm-zvmoe
+	exit ;;
+    *:OS400:*:*)
+        echo powerpc-ibm-os400
+	exit ;;
+    arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
+	echo arm-acorn-riscix${UNAME_RELEASE}
+	exit ;;
+    arm:riscos:*:*|arm:RISCOS:*:*)
+	echo arm-unknown-riscos
+	exit ;;
+    SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
+	echo hppa1.1-hitachi-hiuxmpp
+	exit ;;
+    Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
+	# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
+	if test "`(/bin/universe) 2>/dev/null`" = att ; then
+		echo pyramid-pyramid-sysv3
+	else
+		echo pyramid-pyramid-bsd
+	fi
+	exit ;;
+    NILE*:*:*:dcosx)
+	echo pyramid-pyramid-svr4
+	exit ;;
+    DRS?6000:unix:4.0:6*)
+	echo sparc-icl-nx6
+	exit ;;
+    DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
+	case `/usr/bin/uname -p` in
+	    sparc) echo sparc-icl-nx7; exit ;;
+	esac ;;
+    sun4H:SunOS:5.*:*)
+	echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
+	echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    i86pc:SunOS:5.*:*)
+	echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:6*:*)
+	# According to config.sub, this is the proper way to canonicalize
+	# SunOS6.  Hard to guess exactly what SunOS6 will be like, but
+	# it's likely to be more like Solaris than SunOS4.
+	echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    sun4*:SunOS:*:*)
+	case "`/usr/bin/arch -k`" in
+	    Series*|S4*)
+		UNAME_RELEASE=`uname -v`
+		;;
+	esac
+	# Japanese Language versions have a version number like `4.1.3-JL'.
+	echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'`
+	exit ;;
+    sun3*:SunOS:*:*)
+	echo m68k-sun-sunos${UNAME_RELEASE}
+	exit ;;
+    sun*:*:4.2BSD:*)
+	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
+	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	case "`/bin/arch`" in
+	    sun3)
+		echo m68k-sun-sunos${UNAME_RELEASE}
+		;;
+	    sun4)
+		echo sparc-sun-sunos${UNAME_RELEASE}
+		;;
+	esac
+	exit ;;
+    aushp:SunOS:*:*)
+	echo sparc-auspex-sunos${UNAME_RELEASE}
+	exit ;;
+    # The situation for MiNT is a little confusing.  The machine name
+    # can be virtually everything (everything which is not
+    # "atarist" or "atariste" at least should have a processor
+    # > m68000).  The system name ranges from "MiNT" over "FreeMiNT"
+    # to the lowercase version "mint" (or "freemint").  Finally
+    # the system name "TOS" denotes a system which is actually not
+    # MiNT.  But MiNT is downward compatible to TOS, so this should
+    # be no problem.
+    atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
+	echo m68k-atari-mint${UNAME_RELEASE}
+        exit ;;
+    *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
+        echo m68k-atari-mint${UNAME_RELEASE}
+	exit ;;
+    milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
+        echo m68k-milan-mint${UNAME_RELEASE}
+        exit ;;
+    hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
+        echo m68k-hades-mint${UNAME_RELEASE}
+        exit ;;
+    *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
+        echo m68k-unknown-mint${UNAME_RELEASE}
+        exit ;;
+    m68k:machten:*:*)
+	echo m68k-apple-machten${UNAME_RELEASE}
+	exit ;;
+    powerpc:machten:*:*)
+	echo powerpc-apple-machten${UNAME_RELEASE}
+	exit ;;
+    RISC*:Mach:*:*)
+	echo mips-dec-mach_bsd4.3
+	exit ;;
+    RISC*:ULTRIX:*:*)
+	echo mips-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    VAX*:ULTRIX*:*:*)
+	echo vax-dec-ultrix${UNAME_RELEASE}
+	exit ;;
+    2020:CLIX:*:* | 2430:CLIX:*:*)
+	echo clipper-intergraph-clix${UNAME_RELEASE}
+	exit ;;
+    mips:*:*:UMIPS | mips:*:*:RISCos)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+#ifdef __cplusplus
+#include <stdio.h>  /* for printf() prototype */
+	int main (int argc, char *argv[]) {
+#else
+	int main (argc, argv) int argc; char *argv[]; {
+#endif
+	#if defined (host_mips) && defined (MIPSEB)
+	#if defined (SYSTYPE_SYSV)
+	  printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_SVR4)
+	  printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0);
+	#endif
+	#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
+	  printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0);
+	#endif
+	#endif
+	  exit (-1);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c &&
+	  dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` &&
+	  SYSTEM_NAME=`$dummy $dummyarg` &&
+	    { echo "$SYSTEM_NAME"; exit; }
+	echo mips-mips-riscos${UNAME_RELEASE}
+	exit ;;
+    Motorola:PowerMAX_OS:*:*)
+	echo powerpc-motorola-powermax
+	exit ;;
+    Motorola:*:4.3:PL8-*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
+	echo powerpc-harris-powermax
+	exit ;;
+    Night_Hawk:Power_UNIX:*:*)
+	echo powerpc-harris-powerunix
+	exit ;;
+    m88k:CX/UX:7*:*)
+	echo m88k-harris-cxux7
+	exit ;;
+    m88k:*:4*:R4*)
+	echo m88k-motorola-sysv4
+	exit ;;
+    m88k:*:3*:R3*)
+	echo m88k-motorola-sysv3
+	exit ;;
+    AViiON:dgux:*:*)
+        # DG/UX returns AViiON for all architectures
+        UNAME_PROCESSOR=`/usr/bin/uname -p`
+	if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ]
+	then
+	    if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \
+	       [ ${TARGET_BINARY_INTERFACE}x = x ]
+	    then
+		echo m88k-dg-dgux${UNAME_RELEASE}
+	    else
+		echo m88k-dg-dguxbcs${UNAME_RELEASE}
+	    fi
+	else
+	    echo i586-dg-dgux${UNAME_RELEASE}
+	fi
+ 	exit ;;
+    M88*:DolphinOS:*:*)	# DolphinOS (SVR3)
+	echo m88k-dolphin-sysv3
+	exit ;;
+    M88*:*:R3*:*)
+	# Delta 88k system running SVR3
+	echo m88k-motorola-sysv3
+	exit ;;
+    XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
+	echo m88k-tektronix-sysv3
+	exit ;;
+    Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
+	echo m68k-tektronix-bsd
+	exit ;;
+    *:IRIX*:*:*)
+	echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'`
+	exit ;;
+    ????????:AIX?:[12].1:2)   # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
+	echo romp-ibm-aix     # uname -m gives an 8 hex-code CPU id
+	exit ;;               # Note that: echo "'`uname -s`'" gives 'AIX '
+    i*86:AIX:*:*)
+	echo i386-ibm-aix
+	exit ;;
+    ia64:AIX:*:*)
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${UNAME_MACHINE}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:2:3)
+	if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
+		eval $set_cc_for_build
+		sed 's/^		//' << EOF >$dummy.c
+		#include <sys/systemcfg.h>
+
+		main()
+			{
+			if (!__power_pc())
+				exit(1);
+			puts("powerpc-ibm-aix3.2.5");
+			exit(0);
+			}
+EOF
+		if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy`
+		then
+			echo "$SYSTEM_NAME"
+		else
+			echo rs6000-ibm-aix3.2.5
+		fi
+	elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
+		echo rs6000-ibm-aix3.2.4
+	else
+		echo rs6000-ibm-aix3.2
+	fi
+	exit ;;
+    *:AIX:*:[45])
+	IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
+	if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then
+		IBM_ARCH=rs6000
+	else
+		IBM_ARCH=powerpc
+	fi
+	if [ -x /usr/bin/oslevel ] ; then
+		IBM_REV=`/usr/bin/oslevel`
+	else
+		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
+	fi
+	echo ${IBM_ARCH}-ibm-aix${IBM_REV}
+	exit ;;
+    *:AIX:*:*)
+	echo rs6000-ibm-aix
+	exit ;;
+    ibmrt:4.4BSD:*|romp-ibm:BSD:*)
+	echo romp-ibm-bsd4.4
+	exit ;;
+    ibmrt:*BSD:*|romp-ibm:BSD:*)            # covers RT/PC BSD and
+	echo romp-ibm-bsd${UNAME_RELEASE}   # 4.3 with uname added to
+	exit ;;                             # report: romp-ibm BSD 4.3
+    *:BOSX:*:*)
+	echo rs6000-bull-bosx
+	exit ;;
+    DPX/2?00:B.O.S.:*:*)
+	echo m68k-bull-sysv3
+	exit ;;
+    9000/[34]??:4.3bsd:1.*:*)
+	echo m68k-hp-bsd
+	exit ;;
+    hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
+	echo m68k-hp-bsd4.4
+	exit ;;
+    9000/[34678]??:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	case "${UNAME_MACHINE}" in
+	    9000/31? )            HP_ARCH=m68000 ;;
+	    9000/[34]?? )         HP_ARCH=m68k ;;
+	    9000/[678][0-9][0-9])
+		if [ -x /usr/bin/getconf ]; then
+		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
+                    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
+                    case "${sc_cpu_version}" in
+                      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+                      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+                      532)                      # CPU_PA_RISC2_0
+                        case "${sc_kernel_bits}" in
+                          32) HP_ARCH="hppa2.0n" ;;
+                          64) HP_ARCH="hppa2.0w" ;;
+			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+                        esac ;;
+                    esac
+		fi
+		if [ "${HP_ARCH}" = "" ]; then
+		    eval $set_cc_for_build
+		    sed 's/^              //' << EOF >$dummy.c
+
+              #define _HPUX_SOURCE
+              #include <stdlib.h>
+              #include <unistd.h>
+
+              int main ()
+              {
+              #if defined(_SC_KERNEL_BITS)
+                  long bits = sysconf(_SC_KERNEL_BITS);
+              #endif
+                  long cpu  = sysconf (_SC_CPU_VERSION);
+
+                  switch (cpu)
+              	{
+              	case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
+              	case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
+              	case CPU_PA_RISC2_0:
+              #if defined(_SC_KERNEL_BITS)
+              	    switch (bits)
+              		{
+              		case 64: puts ("hppa2.0w"); break;
+              		case 32: puts ("hppa2.0n"); break;
+              		default: puts ("hppa2.0"); break;
+              		} break;
+              #else  /* !defined(_SC_KERNEL_BITS) */
+              	    puts ("hppa2.0"); break;
+              #endif
+              	default: puts ("hppa1.0"); break;
+              	}
+                  exit (0);
+              }
+EOF
+		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    test -z "$HP_ARCH" && HP_ARCH=hppa
+		fi ;;
+	esac
+	if [ ${HP_ARCH} = "hppa2.0w" ]
+	then
+	    eval $set_cc_for_build
+
+	    # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
+	    # 32-bit code.  hppa64-hp-hpux* has the same kernel and a compiler
+	    # generating 64-bit code.  GNU and HP use different nomenclature:
+	    #
+	    # $ CC_FOR_BUILD=cc ./config.guess
+	    # => hppa2.0w-hp-hpux11.23
+	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
+	    # => hppa64-hp-hpux11.23
+
+	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+		grep __LP64__ >/dev/null
+	    then
+		HP_ARCH="hppa2.0w"
+	    else
+		HP_ARCH="hppa64"
+	    fi
+	fi
+	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
+	exit ;;
+    ia64:HP-UX:*:*)
+	HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
+	echo ia64-hp-hpux${HPUX_REV}
+	exit ;;
+    3050*:HI-UX:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <unistd.h>
+	int
+	main ()
+	{
+	  long cpu = sysconf (_SC_CPU_VERSION);
+	  /* The order matters, because CPU_IS_HP_MC68K erroneously returns
+	     true for CPU_PA_RISC1_0.  CPU_IS_PA_RISC returns correct
+	     results, however.  */
+	  if (CPU_IS_PA_RISC (cpu))
+	    {
+	      switch (cpu)
+		{
+		  case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
+		  case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
+		  default: puts ("hppa-hitachi-hiuxwe2"); break;
+		}
+	    }
+	  else if (CPU_IS_HP_MC68K (cpu))
+	    puts ("m68k-hitachi-hiuxwe2");
+	  else puts ("unknown-hitachi-hiuxwe2");
+	  exit (0);
+	}
+EOF
+	$CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` &&
+		{ echo "$SYSTEM_NAME"; exit; }
+	echo unknown-hitachi-hiuxwe2
+	exit ;;
+    9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* )
+	echo hppa1.1-hp-bsd
+	exit ;;
+    9000/8??:4.3bsd:*:*)
+	echo hppa1.0-hp-bsd
+	exit ;;
+    *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
+	echo hppa1.0-hp-mpeix
+	exit ;;
+    hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
+	echo hppa1.1-hp-osf
+	exit ;;
+    hp8??:OSF1:*:*)
+	echo hppa1.0-hp-osf
+	exit ;;
+    i*86:OSF1:*:*)
+	if [ -x /usr/sbin/sysversion ] ; then
+	    echo ${UNAME_MACHINE}-unknown-osf1mk
+	else
+	    echo ${UNAME_MACHINE}-unknown-osf1
+	fi
+	exit ;;
+    parisc*:Lites*:*:*)
+	echo hppa1.1-hp-lites
+	exit ;;
+    C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
+	echo c1-convex-bsd
+        exit ;;
+    C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+        exit ;;
+    C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
+	echo c34-convex-bsd
+        exit ;;
+    C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
+	echo c38-convex-bsd
+        exit ;;
+    C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
+	echo c4-convex-bsd
+        exit ;;
+    CRAY*Y-MP:*:*:*)
+	echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*[A-Z]90:*:*:*)
+	echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \
+	| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
+	      -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
+	      -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*TS:*:*:*)
+	echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*T3E:*:*:*)
+	echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    CRAY*SV1:*:*:*)
+	echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    *:UNICOS/mp:*:*)
+	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
+	exit ;;
+    F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
+	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
+        echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+        exit ;;
+    5000:UNIX_System_V:4.*:*)
+        FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+        FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+        echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
+	exit ;;
+    i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
+	echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE}
+	exit ;;
+    sparc*:BSD/OS:*:*)
+	echo sparc-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:BSD/OS:*:*)
+	echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE}
+	exit ;;
+    *:FreeBSD:*:*)
+	echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    i*:CYGWIN*:*)
+	echo ${UNAME_MACHINE}-pc-cygwin
+	exit ;;
+    i*:MINGW*:*)
+	echo ${UNAME_MACHINE}-pc-mingw32
+	exit ;;
+    i*:windows32*:*)
+    	# uname -m includes "-pc" on this system.
+    	echo ${UNAME_MACHINE}-mingw32
+	exit ;;
+    i*:PW*:*)
+	echo ${UNAME_MACHINE}-pc-pw32
+	exit ;;
+    x86:Interix*:[34]*)
+	echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//'
+	exit ;;
+    [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*)
+	echo i${UNAME_MACHINE}-pc-mks
+	exit ;;
+    i*:Windows_NT*:* | Pentium*:Windows_NT*:*)
+	# How do we know it's Interix rather than the generic POSIX subsystem?
+	# It also conflicts with pre-2.0 versions of AT&T UWIN. Should we
+	# UNAME_MACHINE based on the output of uname instead of i386?
+	echo i586-pc-interix
+	exit ;;
+    i*:UWIN*:*)
+	echo ${UNAME_MACHINE}-pc-uwin
+	exit ;;
+    amd64:CYGWIN*:*:*)
+	echo x86_64-unknown-cygwin
+	exit ;;
+    p*:CYGWIN*:*)
+	echo powerpcle-unknown-cygwin
+	exit ;;
+    prep*:SunOS:5.*:*)
+	echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
+	exit ;;
+    *:GNU:*:*)
+	# the GNU system
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	exit ;;
+    *:GNU/*:*:*)
+	# other systems with GNU libc and userland
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	exit ;;
+    i*86:Minix:*:*)
+	echo ${UNAME_MACHINE}-pc-minix
+	exit ;;
+    arm*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    cris:Linux:*:*)
+	echo cris-axis-linux-gnu
+	exit ;;
+    crisv32:Linux:*:*)
+	echo crisv32-axis-linux-gnu
+	exit ;;
+    frv:Linux:*:*)
+    	echo frv-unknown-linux-gnu
+	exit ;;
+    ia64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m32r*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    m68*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    mips:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips
+	#undef mipsel
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mipsel
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    mips64:Linux:*:*)
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#undef CPU
+	#undef mips64
+	#undef mips64el
+	#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
+	CPU=mips64el
+	#else
+	#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
+	CPU=mips64
+	#else
+	CPU=
+	#endif
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=`
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	;;
+    ppc:Linux:*:*)
+	echo powerpc-unknown-linux-gnu
+	exit ;;
+    ppc64:Linux:*:*)
+	echo powerpc64-unknown-linux-gnu
+	exit ;;
+    alpha:Linux:*:*)
+	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
+	  EV5)   UNAME_MACHINE=alphaev5 ;;
+	  EV56)  UNAME_MACHINE=alphaev56 ;;
+	  PCA56) UNAME_MACHINE=alphapca56 ;;
+	  PCA57) UNAME_MACHINE=alphapca56 ;;
+	  EV6)   UNAME_MACHINE=alphaev6 ;;
+	  EV67)  UNAME_MACHINE=alphaev67 ;;
+	  EV68*) UNAME_MACHINE=alphaev68 ;;
+        esac
+	objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null
+	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	exit ;;
+    parisc:Linux:*:* | hppa:Linux:*:*)
+	# Look for CPU level
+	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
+	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-gnu ;;
+	esac
+	exit ;;
+    parisc64:Linux:*:* | hppa64:Linux:*:*)
+	echo hppa64-unknown-linux-gnu
+	exit ;;
+    s390:Linux:*:* | s390x:Linux:*:*)
+	echo ${UNAME_MACHINE}-ibm-linux
+	exit ;;
+    sh64*:Linux:*:*)
+    	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sh*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    sparc:Linux:*:* | sparc64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	exit ;;
+    x86_64:Linux:*:*)
+	echo x86_64-unknown-linux-gnu
+	exit ;;
+    i*86:Linux:*:*)
+	# The BFD linker knows what the default object file format is, so
+	# first see if it will tell us. cd to the root directory to prevent
+	# problems with other programs or directories called `ld' in the path.
+	# Set LC_ALL=C to ensure ld outputs messages in English.
+	ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \
+			 | sed -ne '/supported targets:/!d
+				    s/[ 	][ 	]*/ /g
+				    s/.*supported targets: *//
+				    s/ .*//
+				    p'`
+        case "$ld_supported_targets" in
+	  elf32-i386)
+		TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu"
+		;;
+	  a.out-i386-linux)
+		echo "${UNAME_MACHINE}-pc-linux-gnuaout"
+		exit ;;
+	  coff-i386)
+		echo "${UNAME_MACHINE}-pc-linux-gnucoff"
+		exit ;;
+	  "")
+		# Either a pre-BFD a.out linker (linux-gnuoldld) or
+		# one that does not give us useful --help.
+		echo "${UNAME_MACHINE}-pc-linux-gnuoldld"
+		exit ;;
+	esac
+	# Determine whether the default compiler is a.out or elf
+	eval $set_cc_for_build
+	sed 's/^	//' << EOF >$dummy.c
+	#include <features.h>
+	#ifdef __ELF__
+	# ifdef __GLIBC__
+	#  if __GLIBC__ >= 2
+	LIBC=gnu
+	#  else
+	LIBC=gnulibc1
+	#  endif
+	# else
+	LIBC=gnulibc1
+	# endif
+	#else
+	#ifdef __INTEL_COMPILER
+	LIBC=gnu
+	#else
+	LIBC=gnuaout
+	#endif
+	#endif
+	#ifdef __dietlibc__
+	LIBC=dietlibc
+	#endif
+EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=`
+	test x"${LIBC}" != x && {
+		echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
+		exit
+	}
+	test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; }
+	;;
+    i*86:DYNIX/ptx:4*:*)
+	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
+	# earlier versions are messed up and put the nodename in both
+	# sysname and nodename.
+	echo i386-sequent-sysv4
+	exit ;;
+    i*86:UNIX_SV:4.2MP:2.*)
+        # Unixware is an offshoot of SVR4, but it has its own version
+        # number series starting with 2...
+        # I am not positive that other SVR4 systems won't match this,
+	# I just have to hope.  -- rms.
+        # Use sysv4.2uw... so that sysv4* matches it.
+	echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION}
+	exit ;;
+    i*86:OS/2:*:*)
+	# If we were able to find `uname', then EMX Unix compatibility
+	# is probably installed.
+	echo ${UNAME_MACHINE}-pc-os2-emx
+	exit ;;
+    i*86:XTS-300:*:STOP)
+	echo ${UNAME_MACHINE}-unknown-stop
+	exit ;;
+    i*86:atheos:*:*)
+	echo ${UNAME_MACHINE}-unknown-atheos
+	exit ;;
+    i*86:syllable:*:*)
+	echo ${UNAME_MACHINE}-pc-syllable
+	exit ;;
+    i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*)
+	echo i386-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    i*86:*DOS:*:*)
+	echo ${UNAME_MACHINE}-pc-msdosdjgpp
+	exit ;;
+    i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*)
+	UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'`
+	if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
+		echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL}
+	else
+		echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL}
+	fi
+	exit ;;
+    i*86:*:5:[678]*)
+    	# UnixWare 7.x, OpenUNIX and OpenServer 6.
+	case `/bin/uname -X | grep "^Machine"` in
+	    *486*)	     UNAME_MACHINE=i486 ;;
+	    *Pentium)	     UNAME_MACHINE=i586 ;;
+	    *Pent*|*Celeron) UNAME_MACHINE=i686 ;;
+	esac
+	echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
+	exit ;;
+    i*86:*:3.2:*)
+	if test -f /usr/options/cb.name; then
+		UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name`
+		echo ${UNAME_MACHINE}-pc-isc$UNAME_REL
+	elif /bin/uname -X 2>/dev/null >/dev/null ; then
+		UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
+		(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
+		(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
+			&& UNAME_MACHINE=i586
+		(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
+			&& UNAME_MACHINE=i686
+		echo ${UNAME_MACHINE}-pc-sco$UNAME_REL
+	else
+		echo ${UNAME_MACHINE}-pc-sysv32
+	fi
+	exit ;;
+    pc:*:*:*)
+	# Left here for compatibility:
+        # uname -m prints for DJGPP always 'pc', but it prints nothing about
+        # the processor, so we play safe by assuming i386.
+	echo i386-pc-msdosdjgpp
+        exit ;;
+    Intel:Mach:3*:*)
+	echo i386-pc-mach3
+	exit ;;
+    paragon:*:*:*)
+	echo i860-intel-osf1
+	exit ;;
+    i860:*:4.*:*) # i860-SVR4
+	if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
+	  echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4
+	else # Add other i860-SVR4 vendors below as they are discovered.
+	  echo i860-unknown-sysv${UNAME_RELEASE}  # Unknown i860-SVR4
+	fi
+	exit ;;
+    mini*:CTIX:SYS*5:*)
+	# "miniframe"
+	echo m68010-convergent-sysv
+	exit ;;
+    mc68k:UNIX:SYSTEM5:3.51m)
+	echo m68k-convergent-sysv
+	exit ;;
+    M680?0:D-NIX:5.3:*)
+	echo m68k-diab-dnix
+	exit ;;
+    M68*:*:R3V[5678]*:*)
+	test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
+    3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
+	OS_REL=''
+	test -r /etc/.relid \
+	&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
+	/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+	  && { echo i486-ncr-sysv4.3${OS_REL}; exit; }
+	/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
+	  && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;;
+    3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
+        /bin/uname -p 2>/dev/null | grep 86 >/dev/null \
+          && { echo i486-ncr-sysv4; exit; } ;;
+    m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
+	echo m68k-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    mc68030:UNIX_System_V:4.*:*)
+	echo m68k-atari-sysv4
+	exit ;;
+    TSUNAMI:LynxOS:2.*:*)
+	echo sparc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    rs6000:LynxOS:2.*:*)
+	echo rs6000-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*)
+	echo powerpc-unknown-lynxos${UNAME_RELEASE}
+	exit ;;
+    SM[BE]S:UNIX_SV:*:*)
+	echo mips-dde-sysv${UNAME_RELEASE}
+	exit ;;
+    RM*:ReliantUNIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    RM*:SINIX-*:*:*)
+	echo mips-sni-sysv4
+	exit ;;
+    *:SINIX-*:*:*)
+	if uname -p 2>/dev/null >/dev/null ; then
+		UNAME_MACHINE=`(uname -p) 2>/dev/null`
+		echo ${UNAME_MACHINE}-sni-sysv4
+	else
+		echo ns32k-sni-sysv
+	fi
+	exit ;;
+    PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort
+                      # says <Richard.M.Bartel@ccMail.Census.GOV>
+        echo i586-unisys-sysv4
+        exit ;;
+    *:UNIX_System_V:4*:FTX*)
+	# From Gerald Hewes <hewes@openmarket.com>.
+	# How about differentiating between stratus architectures? -djm
+	echo hppa1.1-stratus-sysv4
+	exit ;;
+    *:*:*:FTX*)
+	# From seanf@swdc.stratus.com.
+	echo i860-stratus-sysv4
+	exit ;;
+    i*86:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo ${UNAME_MACHINE}-stratus-vos
+	exit ;;
+    *:VOS:*:*)
+	# From Paul.Green@stratus.com.
+	echo hppa1.1-stratus-vos
+	exit ;;
+    mc68*:A/UX:*:*)
+	echo m68k-apple-aux${UNAME_RELEASE}
+	exit ;;
+    news*:NEWS-OS:6*:*)
+	echo mips-sony-newsos6
+	exit ;;
+    R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
+	if [ -d /usr/nec ]; then
+	        echo mips-nec-sysv${UNAME_RELEASE}
+	else
+	        echo mips-unknown-sysv${UNAME_RELEASE}
+	fi
+        exit ;;
+    BeBox:BeOS:*:*)	# BeOS running on hardware made by Be, PPC only.
+	echo powerpc-be-beos
+	exit ;;
+    BeMac:BeOS:*:*)	# BeOS running on Mac or Mac clone, PPC only.
+	echo powerpc-apple-beos
+	exit ;;
+    BePC:BeOS:*:*)	# BeOS running on Intel PC compatible.
+	echo i586-pc-beos
+	exit ;;
+    SX-4:SUPER-UX:*:*)
+	echo sx4-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-5:SUPER-UX:*:*)
+	echo sx5-nec-superux${UNAME_RELEASE}
+	exit ;;
+    SX-6:SUPER-UX:*:*)
+	echo sx6-nec-superux${UNAME_RELEASE}
+	exit ;;
+    Power*:Rhapsody:*:*)
+	echo powerpc-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Rhapsody:*:*)
+	echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE}
+	exit ;;
+    *:Darwin:*:*)
+	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
+	case $UNAME_PROCESSOR in
+	    *86) UNAME_PROCESSOR=i686 ;;
+	    unknown) UNAME_PROCESSOR=powerpc ;;
+	esac
+	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
+	exit ;;
+    *:procnto*:*:* | *:QNX:[0123456789]*:*)
+	UNAME_PROCESSOR=`uname -p`
+	if test "$UNAME_PROCESSOR" = "x86"; then
+		UNAME_PROCESSOR=i386
+		UNAME_MACHINE=pc
+	fi
+	echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE}
+	exit ;;
+    *:QNX:*:4*)
+	echo i386-pc-qnx
+	exit ;;
+    NSE-?:NONSTOP_KERNEL:*:*)
+	echo nse-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    NSR-?:NONSTOP_KERNEL:*:*)
+	echo nsr-tandem-nsk${UNAME_RELEASE}
+	exit ;;
+    *:NonStop-UX:*:*)
+	echo mips-compaq-nonstopux
+	exit ;;
+    BS2000:POSIX*:*:*)
+	echo bs2000-siemens-sysv
+	exit ;;
+    DS/*:UNIX_System_V:*:*)
+	echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE}
+	exit ;;
+    *:Plan9:*:*)
+	# "uname -m" is not consistent, so use $cputype instead. 386
+	# is converted to i386 for consistency with other x86
+	# operating systems.
+	if test "$cputype" = "386"; then
+	    UNAME_MACHINE=i386
+	else
+	    UNAME_MACHINE="$cputype"
+	fi
+	echo ${UNAME_MACHINE}-unknown-plan9
+	exit ;;
+    *:TOPS-10:*:*)
+	echo pdp10-unknown-tops10
+	exit ;;
+    *:TENEX:*:*)
+	echo pdp10-unknown-tenex
+	exit ;;
+    KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
+	echo pdp10-dec-tops20
+	exit ;;
+    XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
+	echo pdp10-xkl-tops20
+	exit ;;
+    *:TOPS-20:*:*)
+	echo pdp10-unknown-tops20
+	exit ;;
+    *:ITS:*:*)
+	echo pdp10-unknown-its
+	exit ;;
+    SEI:*:*:SEIUX)
+        echo mips-sei-seiux${UNAME_RELEASE}
+	exit ;;
+    *:DragonFly:*:*)
+	echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
+	exit ;;
+    *:*VMS:*:*)
+    	UNAME_MACHINE=`(uname -p) 2>/dev/null`
+	case "${UNAME_MACHINE}" in
+	    A*) echo alpha-dec-vms ; exit ;;
+	    I*) echo ia64-dec-vms ; exit ;;
+	    V*) echo vax-dec-vms ; exit ;;
+	esac ;;
+    *:XENIX:*:SysV)
+	echo i386-pc-xenix
+	exit ;;
+    i*86:skyos:*:*)
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	exit ;;
+esac
+
+#echo '(No uname command or uname output not recognized.)' 1>&2
+#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2
+
+eval $set_cc_for_build
+cat >$dummy.c <<EOF
+#ifdef _SEQUENT_
+# include <sys/types.h>
+# include <sys/utsname.h>
+#endif
+main ()
+{
+#if defined (sony)
+#if defined (MIPSEB)
+  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
+     I don't know....  */
+  printf ("mips-sony-bsd\n"); exit (0);
+#else
+#include <sys/param.h>
+  printf ("m68k-sony-newsos%s\n",
+#ifdef NEWSOS4
+          "4"
+#else
+	  ""
+#endif
+         ); exit (0);
+#endif
+#endif
+
+#if defined (__arm) && defined (__acorn) && defined (__unix)
+  printf ("arm-acorn-riscix\n"); exit (0);
+#endif
+
+#if defined (hp300) && !defined (hpux)
+  printf ("m68k-hp-bsd\n"); exit (0);
+#endif
+
+#if defined (NeXT)
+#if !defined (__ARCHITECTURE__)
+#define __ARCHITECTURE__ "m68k"
+#endif
+  int version;
+  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
+  if (version < 4)
+    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
+  else
+    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
+  exit (0);
+#endif
+
+#if defined (MULTIMAX) || defined (n16)
+#if defined (UMAXV)
+  printf ("ns32k-encore-sysv\n"); exit (0);
+#else
+#if defined (CMU)
+  printf ("ns32k-encore-mach\n"); exit (0);
+#else
+  printf ("ns32k-encore-bsd\n"); exit (0);
+#endif
+#endif
+#endif
+
+#if defined (__386BSD__)
+  printf ("i386-pc-bsd\n"); exit (0);
+#endif
+
+#if defined (sequent)
+#if defined (i386)
+  printf ("i386-sequent-dynix\n"); exit (0);
+#endif
+#if defined (ns32000)
+  printf ("ns32k-sequent-dynix\n"); exit (0);
+#endif
+#endif
+
+#if defined (_SEQUENT_)
+    struct utsname un;
+
+    uname(&un);
+
+    if (strncmp(un.version, "V2", 2) == 0) {
+	printf ("i386-sequent-ptx2\n"); exit (0);
+    }
+    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
+	printf ("i386-sequent-ptx1\n"); exit (0);
+    }
+    printf ("i386-sequent-ptx\n"); exit (0);
+
+#endif
+
+#if defined (vax)
+# if !defined (ultrix)
+#  include <sys/param.h>
+#  if defined (BSD)
+#   if BSD == 43
+      printf ("vax-dec-bsd4.3\n"); exit (0);
+#   else
+#    if BSD == 199006
+      printf ("vax-dec-bsd4.3reno\n"); exit (0);
+#    else
+      printf ("vax-dec-bsd\n"); exit (0);
+#    endif
+#   endif
+#  else
+    printf ("vax-dec-bsd\n"); exit (0);
+#  endif
+# else
+    printf ("vax-dec-ultrix\n"); exit (0);
+# endif
+#endif
+
+#if defined (alliant) && defined (i860)
+  printf ("i860-alliant-bsd\n"); exit (0);
+#endif
+
+  exit (1);
+}
+EOF
+
+$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
+	{ echo "$SYSTEM_NAME"; exit; }
+
+# Apollos put the system type in the environment.
+
+test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
+
+# Convex versions that predate uname can use getsysinfo(1)
+
+if [ -x /usr/convex/getsysinfo ]
+then
+    case `getsysinfo -f cpu_type` in
+    c1*)
+	echo c1-convex-bsd
+	exit ;;
+    c2*)
+	if getsysinfo -f scalar_acc
+	then echo c32-convex-bsd
+	else echo c2-convex-bsd
+	fi
+	exit ;;
+    c34*)
+	echo c34-convex-bsd
+	exit ;;
+    c38*)
+	echo c38-convex-bsd
+	exit ;;
+    c4*)
+	echo c4-convex-bsd
+	exit ;;
+    esac
+fi
+
+cat >&2 <<EOF
+$0: unable to guess system type
+
+This script, last modified $timestamp, has failed to recognize
+the operating system you are using. It is advised that you
+download the most up to date version of the config scripts from
+
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess
+and
+  http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub
+
+If the version you run ($0) is already up to date, please
+send the following data and any information you think might be
+pertinent to <config-patches@gnu.org> in order to provide the needed
+information to handle your system.
+
+config.guess timestamp = $timestamp
+
+uname -m = `(uname -m) 2>/dev/null || echo unknown`
+uname -r = `(uname -r) 2>/dev/null || echo unknown`
+uname -s = `(uname -s) 2>/dev/null || echo unknown`
+uname -v = `(uname -v) 2>/dev/null || echo unknown`
+
+/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
+/bin/uname -X     = `(/bin/uname -X) 2>/dev/null`
+
+hostinfo               = `(hostinfo) 2>/dev/null`
+/bin/universe          = `(/bin/universe) 2>/dev/null`
+/usr/bin/arch -k       = `(/usr/bin/arch -k) 2>/dev/null`
+/bin/arch              = `(/bin/arch) 2>/dev/null`
+/usr/bin/oslevel       = `(/usr/bin/oslevel) 2>/dev/null`
+/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
+
+UNAME_MACHINE = ${UNAME_MACHINE}
+UNAME_RELEASE = ${UNAME_RELEASE}
+UNAME_SYSTEM  = ${UNAME_SYSTEM}
+UNAME_VERSION = ${UNAME_VERSION}
+EOF
+
+exit 1
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:

deps/sqlite3/config.sub

+#! /bin/sh
+# Configuration validation subroutine script.
+#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+timestamp='2005-07-08'
+
+# This file is (in principle) common to ALL GNU software.
+# The presence of a machine in this file suggests that SOME GNU software
+# can handle that machine.  It does not imply ALL GNU software can.
+#
+# This file is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA
+# 02110-1301, USA.
+#
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+
+# Please send patches to <config-patches@gnu.org>.  Submit a context
+# diff and a properly formatted ChangeLog entry.
+#
+# Configuration subroutine to validate and canonicalize a configuration type.
+# Supply the specified configuration type as an argument.
+# If it is invalid, we print an error message on stderr and exit with code 1.
+# Otherwise, we print the canonical config type on stdout and succeed.
+
+# This file is supposed to be the same for all GNU packages
+# and recognize all the CPU types, system types and aliases
+# that are meaningful with *any* GNU software.
+# Each package is responsible for reporting which valid configurations
+# it does not support.  The user should be able to distinguish
+# a failure to support a valid configuration from a meaningless
+# configuration.
+
+# The goal of this file is to map all the various variations of a given
+# machine specification into a single specification in the form:
+#	CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM
+# or in some cases, the newer four-part form:
+#	CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM
+# It is wrong to echo any other type of specification.
+
+me=`echo "$0" | sed -e 's,.*/,,'`
+
+usage="\
+Usage: $0 [OPTION] CPU-MFR-OPSYS
+       $0 [OPTION] ALIAS
+
+Canonicalize a configuration name.
+
+Operation modes:
+  -h, --help         print this help, then exit
+  -t, --time-stamp   print date of last modification, then exit
+  -v, --version      print version number, then exit
+
+Report bugs and patches to <config-patches@gnu.org>."
+
+version="\
+GNU config.sub ($timestamp)
+
+Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
+Free Software Foundation, Inc.
+
+This is free software; see the source for copying conditions.  There is NO
+warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
+
+help="
+Try \`$me --help' for more information."
+
+# Parse command line
+while test $# -gt 0 ; do
+  case $1 in
+    --time-stamp | --time* | -t )
+       echo "$timestamp" ; exit ;;
+    --version | -v )
+       echo "$version" ; exit ;;
+    --help | --h* | -h )
+       echo "$usage"; exit ;;
+    -- )     # Stop option processing
+       shift; break ;;
+    - )	# Use stdin as input.
+       break ;;
+    -* )
+       echo "$me: invalid option $1$help"
+       exit 1 ;;
+
+    *local*)
+       # First pass through any local machine types.
+       echo $1
+       exit ;;
+
+    * )
+       break ;;
+  esac
+done
+
+case $# in
+ 0) echo "$me: missing argument$help" >&2
+    exit 1;;
+ 1) ;;
+ *) echo "$me: too many arguments$help" >&2
+    exit 1;;
+esac
+
+# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any).
+# Here we must recognize all the valid KERNEL-OS combinations.
+maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
+case $maybe_os in
+  nto-qnx* | linux-gnu* | linux-dietlibc | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | \
+  kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*)
+    os=-$maybe_os
+    basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
+    ;;
+  *)
+    basic_machine=`echo $1 | sed 's/-[^-]*$//'`
+    if [ $basic_machine != $1 ]
+    then os=`echo $1 | sed 's/.*-/-/'`
+    else os=; fi
+    ;;
+esac
+
+### Let's recognize common machines as not being operating systems so
+### that things like config.sub decstation-3100 work.  We also
+### recognize some manufacturers as not being operating systems, so we
+### can provide default operating systems below.
+case $os in
+	-sun*os*)
+		# Prevent following clause from handling this invalid input.
+		;;
+	-dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \
+	-att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \
+	-unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \
+	-convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\
+	-c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \
+	-harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \
+	-apple | -axis | -knuth | -cray)
+		os=
+		basic_machine=$1
+		;;
+	-sim | -cisco | -oki | -wec | -winbond)
+		os=
+		basic_machine=$1
+		;;
+	-scout)
+		;;
+	-wrs)
+		os=-vxworks
+		basic_machine=$1
+		;;
+	-chorusos*)
+		os=-chorusos
+		basic_machine=$1
+		;;
+ 	-chorusrdb)
+ 		os=-chorusrdb
+		basic_machine=$1
+ 		;;
+	-hiux*)
+		os=-hiuxwe2
+		;;
+	-sco5)
+		os=-sco3.2v5
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco4)
+		os=-sco3.2v4
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2.[4-9]*)
+		os=`echo $os | sed -e 's/sco3.2./sco3.2v/'`
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco3.2v[4-9]*)
+		# Don't forget version if it is 3.2v4 or newer.
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-sco*)
+		os=-sco3.2v2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-udk*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-isc)
+		os=-isc2.2
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-clix*)
+		basic_machine=clipper-intergraph
+		;;
+	-isc*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'`
+		;;
+	-lynx*)
+		os=-lynxos
+		;;
+	-ptx*)
+		basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'`
+		;;
+	-windowsnt*)
+		os=`echo $os | sed -e 's/windowsnt/winnt/'`
+		;;
+	-psos*)
+		os=-psos
+		;;
+	-mint | -mint[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+esac
+
+# Decode aliases for certain CPU-COMPANY combinations.
+case $basic_machine in
+	# Recognize the basic CPU types without company name.
+	# Some are omitted here because they have special meanings below.
+	1750a | 580 \
+	| a29k \
+	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
+	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
+	| am33_2.0 \
+	| arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \
+	| bfin \
+	| c4x | clipper \
+	| d10v | d30v | dlx | dsp16xx \
+	| fr30 | frv \
+	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
+	| i370 | i860 | i960 | ia64 \
+	| ip2k | iq2000 \
+	| m32r | m32rle | m68000 | m68k | m88k | maxq | mcore \
+	| mips | mipsbe | mipseb | mipsel | mipsle \
+	| mips16 \
+	| mips64 | mips64el \
+	| mips64vr | mips64vrel \
+	| mips64orion | mips64orionel \
+	| mips64vr4100 | mips64vr4100el \
+	| mips64vr4300 | mips64vr4300el \
+	| mips64vr5000 | mips64vr5000el \
+	| mips64vr5900 | mips64vr5900el \
+	| mipsisa32 | mipsisa32el \
+	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa64 | mipsisa64el \
+	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64sb1 | mipsisa64sb1el \
+	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipstx39 | mipstx39el \
+	| mn10200 | mn10300 \
+	| ms1 \
+	| msp430 \
+	| ns16k | ns32k \
+	| or32 \
+	| pdp10 | pdp11 | pj | pjl \
+	| powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \
+	| pyramid \
+	| sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \
+	| sh64 | sh64le \
+	| sparc | sparc64 | sparc64b | sparc86x | sparclet | sparclite \
+	| sparcv8 | sparcv9 | sparcv9b \
+	| strongarm \
+	| tahoe | thumb | tic4x | tic80 | tron \
+	| v850 | v850e \
+	| we32k \
+	| x86 | xscale | xscalee[bl] | xstormy16 | xtensa \
+	| z8k)
+		basic_machine=$basic_machine-unknown
+		;;
+	m32c)
+		basic_machine=$basic_machine-unknown
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12)
+		# Motorola 68HC11/12.
+		basic_machine=$basic_machine-unknown
+		os=-none
+		;;
+	m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k)
+		;;
+
+	# We use `pc' rather than `unknown'
+	# because (1) that's what they normally are, and
+	# (2) the word "unknown" tends to confuse beginning users.
+	i*86 | x86_64)
+	  basic_machine=$basic_machine-pc
+	  ;;
+	# Object if more than one company name word.
+	*-*-*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+	# Recognize the basic CPU types with company name.
+	580-* \
+	| a29k-* \
+	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
+	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
+	| avr-* \
+	| bfin-* | bs2000-* \
+	| c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \
+	| clipper-* | craynv-* | cydra-* \
+	| d10v-* | d30v-* | dlx-* \
+	| elxsi-* \
+	| f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \
+	| h8300-* | h8500-* \
+	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
+	| i*86-* | i860-* | i960-* | ia64-* \
+	| ip2k-* | iq2000-* \
+	| m32r-* | m32rle-* \
+	| m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \
+	| m88110-* | m88k-* | maxq-* | mcore-* \
+	| mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \
+	| mips16-* \
+	| mips64-* | mips64el-* \
+	| mips64vr-* | mips64vrel-* \
+	| mips64orion-* | mips64orionel-* \
+	| mips64vr4100-* | mips64vr4100el-* \
+	| mips64vr4300-* | mips64vr4300el-* \
+	| mips64vr5000-* | mips64vr5000el-* \
+	| mips64vr5900-* | mips64vr5900el-* \
+	| mipsisa32-* | mipsisa32el-* \
+	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa64-* | mipsisa64el-* \
+	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64sb1-* | mipsisa64sb1el-* \
+	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipstx39-* | mipstx39el-* \
+	| mmix-* \
+	| ms1-* \
+	| msp430-* \
+	| none-* | np1-* | ns16k-* | ns32k-* \
+	| orion-* \
+	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
+	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \
+	| pyramid-* \
+	| romp-* | rs6000-* \
+	| sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | shbe-* \
+	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
+	| sparc-* | sparc64-* | sparc64b-* | sparc86x-* | sparclet-* \
+	| sparclite-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \
+	| tahoe-* | thumb-* \
+	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
+	| tron-* \
+	| v850-* | v850e-* | vax-* \
+	| we32k-* \
+	| x86-* | x86_64-* | xps100-* | xscale-* | xscalee[bl]-* \
+	| xstormy16-* | xtensa-* \
+	| ymp-* \
+	| z8k-*)
+		;;
+	m32c-*)
+		;;
+	# Recognize the various machine names and aliases which stand
+	# for a CPU type and a company and sometimes even an OS.
+	386bsd)
+		basic_machine=i386-unknown
+		os=-bsd
+		;;
+	3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc)
+		basic_machine=m68000-att
+		;;
+	3b*)
+		basic_machine=we32k-att
+		;;
+	a29khif)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+    	abacus)
+		basic_machine=abacus-unknown
+		;;
+	adobe68k)
+		basic_machine=m68010-adobe
+		os=-scout
+		;;
+	alliant | fx80)
+		basic_machine=fx80-alliant
+		;;
+	altos | altos3068)
+		basic_machine=m68k-altos
+		;;
+	am29k)
+		basic_machine=a29k-none
+		os=-bsd
+		;;
+	amd64)
+		basic_machine=x86_64-pc
+		;;
+	amd64-*)
+		basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	amdahl)
+		basic_machine=580-amdahl
+		os=-sysv
+		;;
+	amiga | amiga-*)
+		basic_machine=m68k-unknown
+		;;
+	amigaos | amigados)
+		basic_machine=m68k-unknown
+		os=-amigaos
+		;;
+	amigaunix | amix)
+		basic_machine=m68k-unknown
+		os=-sysv4
+		;;
+	apollo68)
+		basic_machine=m68k-apollo
+		os=-sysv
+		;;
+	apollo68bsd)
+		basic_machine=m68k-apollo
+		os=-bsd
+		;;
+	aux)
+		basic_machine=m68k-apple
+		os=-aux
+		;;
+	balance)
+		basic_machine=ns32k-sequent
+		os=-dynix
+		;;
+	c90)
+		basic_machine=c90-cray
+		os=-unicos
+		;;
+	convex-c1)
+		basic_machine=c1-convex
+		os=-bsd
+		;;
+	convex-c2)
+		basic_machine=c2-convex
+		os=-bsd
+		;;
+	convex-c32)
+		basic_machine=c32-convex
+		os=-bsd
+		;;
+	convex-c34)
+		basic_machine=c34-convex
+		os=-bsd
+		;;
+	convex-c38)
+		basic_machine=c38-convex
+		os=-bsd
+		;;
+	cray | j90)
+		basic_machine=j90-cray
+		os=-unicos
+		;;
+	craynv)
+		basic_machine=craynv-cray
+		os=-unicosmp
+		;;
+	cr16c)
+		basic_machine=cr16c-unknown
+		os=-elf
+		;;
+	crds | unos)
+		basic_machine=m68k-crds
+		;;
+	crisv32 | crisv32-* | etraxfs*)
+		basic_machine=crisv32-axis
+		;;
+	cris | cris-* | etrax*)
+		basic_machine=cris-axis
+		;;
+	crx)
+		basic_machine=crx-unknown
+		os=-elf
+		;;
+	da30 | da30-*)
+		basic_machine=m68k-da30
+		;;
+	decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn)
+		basic_machine=mips-dec
+		;;
+	decsystem10* | dec10*)
+		basic_machine=pdp10-dec
+		os=-tops10
+		;;
+	decsystem20* | dec20*)
+		basic_machine=pdp10-dec
+		os=-tops20
+		;;
+	delta | 3300 | motorola-3300 | motorola-delta \
+	      | 3300-motorola | delta-motorola)
+		basic_machine=m68k-motorola
+		;;
+	delta88)
+		basic_machine=m88k-motorola
+		os=-sysv3
+		;;
+	djgpp)
+		basic_machine=i586-pc
+		os=-msdosdjgpp
+		;;
+	dpx20 | dpx20-*)
+		basic_machine=rs6000-bull
+		os=-bosx
+		;;
+	dpx2* | dpx2*-bull)
+		basic_machine=m68k-bull
+		os=-sysv3
+		;;
+	ebmon29k)
+		basic_machine=a29k-amd
+		os=-ebmon
+		;;
+	elxsi)
+		basic_machine=elxsi-elxsi
+		os=-bsd
+		;;
+	encore | umax | mmax)
+		basic_machine=ns32k-encore
+		;;
+	es1800 | OSE68k | ose68k | ose | OSE)
+		basic_machine=m68k-ericsson
+		os=-ose
+		;;
+	fx2800)
+		basic_machine=i860-alliant
+		;;
+	genix)
+		basic_machine=ns32k-ns
+		;;
+	gmicro)
+		basic_machine=tron-gmicro
+		os=-sysv
+		;;
+	go32)
+		basic_machine=i386-pc
+		os=-go32
+		;;
+	h3050r* | hiux*)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	h8300hms)
+		basic_machine=h8300-hitachi
+		os=-hms
+		;;
+	h8300xray)
+		basic_machine=h8300-hitachi
+		os=-xray
+		;;
+	h8500hms)
+		basic_machine=h8500-hitachi
+		os=-hms
+		;;
+	harris)
+		basic_machine=m88k-harris
+		os=-sysv3
+		;;
+	hp300-*)
+		basic_machine=m68k-hp
+		;;
+	hp300bsd)
+		basic_machine=m68k-hp
+		os=-bsd
+		;;
+	hp300hpux)
+		basic_machine=m68k-hp
+		os=-hpux
+		;;
+	hp3k9[0-9][0-9] | hp9[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k2[0-9][0-9] | hp9k31[0-9])
+		basic_machine=m68000-hp
+		;;
+	hp9k3[2-9][0-9])
+		basic_machine=m68k-hp
+		;;
+	hp9k6[0-9][0-9] | hp6[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hp9k7[0-79][0-9] | hp7[0-79][0-9])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k78[0-9] | hp78[0-9])
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893)
+		# FIXME: really hppa2.0-hp
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][13679] | hp8[0-9][13679])
+		basic_machine=hppa1.1-hp
+		;;
+	hp9k8[0-9][0-9] | hp8[0-9][0-9])
+		basic_machine=hppa1.0-hp
+		;;
+	hppa-next)
+		os=-nextstep3
+		;;
+	hppaosf)
+		basic_machine=hppa1.1-hp
+		os=-osf
+		;;
+	hppro)
+		basic_machine=hppa1.1-hp
+		os=-proelf
+		;;
+	i370-ibm* | ibm*)
+		basic_machine=i370-ibm
+		;;
+# I'm not sure what "Sysv32" means.  Should this be sysv3.2?
+	i*86v32)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv32
+		;;
+	i*86v4*)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv4
+		;;
+	i*86v)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-sysv
+		;;
+	i*86sol2)
+		basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'`
+		os=-solaris2
+		;;
+	i386mach)
+		basic_machine=i386-mach
+		os=-mach
+		;;
+	i386-vsta | vsta)
+		basic_machine=i386-unknown
+		os=-vsta
+		;;
+	iris | iris4d)
+		basic_machine=mips-sgi
+		case $os in
+		    -irix*)
+			;;
+		    *)
+			os=-irix4
+			;;
+		esac
+		;;
+	isi68 | isi)
+		basic_machine=m68k-isi
+		os=-sysv
+		;;
+	m88k-omron*)
+		basic_machine=m88k-omron
+		;;
+	magnum | m3230)
+		basic_machine=mips-mips
+		os=-sysv
+		;;
+	merlin)
+		basic_machine=ns32k-utek
+		os=-sysv
+		;;
+	mingw32)
+		basic_machine=i386-pc
+		os=-mingw32
+		;;
+	miniframe)
+		basic_machine=m68000-convergent
+		;;
+	*mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*)
+		basic_machine=m68k-atari
+		os=-mint
+		;;
+	mips3*-*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`
+		;;
+	mips3*)
+		basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown
+		;;
+	monitor)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	morphos)
+		basic_machine=powerpc-unknown
+		os=-morphos
+		;;
+	msdos)
+		basic_machine=i386-pc
+		os=-msdos
+		;;
+	mvs)
+		basic_machine=i370-ibm
+		os=-mvs
+		;;
+	ncr3000)
+		basic_machine=i486-ncr
+		os=-sysv4
+		;;
+	netbsd386)
+		basic_machine=i386-unknown
+		os=-netbsd
+		;;
+	netwinder)
+		basic_machine=armv4l-rebel
+		os=-linux
+		;;
+	news | news700 | news800 | news900)
+		basic_machine=m68k-sony
+		os=-newsos
+		;;
+	news1000)
+		basic_machine=m68030-sony
+		os=-newsos
+		;;
+	news-3600 | risc-news)
+		basic_machine=mips-sony
+		os=-newsos
+		;;
+	necv70)
+		basic_machine=v70-nec
+		os=-sysv
+		;;
+	next | m*-next )
+		basic_machine=m68k-next
+		case $os in
+		    -nextstep* )
+			;;
+		    -ns2*)
+		      os=-nextstep2
+			;;
+		    *)
+		      os=-nextstep3
+			;;
+		esac
+		;;
+	nh3000)
+		basic_machine=m68k-harris
+		os=-cxux
+		;;
+	nh[45]000)
+		basic_machine=m88k-harris
+		os=-cxux
+		;;
+	nindy960)
+		basic_machine=i960-intel
+		os=-nindy
+		;;
+	mon960)
+		basic_machine=i960-intel
+		os=-mon960
+		;;
+	nonstopux)
+		basic_machine=mips-compaq
+		os=-nonstopux
+		;;
+	np1)
+		basic_machine=np1-gould
+		;;
+	nsr-tandem)
+		basic_machine=nsr-tandem
+		;;
+	op50n-* | op60c-*)
+		basic_machine=hppa1.1-oki
+		os=-proelf
+		;;
+	openrisc | openrisc-*)
+		basic_machine=or32-unknown
+		;;
+	os400)
+		basic_machine=powerpc-ibm
+		os=-os400
+		;;
+	OSE68000 | ose68000)
+		basic_machine=m68000-ericsson
+		os=-ose
+		;;
+	os68k)
+		basic_machine=m68k-none
+		os=-os68k
+		;;
+	pa-hitachi)
+		basic_machine=hppa1.1-hitachi
+		os=-hiuxwe2
+		;;
+	paragon)
+		basic_machine=i860-intel
+		os=-osf
+		;;
+	pbd)
+		basic_machine=sparc-tti
+		;;
+	pbb)
+		basic_machine=m68k-tti
+		;;
+	pc532 | pc532-*)
+		basic_machine=ns32k-pc532
+		;;
+	pentium | p5 | k5 | k6 | nexgen | viac3)
+		basic_machine=i586-pc
+		;;
+	pentiumpro | p6 | 6x86 | athlon | athlon_*)
+		basic_machine=i686-pc
+		;;
+	pentiumii | pentium2 | pentiumiii | pentium3)
+		basic_machine=i686-pc
+		;;
+	pentium4)
+		basic_machine=i786-pc
+		;;
+	pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*)
+		basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumpro-* | p6-* | 6x86-* | athlon-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*)
+		basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pentium4-*)
+		basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	pn)
+		basic_machine=pn-gould
+		;;
+	power)	basic_machine=power-ibm
+		;;
+	ppc)	basic_machine=powerpc-unknown
+		;;
+	ppc-*)	basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppcle | powerpclittle | ppc-le | powerpc-little)
+		basic_machine=powerpcle-unknown
+		;;
+	ppcle-* | powerpclittle-*)
+		basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64)	basic_machine=powerpc64-unknown
+		;;
+	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+		basic_machine=powerpc64le-unknown
+		;;
+	ppc64le-* | powerpc64little-*)
+		basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'`
+		;;
+	ps2)
+		basic_machine=i386-ibm
+		;;
+	pw32)
+		basic_machine=i586-unknown
+		os=-pw32
+		;;
+	rom68k)
+		basic_machine=m68k-rom68k
+		os=-coff
+		;;
+	rm[46]00)
+		basic_machine=mips-siemens
+		;;
+	rtpc | rtpc-*)
+		basic_machine=romp-ibm
+		;;
+	s390 | s390-*)
+		basic_machine=s390-ibm
+		;;
+	s390x | s390x-*)
+		basic_machine=s390x-ibm
+		;;
+	sa29200)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	sb1)
+		basic_machine=mipsisa64sb1-unknown
+		;;
+	sb1el)
+		basic_machine=mipsisa64sb1el-unknown
+		;;
+	sei)
+		basic_machine=mips-sei
+		os=-seiux
+		;;
+	sequent)
+		basic_machine=i386-sequent
+		;;
+	sh)
+		basic_machine=sh-hitachi
+		os=-hms
+		;;
+	sh64)
+		basic_machine=sh64-unknown
+		;;
+	sparclite-wrs | simso-wrs)
+		basic_machine=sparclite-wrs
+		os=-vxworks
+		;;
+	sps7)
+		basic_machine=m68k-bull
+		os=-sysv2
+		;;
+	spur)
+		basic_machine=spur-unknown
+		;;
+	st2000)
+		basic_machine=m68k-tandem
+		;;
+	stratus)
+		basic_machine=i860-stratus
+		os=-sysv4
+		;;
+	sun2)
+		basic_machine=m68000-sun
+		;;
+	sun2os3)
+		basic_machine=m68000-sun
+		os=-sunos3
+		;;
+	sun2os4)
+		basic_machine=m68000-sun
+		os=-sunos4
+		;;
+	sun3os3)
+		basic_machine=m68k-sun
+		os=-sunos3
+		;;
+	sun3os4)
+		basic_machine=m68k-sun
+		os=-sunos4
+		;;
+	sun4os3)
+		basic_machine=sparc-sun
+		os=-sunos3
+		;;
+	sun4os4)
+		basic_machine=sparc-sun
+		os=-sunos4
+		;;
+	sun4sol2)
+		basic_machine=sparc-sun
+		os=-solaris2
+		;;
+	sun3 | sun3-*)
+		basic_machine=m68k-sun
+		;;
+	sun4)
+		basic_machine=sparc-sun
+		;;
+	sun386 | sun386i | roadrunner)
+		basic_machine=i386-sun
+		;;
+	sv1)
+		basic_machine=sv1-cray
+		os=-unicos
+		;;
+	symmetry)
+		basic_machine=i386-sequent
+		os=-dynix
+		;;
+	t3e)
+		basic_machine=alphaev5-cray
+		os=-unicos
+		;;
+	t90)
+		basic_machine=t90-cray
+		os=-unicos
+		;;
+	tic54x | c54x*)
+		basic_machine=tic54x-unknown
+		os=-coff
+		;;
+	tic55x | c55x*)
+		basic_machine=tic55x-unknown
+		os=-coff
+		;;
+	tic6x | c6x*)
+		basic_machine=tic6x-unknown
+		os=-coff
+		;;
+	tx39)
+		basic_machine=mipstx39-unknown
+		;;
+	tx39el)
+		basic_machine=mipstx39el-unknown
+		;;
+	toad1)
+		basic_machine=pdp10-xkl
+		os=-tops20
+		;;
+	tower | tower-32)
+		basic_machine=m68k-ncr
+		;;
+	tpf)
+		basic_machine=s390x-ibm
+		os=-tpf
+		;;
+	udi29k)
+		basic_machine=a29k-amd
+		os=-udi
+		;;
+	ultra3)
+		basic_machine=a29k-nyu
+		os=-sym1
+		;;
+	v810 | necv810)
+		basic_machine=v810-nec
+		os=-none
+		;;
+	vaxv)
+		basic_machine=vax-dec
+		os=-sysv
+		;;
+	vms)
+		basic_machine=vax-dec
+		os=-vms
+		;;
+	vpp*|vx|vx-*)
+		basic_machine=f301-fujitsu
+		;;
+	vxworks960)
+		basic_machine=i960-wrs
+		os=-vxworks
+		;;
+	vxworks68)
+		basic_machine=m68k-wrs
+		os=-vxworks
+		;;
+	vxworks29k)
+		basic_machine=a29k-wrs
+		os=-vxworks
+		;;
+	w65*)
+		basic_machine=w65-wdc
+		os=-none
+		;;
+	w89k-*)
+		basic_machine=hppa1.1-winbond
+		os=-proelf
+		;;
+	xbox)
+		basic_machine=i686-pc
+		os=-mingw32
+		;;
+	xps | xps100)
+		basic_machine=xps100-honeywell
+		;;
+	ymp)
+		basic_machine=ymp-cray
+		os=-unicos
+		;;
+	z8k-*-coff)
+		basic_machine=z8k-unknown
+		os=-sim
+		;;
+	none)
+		basic_machine=none-none
+		os=-none
+		;;
+
+# Here we handle the default manufacturer of certain CPU types.  It is in
+# some cases the only manufacturer, in others, it is the most popular.
+	w89k)
+		basic_machine=hppa1.1-winbond
+		;;
+	op50n)
+		basic_machine=hppa1.1-oki
+		;;
+	op60c)
+		basic_machine=hppa1.1-oki
+		;;
+	romp)
+		basic_machine=romp-ibm
+		;;
+	mmix)
+		basic_machine=mmix-knuth
+		;;
+	rs6000)
+		basic_machine=rs6000-ibm
+		;;
+	vax)
+		basic_machine=vax-dec
+		;;
+	pdp10)
+		# there are many clones, so DEC is not a safe bet
+		basic_machine=pdp10-unknown
+		;;
+	pdp11)
+		basic_machine=pdp11-dec
+		;;
+	we32k)
+		basic_machine=we32k-att
+		;;
+	sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele)
+		basic_machine=sh-unknown
+		;;
+	sparc | sparcv8 | sparcv9 | sparcv9b)
+		basic_machine=sparc-sun
+		;;
+	cydra)
+		basic_machine=cydra-cydrome
+		;;
+	orion)
+		basic_machine=orion-highlevel
+		;;
+	orion105)
+		basic_machine=clipper-highlevel
+		;;
+	mac | mpw | mac-mpw)
+		basic_machine=m68k-apple
+		;;
+	pmac | pmac-mpw)
+		basic_machine=powerpc-apple
+		;;
+	*-unknown)
+		# Make sure to match an already-canonicalized machine name.
+		;;
+	*)
+		echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2
+		exit 1
+		;;
+esac
+
+# Here we canonicalize certain aliases for manufacturers.
+case $basic_machine in
+	*-digital*)
+		basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'`
+		;;
+	*-commodore*)
+		basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'`
+		;;
+	*)
+		;;
+esac
+
+# Decode manufacturer-specific aliases for certain operating systems.
+
+if [ x"$os" != x"" ]
+then
+case $os in
+        # First match some system type aliases
+        # that might get confused with valid system types.
+	# -solaris* is a basic system type, with this one exception.
+	-solaris1 | -solaris1.*)
+		os=`echo $os | sed -e 's|solaris1|sunos4|'`
+		;;
+	-solaris)
+		os=-solaris2
+		;;
+	-svr4*)
+		os=-sysv4
+		;;
+	-unixware*)
+		os=-sysv4.2uw
+		;;
+	-gnu/linux*)
+		os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'`
+		;;
+	# First accept the basic system types.
+	# The portable systems comes first.
+	# Each alternative MUST END IN A *, to match a version number.
+	# -sysv* is not here because it comes later, after sysvr4.
+	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
+	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\
+	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \
+	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
+	      | -aos* \
+	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
+	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
+	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* | -openbsd* \
+	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
+	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
+	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
+	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
+	      | -chorusos* | -chorusrdb* \
+	      | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
+	      | -mingw32* | -linux-gnu* | -linux-uclibc* | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
+	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
+	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
+	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
+	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
+	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
+	      | -skyos* | -haiku*)
+	# Remember, each alternative MUST END IN *, to match a version number.
+		;;
+	-qnx*)
+		case $basic_machine in
+		    x86-* | i*86-*)
+			;;
+		    *)
+			os=-nto$os
+			;;
+		esac
+		;;
+	-nto-qnx*)
+		;;
+	-nto*)
+		os=`echo $os | sed -e 's|nto|nto-qnx|'`
+		;;
+	-sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \
+	      | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \
+	      | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*)
+		;;
+	-mac*)
+		os=`echo $os | sed -e 's|mac|macos|'`
+		;;
+	-linux-dietlibc)
+		os=-linux-dietlibc
+		;;
+	-linux*)
+		os=`echo $os | sed -e 's|linux|linux-gnu|'`
+		;;
+	-sunos5*)
+		os=`echo $os | sed -e 's|sunos5|solaris2|'`
+		;;
+	-sunos6*)
+		os=`echo $os | sed -e 's|sunos6|solaris3|'`
+		;;
+	-opened*)
+		os=-openedition
+		;;
+        -os400*)
+		os=-os400
+		;;
+	-wince*)
+		os=-wince
+		;;
+	-osfrose*)
+		os=-osfrose
+		;;
+	-osf*)
+		os=-osf
+		;;
+	-utek*)
+		os=-bsd
+		;;
+	-dynix*)
+		os=-bsd
+		;;
+	-acis*)
+		os=-aos
+		;;
+	-atheos*)
+		os=-atheos
+		;;
+	-syllable*)
+		os=-syllable
+		;;
+	-386bsd)
+		os=-bsd
+		;;
+	-ctix* | -uts*)
+		os=-sysv
+		;;
+	-nova*)
+		os=-rtmk-nova
+		;;
+	-ns2 )
+		os=-nextstep2
+		;;
+	-nsk*)
+		os=-nsk
+		;;
+	# Preserve the version number of sinix5.
+	-sinix5.*)
+		os=`echo $os | sed -e 's|sinix|sysv|'`
+		;;
+	-sinix*)
+		os=-sysv4
+		;;
+        -tpf*)
+		os=-tpf
+		;;
+	-triton*)
+		os=-sysv3
+		;;
+	-oss*)
+		os=-sysv3
+		;;
+	-svr4)
+		os=-sysv4
+		;;
+	-svr3)
+		os=-sysv3
+		;;
+	-sysvr4)
+		os=-sysv4
+		;;
+	# This must come after -sysvr4.
+	-sysv*)
+		;;
+	-ose*)
+		os=-ose
+		;;
+	-es1800*)
+		os=-ose
+		;;
+	-xenix)
+		os=-xenix
+		;;
+	-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+		os=-mint
+		;;
+	-aros*)
+		os=-aros
+		;;
+	-kaos*)
+		os=-kaos
+		;;
+	-zvmoe)
+		os=-zvmoe
+		;;
+	-none)
+		;;
+	*)
+		# Get rid of the `-' at the beginning of $os.
+		os=`echo $os | sed 's/[^-]*-//'`
+		echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2
+		exit 1
+		;;
+esac
+else
+
+# Here we handle the default operating systems that come with various machines.
+# The value should be what the vendor currently ships out the door with their
+# machine or put another way, the most popular os provided with the machine.
+
+# Note that if you're going to try to match "-MANUFACTURER" here (say,
+# "-sun"), then you have to tell the case statement up towards the top
+# that MANUFACTURER isn't an operating system.  Otherwise, code above
+# will signal an error saying that MANUFACTURER isn't an operating
+# system, and we'll never get to this point.
+
+case $basic_machine in
+	*-acorn)
+		os=-riscix1.2
+		;;
+	arm*-rebel)
+		os=-linux
+		;;
+	arm*-semi)
+		os=-aout
+		;;
+    c4x-* | tic4x-*)
+        os=-coff
+        ;;
+	# This must come before the *-dec entry.
+	pdp10-*)
+		os=-tops20
+		;;
+	pdp11-*)
+		os=-none
+		;;
+	*-dec | vax-*)
+		os=-ultrix4.2
+		;;
+	m68*-apollo)
+		os=-domain
+		;;
+	i386-sun)
+		os=-sunos4.0.2
+		;;
+	m68000-sun)
+		os=-sunos3
+		# This also exists in the configure program, but was not the
+		# default.
+		# os=-sunos4
+		;;
+	m68*-cisco)
+		os=-aout
+		;;
+	mips*-cisco)
+		os=-elf
+		;;
+	mips*-*)
+		os=-elf
+		;;
+	or32-*)
+		os=-coff
+		;;
+	*-tti)	# must be before sparc entry or we get the wrong os.
+		os=-sysv3
+		;;
+	sparc-* | *-sun)
+		os=-sunos4.1.1
+		;;
+	*-be)
+		os=-beos
+		;;
+	*-haiku)
+		os=-haiku
+		;;
+	*-ibm)
+		os=-aix
+		;;
+    	*-knuth)
+		os=-mmixware
+		;;
+	*-wec)
+		os=-proelf
+		;;
+	*-winbond)
+		os=-proelf
+		;;
+	*-oki)
+		os=-proelf
+		;;
+	*-hp)
+		os=-hpux
+		;;
+	*-hitachi)
+		os=-hiux
+		;;
+	i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent)
+		os=-sysv
+		;;
+	*-cbm)
+		os=-amigaos
+		;;
+	*-dg)
+		os=-dgux
+		;;
+	*-dolphin)
+		os=-sysv3
+		;;
+	m68k-ccur)
+		os=-rtu
+		;;
+	m88k-omron*)
+		os=-luna
+		;;
+	*-next )
+		os=-nextstep
+		;;
+	*-sequent)
+		os=-ptx
+		;;
+	*-crds)
+		os=-unos
+		;;
+	*-ns)
+		os=-genix
+		;;
+	i370-*)
+		os=-mvs
+		;;
+	*-next)
+		os=-nextstep3
+		;;
+	*-gould)
+		os=-sysv
+		;;
+	*-highlevel)
+		os=-bsd
+		;;
+	*-encore)
+		os=-bsd
+		;;
+	*-sgi)
+		os=-irix
+		;;
+	*-siemens)
+		os=-sysv4
+		;;
+	*-masscomp)
+		os=-rtu
+		;;
+	f30[01]-fujitsu | f700-fujitsu)
+		os=-uxpv
+		;;
+	*-rom68k)
+		os=-coff
+		;;
+	*-*bug)
+		os=-coff
+		;;
+	*-apple)
+		os=-macos
+		;;
+	*-atari*)
+		os=-mint
+		;;
+	*)
+		os=-none
+		;;
+esac
+fi
+
+# Here we handle the case where we know the os, and the CPU type, but not the
+# manufacturer.  We pick the logical manufacturer.
+vendor=unknown
+case $basic_machine in
+	*-unknown)
+		case $os in
+			-riscix*)
+				vendor=acorn
+				;;
+			-sunos*)
+				vendor=sun
+				;;
+			-aix*)
+				vendor=ibm
+				;;
+			-beos*)
+				vendor=be
+				;;
+			-hpux*)
+				vendor=hp
+				;;
+			-mpeix*)
+				vendor=hp
+				;;
+			-hiux*)
+				vendor=hitachi
+				;;
+			-unos*)
+				vendor=crds
+				;;
+			-dgux*)
+				vendor=dg
+				;;
+			-luna*)
+				vendor=omron
+				;;
+			-genix*)
+				vendor=ns
+				;;
+			-mvs* | -opened*)
+				vendor=ibm
+				;;
+			-os400*)
+				vendor=ibm
+				;;
+			-ptx*)
+				vendor=sequent
+				;;
+			-tpf*)
+				vendor=ibm
+				;;
+			-vxsim* | -vxworks* | -windiss*)
+				vendor=wrs
+				;;
+			-aux*)
+				vendor=apple
+				;;
+			-hms*)
+				vendor=hitachi
+				;;
+			-mpw* | -macos*)
+				vendor=apple
+				;;
+			-*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*)
+				vendor=atari
+				;;
+			-vos*)
+				vendor=stratus
+				;;
+		esac
+		basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
+		;;
+esac
+
+echo $basic_machine$os
+exit
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "timestamp='"
+# time-stamp-format: "%:y-%02m-%02d"
+# time-stamp-end: "'"
+# End:

deps/sqlite3/configure.ac

+
+#-----------------------------------------------------------------------
+# Supports the following non-standard switches.
+#
+#   --enable-threadsafe
+#   --enable-readline
+#   --enable-dynamic-extensions
+#
+
+AC_PREREQ(2.61)
+AC_INIT(sqlite, 3.7.8, http://www.sqlite.org)
+AC_CONFIG_SRCDIR([sqlite3.c])
+
+# Use automake.
+AM_INIT_AUTOMAKE([foreign])
+
+AC_SYS_LARGEFILE
+
+# Check for required programs.
+AC_PROG_CC
+AC_PROG_RANLIB
+AC_PROG_LIBTOOL
+AC_PROG_MKDIR_P
+
+# Check for library functions that SQLite can optionally use.
+AC_CHECK_FUNCS([fdatasync usleep fullfsync localtime_r gmtime_r])
+AC_FUNC_STRERROR_R
+
+AC_CONFIG_FILES([Makefile sqlite3.pc])
+AC_SUBST(BUILD_CFLAGS)
+
+#-----------------------------------------------------------------------
+#   --enable-readline
+#
+AC_ARG_ENABLE(readline, [AS_HELP_STRING(
+  [--enable-readline], 
+  [use readline in shell tool (yes, no) [default=yes]])], 
+  [], [enable_readline=yes])
+if test x"$enable_readline" != xno ; then
+  sLIBS=$LIBS
+  LIBS=""
+  AC_SEARCH_LIBS(tgetent, curses ncurses ncursesw, [], [])
+  AC_SEARCH_LIBS(readline, readline, [], [enable_readline=no])
+  AC_CHECK_FUNCS(readline, [], [])
+  READLINE_LIBS=$LIBS
+  LIBS=$sLIBS
+fi
+AC_SUBST(READLINE_LIBS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+#   --enable-threadsafe
+#
+AC_ARG_ENABLE(threadsafe, [AS_HELP_STRING(
+  [--enable-threadsafe], [build a thread-safe library [default=yes]])], 
+  [], [enable_threadsafe=yes])
+THREADSAFE_FLAGS=-DSQLITE_THREADSAFE=0
+if test x"$enable_threadsafe" != "xno"; then
+  THREADSAFE_FLAGS="-D_REENTRANT=1 -DSQLITE_THREADSAFE=1"
+  AC_SEARCH_LIBS(pthread_create, pthread)
+fi
+AC_SUBST(THREADSAFE_FLAGS)
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+#   --enable-dynamic-extensions
+#
+AC_ARG_ENABLE(dynamic-extensions, [AS_HELP_STRING(
+  [--enable-dynamic-extensions], [support loadable extensions [default=yes]])], 
+  [], [enable_dynamic_extensions=yes])
+if test x"$enable_dynamic_extensions" != "xno"; then
+  AC_SEARCH_LIBS(dlopen, dl)
+else
+  DYNAMIC_EXTENSION_FLAGS=-DSQLITE_OMIT_LOAD_EXTENSION=1
+fi
+AC_MSG_CHECKING([for whether to support dynamic extensions])
+AC_MSG_RESULT($enable_dynamic_extensions)
+AC_SUBST(DYNAMIC_EXTENSION_FLAGS)
+#-----------------------------------------------------------------------
+
+AC_CHECK_FUNCS(posix_fallocate)
+
+#-----------------------------------------------------------------------
+# UPDATE: Maybe it's better if users just set CFLAGS before invoking
+# configure. This option doesn't really add much...
+#
+#   --enable-tempstore
+#
+# AC_ARG_ENABLE(tempstore, [AS_HELP_STRING(
+#   [--enable-tempstore], 
+#   [in-memory temporary tables (never, no, yes, always) [default=no]])], 
+#   [], [enable_tempstore=no])
+# AC_MSG_CHECKING([for whether or not to store temp tables in-memory])
+# case "$enable_tempstore" in
+#   never )  TEMP_STORE=0 ;;
+#   no )     TEMP_STORE=1 ;;
+#   always ) TEMP_STORE=3 ;;
+#   yes )    TEMP_STORE=3 ;;
+#   * )
+#     TEMP_STORE=1
+#     enable_tempstore=yes
+#   ;;
+# esac
+# AC_MSG_RESULT($enable_tempstore)
+# AC_SUBST(TEMP_STORE)
+#-----------------------------------------------------------------------
+
+AC_OUTPUT

deps/sqlite3/depcomp

+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2005-07-09.11
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> $depfile
+    echo >> $depfile
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> $depfile
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'`
+  tmpdepfile="$stripped.u"
+  if test "$libtool" = yes; then
+    "$@" -Wc,-M
+  else
+    "$@" -M
+  fi
+  stat=$?
+
+  if test -f "$tmpdepfile"; then :
+  else
+    stripped=`echo "$stripped" | sed 's,^.*/,,'`
+    tmpdepfile="$stripped.u"
+  fi
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+
+  if test -f "$tmpdepfile"; then
+    outname="$stripped.o"
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
+    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mecanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no
+  for arg in "$@"; do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix="`echo $object | sed 's/^.*\././'`"
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test $1 != '--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o,
+  # because we must use -o when running libtool.
+  "$@" || exit $?
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

deps/sqlite3/install-sh

+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2005-05-14.22
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+chmodcmd="$chmodprog 0755"
+chowncmd=
+chgrpcmd=
+stripcmd=
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=
+dst=
+dir_arg=
+dstarg=
+no_target_directory=
+
+usage="Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+-c         (ignored)
+-d         create directories instead of installing files.
+-g GROUP   $chgrpprog installed files to GROUP.
+-m MODE    $chmodprog installed files to MODE.
+-o USER    $chownprog installed files to USER.
+-s         $stripprog installed files.
+-t DIRECTORY  install into DIRECTORY.
+-T         report an error if DSTFILE is a directory.
+--help     display this help and exit.
+--version  display version info and exit.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
+"
+
+while test -n "$1"; do
+  case $1 in
+    -c) shift
+        continue;;
+
+    -d) dir_arg=true
+        shift
+        continue;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift
+        shift
+        continue;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) chmodcmd="$chmodprog $2"
+        shift
+        shift
+        continue;;
+
+    -o) chowncmd="$chownprog $2"
+        shift
+        shift
+        continue;;
+
+    -s) stripcmd=$stripprog
+        shift
+        continue;;
+
+    -t) dstarg=$2
+	shift
+	shift
+	continue;;
+
+    -T) no_target_directory=true
+	shift
+	continue;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    *)  # When -d is used, all remaining arguments are directories to create.
+	# When -t is used, the destination is already specified.
+	test -n "$dir_arg$dstarg" && break
+        # Otherwise, the last argument is the destination.  Remove it from $@.
+	for arg
+	do
+          if test -n "$dstarg"; then
+	    # $@ is not empty: it contains at least $arg.
+	    set fnord "$@" "$dstarg"
+	    shift # fnord
+	  fi
+	  shift # arg
+	  dstarg=$arg
+	done
+	break;;
+  esac
+done
+
+if test -z "$1"; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src ;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    src=
+
+    if test -d "$dst"; then
+      mkdircmd=:
+      chmodcmd=
+    else
+      mkdircmd=$mkdirprog
+    fi
+  else
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dstarg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dstarg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst ;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dstarg: Is a directory" >&2
+	exit 1
+      fi
+      dst=$dst/`basename "$src"`
+    fi
+  fi
+
+  # This sed command emulates the dirname command.
+  dstdir=`echo "$dst" | sed -e 's,/*$,,;s,[^/]*$,,;s,/*$,,;s,^$,.,'`
+
+  # Make sure that the destination directory exists.
+
+  # Skip lots of stat calls in the usual case.
+  if test ! -d "$dstdir"; then
+    defaultIFS='
+	 '
+    IFS="${IFS-$defaultIFS}"
+
+    oIFS=$IFS
+    # Some sh's can't handle IFS=/ for some reason.
+    IFS='%'
+    set x `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
+    shift
+    IFS=$oIFS
+
+    pathcomp=
+
+    while test $# -ne 0 ; do
+      pathcomp=$pathcomp$1
+      shift
+      if test ! -d "$pathcomp"; then
+        $mkdirprog "$pathcomp"
+	# mkdir can fail with a `File exist' error in case several
+	# install-sh are creating the directory concurrently.  This
+	# is OK.
+	test -d "$pathcomp" || exit
+      fi
+      pathcomp=$pathcomp/
+    done
+  fi
+
+  if test -n "$dir_arg"; then
+    $doit $mkdircmd "$dst" \
+      && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
+
+  else
+    dstfile=`basename "$dst"`
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+    trap '(exit $?); exit' 1 2 13 15
+
+    # Copy the file name to the temp name.
+    $doit $cpprog "$src" "$dsttmp" &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
+      && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
+      && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
+      && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
+
+    # Now rename the file to the real destination.
+    { $doit $mvcmd -f "$dsttmp" "$dstdir/$dstfile" 2>/dev/null \
+      || {
+	   # The rename failed, perhaps because mv can't rename something else
+	   # to itself, or perhaps because mv is so ancient that it does not
+	   # support -f.
+
+	   # Now remove or move aside any old file at destination location.
+	   # We try this two ways since rm can't unlink itself on some
+	   # systems and the destination file might be busy for other
+	   # reasons.  In this case, the final cleanup might fail but the new
+	   # file should still install successfully.
+	   {
+	     if test -f "$dstdir/$dstfile"; then
+	       $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
+	       || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
+	       || {
+		 echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
+		 (exit 1); exit 1
+	       }
+	     else
+	       :
+	     fi
+	   } &&
+
+	   # Now rename the file to the real destination.
+	   $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
+	 }
+    }
+  fi || { (exit 1); exit 1; }
+done
+
+# The final little trick to "correctly" pass the exit status to the exit trap.
+{
+  (exit 0); exit 0
+}
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

deps/sqlite3/missing

+#! /bin/sh
+# Common stub for a few missing GNU programs while installing.
+
+scriptversion=2005-06-08.21
+
+# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003, 2004, 2005
+#   Free Software Foundation, Inc.
+# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+# 02110-1301, USA.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+if test $# -eq 0; then
+  echo 1>&2 "Try \`$0 --help' for more information"
+  exit 1
+fi
+
+run=:
+
+# In the cases where this matters, `missing' is being run in the
+# srcdir already.
+if test -f configure.ac; then
+  configure_ac=configure.ac
+else
+  configure_ac=configure.in
+fi
+
+msg="missing on your system"
+
+case "$1" in
+--run)
+  # Try to run requested program, and just exit if it succeeds.
+  run=
+  shift
+  "$@" && exit 0
+  # Exit code 63 means version mismatch.  This often happens
+  # when the user try to use an ancient version of a tool on
+  # a file that requires a minimum version.  In this case we
+  # we should proceed has if the program had been absent, or
+  # if --run hadn't been passed.
+  if test $? = 63; then
+    run=:
+    msg="probably too old"
+  fi
+  ;;
+
+  -h|--h|--he|--hel|--help)
+    echo "\
+$0 [OPTION]... PROGRAM [ARGUMENT]...
+
+Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
+error status if there is no known handling for PROGRAM.
+
+Options:
+  -h, --help      display this help and exit
+  -v, --version   output version information and exit
+  --run           try to run the given command, and emulate it if it fails
+
+Supported PROGRAM values:
+  aclocal      touch file \`aclocal.m4'
+  autoconf     touch file \`configure'
+  autoheader   touch file \`config.h.in'
+  automake     touch all \`Makefile.in' files
+  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
+  flex         create \`lex.yy.c', if possible, from existing .c
+  help2man     touch the output file
+  lex          create \`lex.yy.c', if possible, from existing .c
+  makeinfo     touch the output file
+  tar          try tar, gnutar, gtar, then tar without non-portable flags
+  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
+
+Send bug reports to <bug-automake@gnu.org>."
+    exit $?
+    ;;
+
+  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
+    echo "missing $scriptversion (GNU Automake)"
+    exit $?
+    ;;
+
+  -*)
+    echo 1>&2 "$0: Unknown \`$1' option"
+    echo 1>&2 "Try \`$0 --help' for more information"
+    exit 1
+    ;;
+
+esac
+
+# Now exit if we have it, but it failed.  Also exit now if we
+# don't have it and --version was passed (most likely to detect
+# the program).
+case "$1" in
+  lex|yacc)
+    # Not GNU programs, they don't have --version.
+    ;;
+
+  tar)
+    if test -n "$run"; then
+       echo 1>&2 "ERROR: \`tar' requires --run"
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       exit 1
+    fi
+    ;;
+
+  *)
+    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
+       # We have it, but it failed.
+       exit 1
+    elif test "x$2" = "x--version" || test "x$2" = "x--help"; then
+       # Could not run --version or --help.  This is probably someone
+       # running `$TOOL --version' or `$TOOL --help' to check whether
+       # $TOOL exists and not knowing $TOOL uses missing.
+       exit 1
+    fi
+    ;;
+esac
+
+# If it does not exist, or fails to run (possibly an outdated version),
+# try to emulate it.
+case "$1" in
+  aclocal*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
+         to install the \`Automake' and \`Perl' packages.  Grab them from
+         any GNU archive site."
+    touch aclocal.m4
+    ;;
+
+  autoconf)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`${configure_ac}'.  You might want to install the
+         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
+         archive site."
+    touch configure
+    ;;
+
+  autoheader)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
+         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
+         from any GNU archive site."
+    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
+    test -z "$files" && files="config.h"
+    touch_files=
+    for f in $files; do
+      case "$f" in
+      *:*) touch_files="$touch_files "`echo "$f" |
+				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
+      *) touch_files="$touch_files $f.in";;
+      esac
+    done
+    touch $touch_files
+    ;;
+
+  automake*)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
+         You might want to install the \`Automake' and \`Perl' packages.
+         Grab them from any GNU archive site."
+    find . -type f -name Makefile.am -print |
+	   sed 's/\.am$/.in/' |
+	   while read f; do touch "$f"; done
+    ;;
+
+  autom4te)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, but is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.
+         You can get \`$1' as part of \`Autoconf' from any GNU
+         archive site."
+
+    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
+    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
+    if test -f "$file"; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo "#! /bin/sh"
+	echo "# Created by GNU Automake missing as a replacement of"
+	echo "#  $ $@"
+	echo "exit 0"
+	chmod +x $file
+	exit 1
+    fi
+    ;;
+
+  bison|yacc)
+    echo 1>&2 "\
+WARNING: \`$1' $msg.  You should only need it if
+         you modified a \`.y' file.  You may need the \`Bison' package
+         in order for those modifications to take effect.  You can get
+         \`Bison' from any GNU archive site."
+    rm -f y.tab.c y.tab.h
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.y)
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.c
+	    fi
+	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" y.tab.h
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f y.tab.h ]; then
+	echo >y.tab.h
+    fi
+    if [ ! -f y.tab.c ]; then
+	echo 'main() { return 0; }' >y.tab.c
+    fi
+    ;;
+
+  lex|flex)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.l' file.  You may need the \`Flex' package
+         in order for those modifications to take effect.  You can get
+         \`Flex' from any GNU archive site."
+    rm -f lex.yy.c
+    if [ $# -ne 1 ]; then
+        eval LASTARG="\${$#}"
+	case "$LASTARG" in
+	*.l)
+	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
+	    if [ -f "$SRCFILE" ]; then
+	         cp "$SRCFILE" lex.yy.c
+	    fi
+	  ;;
+	esac
+    fi
+    if [ ! -f lex.yy.c ]; then
+	echo 'main() { return 0; }' >lex.yy.c
+    fi
+    ;;
+
+  help2man)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+	 you modified a dependency of a manual page.  You may need the
+	 \`Help2man' package in order for those modifications to take
+	 effect.  You can get \`Help2man' from any GNU archive site."
+
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
+    fi
+    if [ -f "$file" ]; then
+	touch $file
+    else
+	test -z "$file" || exec >$file
+	echo ".ab help2man is required to generate this page"
+	exit 1
+    fi
+    ;;
+
+  makeinfo)
+    echo 1>&2 "\
+WARNING: \`$1' is $msg.  You should only need it if
+         you modified a \`.texi' or \`.texinfo' file, or any other file
+         indirectly affecting the aspect of the manual.  The spurious
+         call might also be the consequence of using a buggy \`make' (AIX,
+         DU, IRIX).  You might want to install the \`Texinfo' package or
+         the \`GNU make' package.  Grab either from any GNU archive site."
+    # The file to touch is that specified with -o ...
+    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
+    if test -z "$file"; then
+      # ... or it is the one specified with @setfilename ...
+      infile=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
+      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $infile`
+      # ... or it is derived from the source name (dir/f.texi becomes f.info)
+      test -z "$file" && file=`echo "$infile" | sed 's,.*/,,;s,.[^.]*$,,'`.info
+    fi
+    # If the file does not exist, the user really needs makeinfo;
+    # let's fail without touching anything.
+    test -f $file || exit 1
+    touch $file
+    ;;
+
+  tar)
+    shift
+
+    # We have already tried tar in the generic part.
+    # Look for gnutar/gtar before invocation to avoid ugly error
+    # messages.
+    if (gnutar --version > /dev/null 2>&1); then
+       gnutar "$@" && exit 0
+    fi
+    if (gtar --version > /dev/null 2>&1); then
+       gtar "$@" && exit 0
+    fi
+    firstarg="$1"
+    if shift; then
+	case "$firstarg" in
+	*o*)
+	    firstarg=`echo "$firstarg" | sed s/o//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+	case "$firstarg" in
+	*h*)
+	    firstarg=`echo "$firstarg" | sed s/h//`
+	    tar "$firstarg" "$@" && exit 0
+	    ;;
+	esac
+    fi
+
+    echo 1>&2 "\
+WARNING: I can't seem to be able to run \`tar' with the given arguments.
+         You may want to install GNU tar or Free paxutils, or check the
+         command line arguments."
+    exit 1
+    ;;
+
+  *)
+    echo 1>&2 "\
+WARNING: \`$1' is needed, and is $msg.
+         You might have modified some files without having the
+         proper tools for further handling them.  Check the \`README' file,
+         it often tells you about the needed prerequisites for installing
+         this package.  You may also peek at any GNU archive site, in case
+         some other package would contain this missing \`$1' program."
+    exit 1
+    ;;
+esac
+
+exit 0
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-end: "$"
+# End:

deps/sqlite3/shell.c

+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+*************************************************************************
+** This file contains code to implement the "sqlite" command line
+** utility for accessing SQLite databases.
+*/
+#if (defined(_WIN32) || defined(WIN32)) && !defined(_CRT_SECURE_NO_WARNINGS)
+/* This needs to come before any includes for MSVC compiler */
+#define _CRT_SECURE_NO_WARNINGS
+#endif
+
+#include <stdlib.h>
+#include <string.h>
+#include <stdio.h>
+#include <assert.h>
+#include "sqlite3.h"
+#include <ctype.h>
+#include <stdarg.h>
+
+#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__)
+# include <signal.h>
+# if !defined(__RTP__) && !defined(_WRS_KERNEL)
+#  include <pwd.h>
+# endif
+# include <unistd.h>
+# include <sys/types.h>
+#endif
+
+#ifdef __OS2__
+# include <unistd.h>
+#endif
+
+#ifdef HAVE_EDITLINE
+# include <editline/editline.h>
+#endif
+#if defined(HAVE_READLINE) && HAVE_READLINE==1
+# include <readline/readline.h>
+# include <readline/history.h>
+#endif
+#if !defined(HAVE_EDITLINE) && (!defined(HAVE_READLINE) || HAVE_READLINE!=1)
+# define readline(p) local_getline(p,stdin)
+# define add_history(X)
+# define read_history(X)
+# define write_history(X)
+# define stifle_history(X)
+#endif
+
+#if defined(_WIN32) || defined(WIN32)
+# include <io.h>
+#define isatty(h) _isatty(h)
+#define access(f,m) _access((f),(m))
+#else
+/* Make sure isatty() has a prototype.
+*/
+extern int isatty();
+#endif
+
+#if defined(_WIN32_WCE)
+/* Windows CE (arm-wince-mingw32ce-gcc) does not provide isatty()
+ * thus we always assume that we have a console. That can be
+ * overridden with the -batch command line option.
+ */
+#define isatty(x) 1
+#endif
+
+/* True if the timer is enabled */
+static int enableTimer = 0;
+
+#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__) && !defined(__RTP__) && !defined(_WRS_KERNEL)
+#include <sys/time.h>
+#include <sys/resource.h>
+
+/* Saved resource information for the beginning of an operation */
+static struct rusage sBegin;
+
+/*
+** Begin timing an operation
+*/
+static void beginTimer(void){
+  if( enableTimer ){
+    getrusage(RUSAGE_SELF, &sBegin);
+  }
+}
+
+/* Return the difference of two time_structs in seconds */
+static double timeDiff(struct timeval *pStart, struct timeval *pEnd){
+  return (pEnd->tv_usec - pStart->tv_usec)*0.000001 + 
+         (double)(pEnd->tv_sec - pStart->tv_sec);
+}
+
+/*
+** Print the timing results.
+*/
+static void endTimer(void){
+  if( enableTimer ){
+    struct rusage sEnd;
+    getrusage(RUSAGE_SELF, &sEnd);
+    printf("CPU Time: user %f sys %f\n",
+       timeDiff(&sBegin.ru_utime, &sEnd.ru_utime),
+       timeDiff(&sBegin.ru_stime, &sEnd.ru_stime));
+  }
+}
+
+#define BEGIN_TIMER beginTimer()
+#define END_TIMER endTimer()
+#define HAS_TIMER 1
+
+#elif (defined(_WIN32) || defined(WIN32))
+
+#include <windows.h>
+
+/* Saved resource information for the beginning of an operation */
+static HANDLE hProcess;
+static FILETIME ftKernelBegin;
+static FILETIME ftUserBegin;
+typedef BOOL (WINAPI *GETPROCTIMES)(HANDLE, LPFILETIME, LPFILETIME, LPFILETIME, LPFILETIME);
+static GETPROCTIMES getProcessTimesAddr = NULL;
+
+/*
+** Check to see if we have timer support.  Return 1 if necessary
+** support found (or found previously).
+*/
+static int hasTimer(void){
+  if( getProcessTimesAddr ){
+    return 1;
+  } else {
+    /* GetProcessTimes() isn't supported in WIN95 and some other Windows versions.
+    ** See if the version we are running on has it, and if it does, save off
+    ** a pointer to it and the current process handle.
+    */
+    hProcess = GetCurrentProcess();
+    if( hProcess ){
+      HINSTANCE hinstLib = LoadLibrary(TEXT("Kernel32.dll"));
+      if( NULL != hinstLib ){
+        getProcessTimesAddr = (GETPROCTIMES) GetProcAddress(hinstLib, "GetProcessTimes");
+        if( NULL != getProcessTimesAddr ){
+          return 1;
+        }
+        FreeLibrary(hinstLib); 
+      }
+    }
+  }
+  return 0;
+}
+
+/*
+** Begin timing an operation
+*/
+static void beginTimer(void){
+  if( enableTimer && getProcessTimesAddr ){
+    FILETIME ftCreation, ftExit;
+    getProcessTimesAddr(hProcess, &ftCreation, &ftExit, &ftKernelBegin, &ftUserBegin);
+  }
+}
+
+/* Return the difference of two FILETIME structs in seconds */
+static double timeDiff(FILETIME *pStart, FILETIME *pEnd){
+  sqlite_int64 i64Start = *((sqlite_int64 *) pStart);
+  sqlite_int64 i64End = *((sqlite_int64 *) pEnd);
+  return (double) ((i64End - i64Start) / 10000000.0);
+}
+
+/*
+** Print the timing results.
+*/
+static void endTimer(void){
+  if( enableTimer && getProcessTimesAddr){
+    FILETIME ftCreation, ftExit, ftKernelEnd, ftUserEnd;
+    getProcessTimesAddr(hProcess, &ftCreation, &ftExit, &ftKernelEnd, &ftUserEnd);
+    printf("CPU Time: user %f sys %f\n",
+       timeDiff(&ftUserBegin, &ftUserEnd),
+       timeDiff(&ftKernelBegin, &ftKernelEnd));
+  }
+}
+
+#define BEGIN_TIMER beginTimer()
+#define END_TIMER endTimer()
+#define HAS_TIMER hasTimer()
+
+#else
+#define BEGIN_TIMER 
+#define END_TIMER
+#define HAS_TIMER 0
+#endif
+
+/*
+** Used to prevent warnings about unused parameters
+*/
+#define UNUSED_PARAMETER(x) (void)(x)
+
+/*
+** If the following flag is set, then command execution stops
+** at an error if we are not interactive.
+*/
+static int bail_on_error = 0;
+
+/*
+** Threat stdin as an interactive input if the following variable
+** is true.  Otherwise, assume stdin is connected to a file or pipe.
+*/
+static int stdin_is_interactive = 1;
+
+/*
+** The following is the open SQLite database.  We make a pointer
+** to this database a static variable so that it can be accessed
+** by the SIGINT handler to interrupt database processing.
+*/
+static sqlite3 *db = 0;
+
+/*
+** True if an interrupt (Control-C) has been received.
+*/
+static volatile int seenInterrupt = 0;
+
+/*
+** This is the name of our program. It is set in main(), used
+** in a number of other places, mostly for error messages.
+*/
+static char *Argv0;
+
+/*
+** Prompt strings. Initialized in main. Settable with
+**   .prompt main continue
+*/
+static char mainPrompt[20];     /* First line prompt. default: "sqlite> "*/
+static char continuePrompt[20]; /* Continuation prompt. default: "   ...> " */
+
+/*
+** Write I/O traces to the following stream.
+*/
+#ifdef SQLITE_ENABLE_IOTRACE
+static FILE *iotrace = 0;
+#endif
+
+/*
+** This routine works like printf in that its first argument is a
+** format string and subsequent arguments are values to be substituted
+** in place of % fields.  The result of formatting this string
+** is written to iotrace.
+*/
+#ifdef SQLITE_ENABLE_IOTRACE
+static void iotracePrintf(const char *zFormat, ...){
+  va_list ap;
+  char *z;
+  if( iotrace==0 ) return;
+  va_start(ap, zFormat);
+  z = sqlite3_vmprintf(zFormat, ap);
+  va_end(ap);
+  fprintf(iotrace, "%s", z);
+  sqlite3_free(z);
+}
+#endif
+
+
+/*
+** Determines if a string is a number of not.
+*/
+static int isNumber(const char *z, int *realnum){
+  if( *z=='-' || *z=='+' ) z++;
+  if( !isdigit(*z) ){
+    return 0;
+  }
+  z++;
+  if( realnum ) *realnum = 0;
+  while( isdigit(*z) ){ z++; }
+  if( *z=='.' ){
+    z++;
+    if( !isdigit(*z) ) return 0;
+    while( isdigit(*z) ){ z++; }
+    if( realnum ) *realnum = 1;
+  }
+  if( *z=='e' || *z=='E' ){
+    z++;
+    if( *z=='+' || *z=='-' ) z++;
+    if( !isdigit(*z) ) return 0;
+    while( isdigit(*z) ){ z++; }
+    if( realnum ) *realnum = 1;
+  }
+  return *z==0;
+}
+
+/*
+** A global char* and an SQL function to access its current value 
+** from within an SQL statement. This program used to use the 
+** sqlite_exec_printf() API to substitue a string into an SQL statement.
+** The correct way to do this with sqlite3 is to use the bind API, but
+** since the shell is built around the callback paradigm it would be a lot
+** of work. Instead just use this hack, which is quite harmless.
+*/
+static const char *zShellStatic = 0;
+static void shellstaticFunc(
+  sqlite3_context *context,
+  int argc,
+  sqlite3_value **argv
+){
+  assert( 0==argc );
+  assert( zShellStatic );
+  UNUSED_PARAMETER(argc);
+  UNUSED_PARAMETER(argv);
+  sqlite3_result_text(context, zShellStatic, -1, SQLITE_STATIC);
+}
+
+
+/*
+** This routine reads a line of text from FILE in, stores
+** the text in memory obtained from malloc() and returns a pointer
+** to the text.  NULL is returned at end of file, or if malloc()
+** fails.
+**
+** The interface is like "readline" but no command-line editing
+** is done.
+*/
+static char *local_getline(char *zPrompt, FILE *in){
+  char *zLine;
+  int nLine;
+  int n;
+  int eol;
+
+  if( zPrompt && *zPrompt ){
+    printf("%s",zPrompt);
+    fflush(stdout);
+  }
+  nLine = 100;
+  zLine = malloc( nLine );
+  if( zLine==0 ) return 0;
+  n = 0;
+  eol = 0;
+  while( !eol ){
+    if( n+100>nLine ){
+      nLine = nLine*2 + 100;
+      zLine = realloc(zLine, nLine);
+      if( zLine==0 ) return 0;
+    }
+    if( fgets(&zLine[n], nLine - n, in)==0 ){
+      if( n==0 ){
+        free(zLine);
+        return 0;
+      }
+      zLine[n] = 0;
+      eol = 1;
+      break;
+    }
+    while( zLine[n] ){ n++; }
+    if( n>0 && zLine[n-1]=='\n' ){
+      n--;
+      if( n>0 && zLine[n-1]=='\r' ) n--;
+      zLine[n] = 0;
+      eol = 1;
+    }
+  }
+  zLine = realloc( zLine, n+1 );
+  return zLine;
+}
+
+/*
+** Retrieve a single line of input text.
+**
+** zPrior is a string of prior text retrieved.  If not the empty
+** string, then issue a continuation prompt.
+*/
+static char *one_input_line(const char *zPrior, FILE *in){
+  char *zPrompt;
+  char *zResult;
+  if( in!=0 ){
+    return local_getline(0, in);
+  }
+  if( zPrior && zPrior[0] ){
+    zPrompt = continuePrompt;
+  }else{
+    zPrompt = mainPrompt;
+  }
+  zResult = readline(zPrompt);
+#if defined(HAVE_READLINE) && HAVE_READLINE==1
+  if( zResult && *zResult ) add_history(zResult);
+#endif
+  return zResult;
+}
+
+struct previous_mode_data {
+  int valid;        /* Is there legit data in here? */
+  int mode;
+  int showHeader;
+  int colWidth[100];
+};
+
+/*
+** An pointer to an instance of this structure is passed from
+** the main program to the callback.  This is used to communicate
+** state and mode information.
+*/
+struct callback_data {
+  sqlite3 *db;           /* The database */
+  int echoOn;            /* True to echo input commands */
+  int statsOn;           /* True to display memory stats before each finalize */
+  int cnt;               /* Number of records displayed so far */
+  FILE *out;             /* Write results here */
+  int mode;              /* An output mode setting */
+  int writableSchema;    /* True if PRAGMA writable_schema=ON */
+  int showHeader;        /* True to show column names in List or Column mode */
+  char *zDestTable;      /* Name of destination table when MODE_Insert */
+  char separator[20];    /* Separator character for MODE_List */
+  int colWidth[100];     /* Requested width of each column when in column mode*/
+  int actualWidth[100];  /* Actual width of each column */
+  char nullvalue[20];    /* The text to print when a NULL comes back from
+                         ** the database */
+  struct previous_mode_data explainPrev;
+                         /* Holds the mode information just before
+                         ** .explain ON */
+  char outfile[FILENAME_MAX]; /* Filename for *out */
+  const char *zDbFilename;    /* name of the database file */
+  const char *zVfs;           /* Name of VFS to use */
+  sqlite3_stmt *pStmt;   /* Current statement if any. */
+  FILE *pLog;            /* Write log output here */
+};
+
+/*
+** These are the allowed modes.
+*/
+#define MODE_Line     0  /* One column per line.  Blank line between records */
+#define MODE_Column   1  /* One record per line in neat columns */
+#define MODE_List     2  /* One record per line with a separator */
+#define MODE_Semi     3  /* Same as MODE_List but append ";" to each line */
+#define MODE_Html     4  /* Generate an XHTML table */
+#define MODE_Insert   5  /* Generate SQL "insert" statements */
+#define MODE_Tcl      6  /* Generate ANSI-C or TCL quoted elements */
+#define MODE_Csv      7  /* Quote strings, numbers are plain */
+#define MODE_Explain  8  /* Like MODE_Column, but do not truncate data */
+
+static const char *modeDescr[] = {
+  "line",
+  "column",
+  "list",
+  "semi",
+  "html",
+  "insert",
+  "tcl",
+  "csv",
+  "explain",
+};
+
+/*
+** Number of elements in an array
+*/
+#define ArraySize(X)  (int)(sizeof(X)/sizeof(X[0]))
+
+/*
+** Compute a string length that is limited to what can be stored in
+** lower 30 bits of a 32-bit signed integer.
+*/
+static int strlen30(const char *z){
+  const char *z2 = z;
+  while( *z2 ){ z2++; }
+  return 0x3fffffff & (int)(z2 - z);
+}
+
+/*
+** A callback for the sqlite3_log() interface.
+*/
+static void shellLog(void *pArg, int iErrCode, const char *zMsg){
+  struct callback_data *p = (struct callback_data*)pArg;
+  if( p->pLog==0 ) return;
+  fprintf(p->pLog, "(%d) %s\n", iErrCode, zMsg);
+  fflush(p->pLog);
+}
+
+/*
+** Output the given string as a hex-encoded blob (eg. X'1234' )
+*/
+static void output_hex_blob(FILE *out, const void *pBlob, int nBlob){
+  int i;
+  char *zBlob = (char *)pBlob;
+  fprintf(out,"X'");
+  for(i=0; i<nBlob; i++){ fprintf(out,"%02x",zBlob[i]); }
+  fprintf(out,"'");
+}
+
+/*
+** Output the given string as a quoted string using SQL quoting conventions.
+*/
+static void output_quoted_string(FILE *out, const char *z){
+  int i;
+  int nSingle = 0;
+  for(i=0; z[i]; i++){
+    if( z[i]=='\'' ) nSingle++;
+  }
+  if( nSingle==0 ){
+    fprintf(out,"'%s'",z);
+  }else{
+    fprintf(out,"'");
+    while( *z ){
+      for(i=0; z[i] && z[i]!='\''; i++){}
+      if( i==0 ){
+        fprintf(out,"''");
+        z++;
+      }else if( z[i]=='\'' ){
+        fprintf(out,"%.*s''",i,z);
+        z += i+1;
+      }else{
+        fprintf(out,"%s",z);
+        break;
+      }
+    }
+    fprintf(out,"'");
+  }
+}
+
+/*
+** Output the given string as a quoted according to C or TCL quoting rules.
+*/
+static void output_c_string(FILE *out, const char *z){
+  unsigned int c;
+  fputc('"', out);
+  while( (c = *(z++))!=0 ){
+    if( c=='\\' ){
+      fputc(c, out);
+      fputc(c, out);
+    }else if( c=='\t' ){
+      fputc('\\', out);
+      fputc('t', out);
+    }else if( c=='\n' ){
+      fputc('\\', out);
+      fputc('n', out);
+    }else if( c=='\r' ){
+      fputc('\\', out);
+      fputc('r', out);
+    }else if( !isprint(c) ){
+      fprintf(out, "\\%03o", c&0xff);
+    }else{
+      fputc(c, out);
+    }
+  }
+  fputc('"', out);
+}
+
+/*
+** Output the given string with characters that are special to
+** HTML escaped.
+*/
+static void output_html_string(FILE *out, const char *z){
+  int i;
+  while( *z ){
+    for(i=0;   z[i] 
+            && z[i]!='<' 
+            && z[i]!='&' 
+            && z[i]!='>' 
+            && z[i]!='\"' 
+            && z[i]!='\'';
+        i++){}
+    if( i>0 ){
+      fprintf(out,"%.*s",i,z);
+    }
+    if( z[i]=='<' ){
+      fprintf(out,"&lt;");
+    }else if( z[i]=='&' ){
+      fprintf(out,"&amp;");
+    }else if( z[i]=='>' ){
+      fprintf(out,"&gt;");
+    }else if( z[i]=='\"' ){
+      fprintf(out,"&quot;");
+    }else if( z[i]=='\'' ){
+      fprintf(out,"&#39;");
+    }else{
+      break;
+    }
+    z += i + 1;
+  }
+}
+
+/*
+** If a field contains any character identified by a 1 in the following
+** array, then the string must be quoted for CSV.
+*/
+static const char needCsvQuote[] = {
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 0, 1, 0, 0, 0, 0, 1,   0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 0, 
+  0, 0, 0, 0, 0, 0, 0, 0,   0, 0, 0, 0, 0, 0, 0, 1, 
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+  1, 1, 1, 1, 1, 1, 1, 1,   1, 1, 1, 1, 1, 1, 1, 1,   
+};
+
+/*
+** Output a single term of CSV.  Actually, p->separator is used for
+** the separator, which may or may not be a comma.  p->nullvalue is
+** the null value.  Strings are quoted using ANSI-C rules.  Numbers
+** appear outside of quotes.
+*/
+static void output_csv(struct callback_data *p, const char *z, int bSep){
+  FILE *out = p->out;
+  if( z==0 ){
+    fprintf(out,"%s",p->nullvalue);
+  }else{
+    int i;
+    int nSep = strlen30(p->separator);
+    for(i=0; z[i]; i++){
+      if( needCsvQuote[((unsigned char*)z)[i]] 
+         || (z[i]==p->separator[0] && 
+             (nSep==1 || memcmp(z, p->separator, nSep)==0)) ){
+        i = 0;
+        break;
+      }
+    }
+    if( i==0 ){
+      putc('"', out);
+      for(i=0; z[i]; i++){
+        if( z[i]=='"' ) putc('"', out);
+        putc(z[i], out);
+      }
+      putc('"', out);
+    }else{
+      fprintf(out, "%s", z);
+    }
+  }
+  if( bSep ){
+    fprintf(p->out, "%s", p->separator);
+  }
+}
+
+#ifdef SIGINT
+/*
+** This routine runs when the user presses Ctrl-C
+*/
+static void interrupt_handler(int NotUsed){
+  UNUSED_PARAMETER(NotUsed);
+  seenInterrupt = 1;
+  if( db ) sqlite3_interrupt(db);
+}
+#endif
+
+/*
+** This is the callback routine that the shell
+** invokes for each row of a query result.
+*/
+static int shell_callback(void *pArg, int nArg, char **azArg, char **azCol, int *aiType){
+  int i;
+  struct callback_data *p = (struct callback_data*)pArg;
+
+  switch( p->mode ){
+    case MODE_Line: {
+      int w = 5;
+      if( azArg==0 ) break;
+      for(i=0; i<nArg; i++){
+        int len = strlen30(azCol[i] ? azCol[i] : "");
+        if( len>w ) w = len;
+      }
+      if( p->cnt++>0 ) fprintf(p->out,"\n");
+      for(i=0; i<nArg; i++){
+        fprintf(p->out,"%*s = %s\n", w, azCol[i],
+                azArg[i] ? azArg[i] : p->nullvalue);
+      }
+      break;
+    }
+    case MODE_Explain:
+    case MODE_Column: {
+      if( p->cnt++==0 ){
+        for(i=0; i<nArg; i++){
+          int w, n;
+          if( i<ArraySize(p->colWidth) ){
+            w = p->colWidth[i];
+          }else{
+            w = 0;
+          }
+          if( w<=0 ){
+            w = strlen30(azCol[i] ? azCol[i] : "");
+            if( w<10 ) w = 10;
+            n = strlen30(azArg && azArg[i] ? azArg[i] : p->nullvalue);
+            if( w<n ) w = n;
+          }
+          if( i<ArraySize(p->actualWidth) ){
+            p->actualWidth[i] = w;
+          }
+          if( p->showHeader ){
+            fprintf(p->out,"%-*.*s%s",w,w,azCol[i], i==nArg-1 ? "\n": "  ");
+          }
+        }
+        if( p->showHeader ){
+          for(i=0; i<nArg; i++){
+            int w;
+            if( i<ArraySize(p->actualWidth) ){
+               w = p->actualWidth[i];
+            }else{
+               w = 10;
+            }
+            fprintf(p->out,"%-*.*s%s",w,w,"-----------------------------------"
+                   "----------------------------------------------------------",
+                    i==nArg-1 ? "\n": "  ");
+          }
+        }
+      }
+      if( azArg==0 ) break;
+      for(i=0; i<nArg; i++){
+        int w;
+        if( i<ArraySize(p->actualWidth) ){
+           w = p->actualWidth[i];
+        }else{
+           w = 10;
+        }
+        if( p->mode==MODE_Explain && azArg[i] && 
+           strlen30(azArg[i])>w ){
+          w = strlen30(azArg[i]);
+        }
+        fprintf(p->out,"%-*.*s%s",w,w,
+            azArg[i] ? azArg[i] : p->nullvalue, i==nArg-1 ? "\n": "  ");
+      }
+      break;
+    }
+    case MODE_Semi:
+    case MODE_List: {
+      if( p->cnt++==0 && p->showHeader ){
+        for(i=0; i<nArg; i++){
+          fprintf(p->out,"%s%s",azCol[i], i==nArg-1 ? "\n" : p->separator);
+        }
+      }
+      if( azArg==0 ) break;
+      for(i=0; i<nArg; i++){
+        char *z = azArg[i];
+        if( z==0 ) z = p->nullvalue;
+        fprintf(p->out, "%s", z);
+        if( i<nArg-1 ){
+          fprintf(p->out, "%s", p->separator);
+        }else if( p->mode==MODE_Semi ){
+          fprintf(p->out, ";\n");
+        }else{
+          fprintf(p->out, "\n");
+        }
+      }
+      break;
+    }
+    case MODE_Html: {
+      if( p->cnt++==0 && p->showHeader ){
+        fprintf(p->out,"<TR>");
+        for(i=0; i<nArg; i++){
+          fprintf(p->out,"<TH>");
+          output_html_string(p->out, azCol[i]);
+          fprintf(p->out,"</TH>\n");
+        }
+        fprintf(p->out,"</TR>\n");
+      }
+      if( azArg==0 ) break;
+      fprintf(p->out,"<TR>");
+      for(i=0; i<nArg; i++){
+        fprintf(p->out,"<TD>");
+        output_html_string(p->out, azArg[i] ? azArg[i] : p->nullvalue);
+        fprintf(p->out,"</TD>\n");
+      }
+      fprintf(p->out,"</TR>\n");
+      break;
+    }
+    case MODE_Tcl: {
+      if( p->cnt++==0 && p->showHeader ){
+        for(i=0; i<nArg; i++){
+          output_c_string(p->out,azCol[i] ? azCol[i] : "");
+          fprintf(p->out, "%s", p->separator);
+        }
+        fprintf(p->out,"\n");
+      }
+      if( azArg==0 ) break;
+      for(i=0; i<nArg; i++){
+        output_c_string(p->out, azArg[i] ? azArg[i] : p->nullvalue);
+        fprintf(p->out, "%s", p->separator);
+      }
+      fprintf(p->out,"\n");
+      break;
+    }
+    case MODE_Csv: {
+      if( p->cnt++==0 && p->showHeader ){
+        for(i=0; i<nArg; i++){
+          output_csv(p, azCol[i] ? azCol[i] : "", i<nArg-1);
+        }
+        fprintf(p->out,"\n");
+      }
+      if( azArg==0 ) break;
+      for(i=0; i<nArg; i++){
+        output_csv(p, azArg[i], i<nArg-1);
+      }
+      fprintf(p->out,"\n");
+      break;
+    }
+    case MODE_Insert: {
+      p->cnt++;
+      if( azArg==0 ) break;
+      fprintf(p->out,"INSERT INTO %s VALUES(",p->zDestTable);
+      for(i=0; i<nArg; i++){
+        char *zSep = i>0 ? ",": "";
+        if( (azArg[i]==0) || (aiType && aiType[i]==SQLITE_NULL) ){
+          fprintf(p->out,"%sNULL",zSep);
+        }else if( aiType && aiType[i]==SQLITE_TEXT ){
+          if( zSep[0] ) fprintf(p->out,"%s",zSep);
+          output_quoted_string(p->out, azArg[i]);
+        }else if( aiType && (aiType[i]==SQLITE_INTEGER || aiType[i]==SQLITE_FLOAT) ){
+          fprintf(p->out,"%s%s",zSep, azArg[i]);
+        }else if( aiType && aiType[i]==SQLITE_BLOB && p->pStmt ){
+          const void *pBlob = sqlite3_column_blob(p->pStmt, i);
+          int nBlob = sqlite3_column_bytes(p->pStmt, i);
+          if( zSep[0] ) fprintf(p->out,"%s",zSep);
+          output_hex_blob(p->out, pBlob, nBlob);
+        }else if( isNumber(azArg[i], 0) ){
+          fprintf(p->out,"%s%s",zSep, azArg[i]);
+        }else{
+          if( zSep[0] ) fprintf(p->out,"%s",zSep);
+          output_quoted_string(p->out, azArg[i]);
+        }
+      }
+      fprintf(p->out,");\n");
+      break;
+    }
+  }
+  return 0;
+}
+
+/*
+** This is the callback routine that the SQLite library
+** invokes for each row of a query result.
+*/
+static int callback(void *pArg, int nArg, char **azArg, char **azCol){
+  /* since we don't have type info, call the shell_callback with a NULL value */
+  return shell_callback(pArg, nArg, azArg, azCol, NULL);
+}
+
+/*
+** Set the destination table field of the callback_data structure to
+** the name of the table given.  Escape any quote characters in the
+** table name.
+*/
+static void set_table_name(struct callback_data *p, const char *zName){
+  int i, n;
+  int needQuote;
+  char *z;
+
+  if( p->zDestTable ){
+    free(p->zDestTable);
+    p->zDestTable = 0;
+  }
+  if( zName==0 ) return;
+  needQuote = !isalpha((unsigned char)*zName) && *zName!='_';
+  for(i=n=0; zName[i]; i++, n++){
+    if( !isalnum((unsigned char)zName[i]) && zName[i]!='_' ){
+      needQuote = 1;
+      if( zName[i]=='\'' ) n++;
+    }
+  }
+  if( needQuote ) n += 2;
+  z = p->zDestTable = malloc( n+1 );
+  if( z==0 ){
+    fprintf(stderr,"Error: out of memory\n");
+    exit(1);
+  }
+  n = 0;
+  if( needQuote ) z[n++] = '\'';
+  for(i=0; zName[i]; i++){
+    z[n++] = zName[i];
+    if( zName[i]=='\'' ) z[n++] = '\'';
+  }
+  if( needQuote ) z[n++] = '\'';
+  z[n] = 0;
+}
+
+/* zIn is either a pointer to a NULL-terminated string in memory obtained
+** from malloc(), or a NULL pointer. The string pointed to by zAppend is
+** added to zIn, and the result returned in memory obtained from malloc().
+** zIn, if it was not NULL, is freed.
+**
+** If the third argument, quote, is not '\0', then it is used as a 
+** quote character for zAppend.
+*/
+static char *appendText(char *zIn, char const *zAppend, char quote){
+  int len;
+  int i;
+  int nAppend = strlen30(zAppend);
+  int nIn = (zIn?strlen30(zIn):0);
+
+  len = nAppend+nIn+1;
+  if( quote ){
+    len += 2;
+    for(i=0; i<nAppend; i++){
+      if( zAppend[i]==quote ) len++;
+    }
+  }
+
+  zIn = (char *)realloc(zIn, len);
+  if( !zIn ){
+    return 0;
+  }
+
+  if( quote ){
+    char *zCsr = &zIn[nIn];
+    *zCsr++ = quote;
+    for(i=0; i<nAppend; i++){
+      *zCsr++ = zAppend[i];
+      if( zAppend[i]==quote ) *zCsr++ = quote;
+    }
+    *zCsr++ = quote;
+    *zCsr++ = '\0';
+    assert( (zCsr-zIn)==len );
+  }else{
+    memcpy(&zIn[nIn], zAppend, nAppend);
+    zIn[len-1] = '\0';
+  }
+
+  return zIn;
+}
+
+
+/*
+** Execute a query statement that has a single result column.  Print
+** that result column on a line by itself with a semicolon terminator.
+**
+** This is used, for example, to show the schema of the database by
+** querying the SQLITE_MASTER table.
+*/
+static int run_table_dump_query(
+  FILE *out,              /* Send output here */
+  sqlite3 *db,            /* Database to query */
+  const char *zSelect,    /* SELECT statement to extract content */
+  const char *zFirstRow   /* Print before first row, if not NULL */
+){
+  sqlite3_stmt *pSelect;
+  int rc;
+  rc = sqlite3_prepare(db, zSelect, -1, &pSelect, 0);
+  if( rc!=SQLITE_OK || !pSelect ){
+    return rc;
+  }
+  rc = sqlite3_step(pSelect);
+  while( rc==SQLITE_ROW ){
+    if( zFirstRow ){
+      fprintf(out, "%s", zFirstRow);
+      zFirstRow = 0;
+    }
+    fprintf(out, "%s;\n", sqlite3_column_text(pSelect, 0));
+    rc = sqlite3_step(pSelect);
+  }
+  return sqlite3_finalize(pSelect);
+}
+
+/*
+** Allocate space and save off current error string.
+*/
+static char *save_err_msg(
+  sqlite3 *db            /* Database to query */
+){
+  int nErrMsg = 1+strlen30(sqlite3_errmsg(db));
+  char *zErrMsg = sqlite3_malloc(nErrMsg);
+  if( zErrMsg ){
+    memcpy(zErrMsg, sqlite3_errmsg(db), nErrMsg);
+  }
+  return zErrMsg;
+}
+
+/*
+** Display memory stats.
+*/
+static int display_stats(
+  sqlite3 *db,                /* Database to query */
+  struct callback_data *pArg, /* Pointer to struct callback_data */
+  int bReset                  /* True to reset the stats */
+){
+  int iCur;
+  int iHiwtr;
+
+  if( pArg && pArg->out ){
+    
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_MEMORY_USED, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Memory Used:                         %d (max %d) bytes\n", iCur, iHiwtr);
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_MALLOC_COUNT, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Number of Outstanding Allocations:   %d (max %d)\n", iCur, iHiwtr);
+/*
+** Not currently used by the CLI.
+**    iHiwtr = iCur = -1;
+**    sqlite3_status(SQLITE_STATUS_PAGECACHE_USED, &iCur, &iHiwtr, bReset);
+**    fprintf(pArg->out, "Number of Pcache Pages Used:         %d (max %d) pages\n", iCur, iHiwtr);
+*/
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_PAGECACHE_OVERFLOW, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Number of Pcache Overflow Bytes:     %d (max %d) bytes\n", iCur, iHiwtr);
+/*
+** Not currently used by the CLI.
+**    iHiwtr = iCur = -1;
+**    sqlite3_status(SQLITE_STATUS_SCRATCH_USED, &iCur, &iHiwtr, bReset);
+**    fprintf(pArg->out, "Number of Scratch Allocations Used:  %d (max %d)\n", iCur, iHiwtr);
+*/
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_SCRATCH_OVERFLOW, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Number of Scratch Overflow Bytes:    %d (max %d) bytes\n", iCur, iHiwtr);
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_MALLOC_SIZE, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Largest Allocation:                  %d bytes\n", iHiwtr);
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_PAGECACHE_SIZE, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Largest Pcache Allocation:           %d bytes\n", iHiwtr);
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_SCRATCH_SIZE, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Largest Scratch Allocation:          %d bytes\n", iHiwtr);
+#ifdef YYTRACKMAXSTACKDEPTH
+    iHiwtr = iCur = -1;
+    sqlite3_status(SQLITE_STATUS_PARSER_STACK, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Deepest Parser Stack:                %d (max %d)\n", iCur, iHiwtr);
+#endif
+  }
+
+  if( pArg && pArg->out && db ){
+    iHiwtr = iCur = -1;
+    sqlite3_db_status(db, SQLITE_DBSTATUS_LOOKASIDE_USED, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Lookaside Slots Used:                %d (max %d)\n", iCur, iHiwtr);
+    sqlite3_db_status(db, SQLITE_DBSTATUS_LOOKASIDE_HIT, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Successful lookaside attempts:       %d\n", iHiwtr);
+    sqlite3_db_status(db, SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Lookaside failures due to size:      %d\n", iHiwtr);
+    sqlite3_db_status(db, SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Lookaside failures due to OOM:       %d\n", iHiwtr);
+    iHiwtr = iCur = -1;
+    sqlite3_db_status(db, SQLITE_DBSTATUS_CACHE_USED, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Pager Heap Usage:                    %d bytes\n", iCur); 
+    iHiwtr = iCur = -1;
+    sqlite3_db_status(db, SQLITE_DBSTATUS_SCHEMA_USED, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Schema Heap Usage:                   %d bytes\n", iCur); 
+    iHiwtr = iCur = -1;
+    sqlite3_db_status(db, SQLITE_DBSTATUS_STMT_USED, &iCur, &iHiwtr, bReset);
+    fprintf(pArg->out, "Statement Heap/Lookaside Usage:      %d bytes\n", iCur); 
+  }
+
+  if( pArg && pArg->out && db && pArg->pStmt ){
+    iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_FULLSCAN_STEP, bReset);
+    fprintf(pArg->out, "Fullscan Steps:                      %d\n", iCur);
+    iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_SORT, bReset);
+    fprintf(pArg->out, "Sort Operations:                     %d\n", iCur);
+    iCur = sqlite3_stmt_status(pArg->pStmt, SQLITE_STMTSTATUS_AUTOINDEX, bReset);
+    fprintf(pArg->out, "Autoindex Inserts:                   %d\n", iCur);
+  }
+
+  return 0;
+}
+
+/*
+** Execute a statement or set of statements.  Print 
+** any result rows/columns depending on the current mode 
+** set via the supplied callback.
+**
+** This is very similar to SQLite's built-in sqlite3_exec() 
+** function except it takes a slightly different callback 
+** and callback data argument.
+*/
+static int shell_exec(
+  sqlite3 *db,                                /* An open database */
+  const char *zSql,                           /* SQL to be evaluated */
+  int (*xCallback)(void*,int,char**,char**,int*),   /* Callback function */
+                                              /* (not the same as sqlite3_exec) */
+  struct callback_data *pArg,                 /* Pointer to struct callback_data */
+  char **pzErrMsg                             /* Error msg written here */
+){
+  sqlite3_stmt *pStmt = NULL;     /* Statement to execute. */
+  int rc = SQLITE_OK;             /* Return Code */
+  const char *zLeftover;          /* Tail of unprocessed SQL */
+
+  if( pzErrMsg ){
+    *pzErrMsg = NULL;
+  }
+
+  while( zSql[0] && (SQLITE_OK == rc) ){
+    rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, &zLeftover);
+    if( SQLITE_OK != rc ){
+      if( pzErrMsg ){
+        *pzErrMsg = save_err_msg(db);
+      }
+    }else{
+      if( !pStmt ){
+        /* this happens for a comment or white-space */
+        zSql = zLeftover;
+        while( isspace(zSql[0]) ) zSql++;
+        continue;
+      }
+
+      /* save off the prepared statment handle and reset row count */
+      if( pArg ){
+        pArg->pStmt = pStmt;
+        pArg->cnt = 0;
+      }
+
+      /* echo the sql statement if echo on */
+      if( pArg && pArg->echoOn ){
+        const char *zStmtSql = sqlite3_sql(pStmt);
+        fprintf(pArg->out, "%s\n", zStmtSql ? zStmtSql : zSql);
+      }
+
+      /* perform the first step.  this will tell us if we
+      ** have a result set or not and how wide it is.
+      */
+      rc = sqlite3_step(pStmt);
+      /* if we have a result set... */
+      if( SQLITE_ROW == rc ){
+        /* if we have a callback... */
+        if( xCallback ){
+          /* allocate space for col name ptr, value ptr, and type */
+          int nCol = sqlite3_column_count(pStmt);
+          void *pData = sqlite3_malloc(3*nCol*sizeof(const char*) + 1);
+          if( !pData ){
+            rc = SQLITE_NOMEM;
+          }else{
+            char **azCols = (char **)pData;      /* Names of result columns */
+            char **azVals = &azCols[nCol];       /* Results */
+            int *aiTypes = (int *)&azVals[nCol]; /* Result types */
+            int i;
+            assert(sizeof(int) <= sizeof(char *)); 
+            /* save off ptrs to column names */
+            for(i=0; i<nCol; i++){
+              azCols[i] = (char *)sqlite3_column_name(pStmt, i);
+            }
+            do{
+              /* extract the data and data types */
+              for(i=0; i<nCol; i++){
+                azVals[i] = (char *)sqlite3_column_text(pStmt, i);
+                aiTypes[i] = sqlite3_column_type(pStmt, i);
+                if( !azVals[i] && (aiTypes[i]!=SQLITE_NULL) ){
+                  rc = SQLITE_NOMEM;
+                  break; /* from for */
+                }
+              } /* end for */
+
+              /* if data and types extracted successfully... */
+              if( SQLITE_ROW == rc ){ 
+                /* call the supplied callback with the result row data */
+                if( xCallback(pArg, nCol, azVals, azCols, aiTypes) ){
+                  rc = SQLITE_ABORT;
+                }else{
+                  rc = sqlite3_step(pStmt);
+                }
+              }
+            } while( SQLITE_ROW == rc );
+            sqlite3_free(pData);
+          }
+        }else{
+          do{
+            rc = sqlite3_step(pStmt);
+          } while( rc == SQLITE_ROW );
+        }
+      }
+
+      /* print usage stats if stats on */
+      if( pArg && pArg->statsOn ){
+        display_stats(db, pArg, 0);
+      }
+
+      /* Finalize the statement just executed. If this fails, save a 
+      ** copy of the error message. Otherwise, set zSql to point to the
+      ** next statement to execute. */
+      rc = sqlite3_finalize(pStmt);
+      if( rc==SQLITE_OK ){
+        zSql = zLeftover;
+        while( isspace(zSql[0]) ) zSql++;
+      }else if( pzErrMsg ){
+        *pzErrMsg = save_err_msg(db);
+      }
+
+      /* clear saved stmt handle */
+      if( pArg ){
+        pArg->pStmt = NULL;
+      }
+    }
+  } /* end while */
+
+  return rc;
+}
+
+
+/*
+** This is a different callback routine used for dumping the database.
+** Each row received by this callback consists of a table name,
+** the table type ("index" or "table") and SQL to create the table.
+** This routine should print text sufficient to recreate the table.
+*/
+static int dump_callback(void *pArg, int nArg, char **azArg, char **azCol){
+  int rc;
+  const char *zTable;
+  const char *zType;
+  const char *zSql;
+  const char *zPrepStmt = 0;
+  struct callback_data *p = (struct callback_data *)pArg;
+
+  UNUSED_PARAMETER(azCol);
+  if( nArg!=3 ) return 1;
+  zTable = azArg[0];
+  zType = azArg[1];
+  zSql = azArg[2];
+  
+  if( strcmp(zTable, "sqlite_sequence")==0 ){
+    zPrepStmt = "DELETE FROM sqlite_sequence;\n";
+  }else if( strcmp(zTable, "sqlite_stat1")==0 ){
+    fprintf(p->out, "ANALYZE sqlite_master;\n");
+  }else if( strncmp(zTable, "sqlite_", 7)==0 ){
+    return 0;
+  }else if( strncmp(zSql, "CREATE VIRTUAL TABLE", 20)==0 ){
+    char *zIns;
+    if( !p->writableSchema ){
+      fprintf(p->out, "PRAGMA writable_schema=ON;\n");
+      p->writableSchema = 1;
+    }
+    zIns = sqlite3_mprintf(
+       "INSERT INTO sqlite_master(type,name,tbl_name,rootpage,sql)"
+       "VALUES('table','%q','%q',0,'%q');",
+       zTable, zTable, zSql);
+    fprintf(p->out, "%s\n", zIns);
+    sqlite3_free(zIns);
+    return 0;
+  }else{
+    fprintf(p->out, "%s;\n", zSql);
+  }
+
+  if( strcmp(zType, "table")==0 ){
+    sqlite3_stmt *pTableInfo = 0;
+    char *zSelect = 0;
+    char *zTableInfo = 0;
+    char *zTmp = 0;
+    int nRow = 0;
+   
+    zTableInfo = appendText(zTableInfo, "PRAGMA table_info(", 0);
+    zTableInfo = appendText(zTableInfo, zTable, '"');
+    zTableInfo = appendText(zTableInfo, ");", 0);
+
+    rc = sqlite3_prepare(p->db, zTableInfo, -1, &pTableInfo, 0);
+    free(zTableInfo);
+    if( rc!=SQLITE_OK || !pTableInfo ){
+      return 1;
+    }
+
+    zSelect = appendText(zSelect, "SELECT 'INSERT INTO ' || ", 0);
+    zTmp = appendText(zTmp, zTable, '"');
+    if( zTmp ){
+      zSelect = appendText(zSelect, zTmp, '\'');
+    }
+    zSelect = appendText(zSelect, " || ' VALUES(' || ", 0);
+    rc = sqlite3_step(pTableInfo);
+    while( rc==SQLITE_ROW ){
+      const char *zText = (const char *)sqlite3_column_text(pTableInfo, 1);
+      zSelect = appendText(zSelect, "quote(", 0);
+      zSelect = appendText(zSelect, zText, '"');
+      rc = sqlite3_step(pTableInfo);
+      if( rc==SQLITE_ROW ){
+        zSelect = appendText(zSelect, ") || ',' || ", 0);
+      }else{
+        zSelect = appendText(zSelect, ") ", 0);
+      }
+      nRow++;
+    }
+    rc = sqlite3_finalize(pTableInfo);
+    if( rc!=SQLITE_OK || nRow==0 ){
+      free(zSelect);
+      return 1;
+    }
+    zSelect = appendText(zSelect, "|| ')' FROM  ", 0);
+    zSelect = appendText(zSelect, zTable, '"');
+
+    rc = run_table_dump_query(p->out, p->db, zSelect, zPrepStmt);
+    if( rc==SQLITE_CORRUPT ){
+      zSelect = appendText(zSelect, " ORDER BY rowid DESC", 0);
+      rc = run_table_dump_query(p->out, p->db, zSelect, 0);
+    }
+    if( zSelect ) free(zSelect);
+  }
+  return 0;
+}
+
+/*
+** Run zQuery.  Use dump_callback() as the callback routine so that
+** the contents of the query are output as SQL statements.
+**
+** If we get a SQLITE_CORRUPT error, rerun the query after appending
+** "ORDER BY rowid DESC" to the end.
+*/
+static int run_schema_dump_query(
+  struct callback_data *p, 
+  const char *zQuery,
+  char **pzErrMsg
+){
+  int rc;
+  rc = sqlite3_exec(p->db, zQuery, dump_callback, p, pzErrMsg);
+  if( rc==SQLITE_CORRUPT ){
+    char *zQ2;
+    int len = strlen30(zQuery);
+    if( pzErrMsg ) sqlite3_free(*pzErrMsg);
+    zQ2 = malloc( len+100 );
+    if( zQ2==0 ) return rc;
+    sqlite3_snprintf(sizeof(zQ2), zQ2, "%s ORDER BY rowid DESC", zQuery);
+    rc = sqlite3_exec(p->db, zQ2, dump_callback, p, pzErrMsg);
+    free(zQ2);
+  }
+  return rc;
+}
+
+/*
+** Text of a help message
+*/
+static char zHelp[] =
+  ".backup ?DB? FILE      Backup DB (default \"main\") to FILE\n"
+  ".bail ON|OFF           Stop after hitting an error.  Default OFF\n"
+  ".databases             List names and files of attached databases\n"
+  ".dump ?TABLE? ...      Dump the database in an SQL text format\n"
+  "                         If TABLE specified, only dump tables matching\n"
+  "                         LIKE pattern TABLE.\n"
+  ".echo ON|OFF           Turn command echo on or off\n"
+  ".exit                  Exit this program\n"
+  ".explain ?ON|OFF?      Turn output mode suitable for EXPLAIN on or off.\n"
+  "                         With no args, it turns EXPLAIN on.\n"
+  ".header(s) ON|OFF      Turn display of headers on or off\n"
+  ".help                  Show this message\n"
+  ".import FILE TABLE     Import data from FILE into TABLE\n"
+  ".indices ?TABLE?       Show names of all indices\n"
+  "                         If TABLE specified, only show indices for tables\n"
+  "                         matching LIKE pattern TABLE.\n"
+#ifdef SQLITE_ENABLE_IOTRACE
+  ".iotrace FILE          Enable I/O diagnostic logging to FILE\n"
+#endif
+#ifndef SQLITE_OMIT_LOAD_EXTENSION
+  ".load FILE ?ENTRY?     Load an extension library\n"
+#endif
+  ".log FILE|off          Turn logging on or off.  FILE can be stderr/stdout\n"
+  ".mode MODE ?TABLE?     Set output mode where MODE is one of:\n"
+  "                         csv      Comma-separated values\n"
+  "                         column   Left-aligned columns.  (See .width)\n"
+  "                         html     HTML <table> code\n"
+  "                         insert   SQL insert statements for TABLE\n"
+  "                         line     One value per line\n"
+  "                         list     Values delimited by .separator string\n"
+  "                         tabs     Tab-separated values\n"
+  "                         tcl      TCL list elements\n"
+  ".nullvalue STRING      Print STRING in place of NULL values\n"
+  ".output FILENAME       Send output to FILENAME\n"
+  ".output stdout         Send output to the screen\n"
+  ".prompt MAIN CONTINUE  Replace the standard prompts\n"
+  ".quit                  Exit this program\n"
+  ".read FILENAME         Execute SQL in FILENAME\n"
+  ".restore ?DB? FILE     Restore content of DB (default \"main\") from FILE\n"
+  ".schema ?TABLE?        Show the CREATE statements\n"
+  "                         If TABLE specified, only show tables matching\n"
+  "                         LIKE pattern TABLE.\n"
+  ".separator STRING      Change separator used by output mode and .import\n"
+  ".show                  Show the current values for various settings\n"
+  ".stats ON|OFF          Turn stats on or off\n"
+  ".tables ?TABLE?        List names of tables\n"
+  "                         If TABLE specified, only list tables matching\n"
+  "                         LIKE pattern TABLE.\n"
+  ".timeout MS            Try opening locked tables for MS milliseconds\n"
+  ".width NUM1 NUM2 ...   Set column widths for \"column\" mode\n"
+;
+
+static char zTimerHelp[] =
+  ".timer ON|OFF          Turn the CPU timer measurement on or off\n"
+;
+
+/* Forward reference */
+static int process_input(struct callback_data *p, FILE *in);
+
+/*
+** Make sure the database is open.  If it is not, then open it.  If
+** the database fails to open, print an error message and exit.
+*/
+static void open_db(struct callback_data *p){
+  if( p->db==0 ){
+    sqlite3_open(p->zDbFilename, &p->db);
+    db = p->db;
+    if( db && sqlite3_errcode(db)==SQLITE_OK ){
+      sqlite3_create_function(db, "shellstatic", 0, SQLITE_UTF8, 0,
+          shellstaticFunc, 0, 0);
+    }
+    if( db==0 || SQLITE_OK!=sqlite3_errcode(db) ){
+      fprintf(stderr,"Error: unable to open database \"%s\": %s\n", 
+          p->zDbFilename, sqlite3_errmsg(db));
+      exit(1);
+    }
+#ifndef SQLITE_OMIT_LOAD_EXTENSION
+    sqlite3_enable_load_extension(p->db, 1);
+#endif
+  }
+}
+
+/*
+** Do C-language style dequoting.
+**
+**    \t    -> tab
+**    \n    -> newline
+**    \r    -> carriage return
+**    \NNN  -> ascii character NNN in octal
+**    \\    -> backslash
+*/
+static void resolve_backslashes(char *z){
+  int i, j;
+  char c;
+  for(i=j=0; (c = z[i])!=0; i++, j++){
+    if( c=='\\' ){
+      c = z[++i];
+      if( c=='n' ){
+        c = '\n';
+      }else if( c=='t' ){
+        c = '\t';
+      }else if( c=='r' ){
+        c = '\r';
+      }else if( c>='0' && c<='7' ){
+        c -= '0';
+        if( z[i+1]>='0' && z[i+1]<='7' ){
+          i++;
+          c = (c<<3) + z[i] - '0';
+          if( z[i+1]>='0' && z[i+1]<='7' ){
+            i++;
+            c = (c<<3) + z[i] - '0';
+          }
+        }
+      }
+    }
+    z[j] = c;
+  }
+  z[j] = 0;
+}
+
+/*
+** Interpret zArg as a boolean value.  Return either 0 or 1.
+*/
+static int booleanValue(char *zArg){
+  int val = atoi(zArg);
+  int j;
+  for(j=0; zArg[j]; j++){
+    zArg[j] = (char)tolower(zArg[j]);
+  }
+  if( strcmp(zArg,"on")==0 ){
+    val = 1;
+  }else if( strcmp(zArg,"yes")==0 ){
+    val = 1;
+  }
+  return val;
+}
+
+/*
+** If an input line begins with "." then invoke this routine to
+** process that line.
+**
+** Return 1 on error, 2 to exit, and 0 otherwise.
+*/
+static int do_meta_command(char *zLine, struct callback_data *p){
+  int i = 1;
+  int nArg = 0;
+  int n, c;
+  int rc = 0;
+  char *azArg[50];
+
+  /* Parse the input line into tokens.
+  */
+  while( zLine[i] && nArg<ArraySize(azArg) ){
+    while( isspace((unsigned char)zLine[i]) ){ i++; }
+    if( zLine[i]==0 ) break;
+    if( zLine[i]=='\'' || zLine[i]=='"' ){
+      int delim = zLine[i++];
+      azArg[nArg++] = &zLine[i];
+      while( zLine[i] && zLine[i]!=delim ){ i++; }
+      if( zLine[i]==delim ){
+        zLine[i++] = 0;
+      }
+      if( delim=='"' ) resolve_backslashes(azArg[nArg-1]);
+    }else{
+      azArg[nArg++] = &zLine[i];
+      while( zLine[i] && !isspace((unsigned char)zLine[i]) ){ i++; }
+      if( zLine[i] ) zLine[i++] = 0;
+      resolve_backslashes(azArg[nArg-1]);
+    }
+  }
+
+  /* Process the input line.
+  */
+  if( nArg==0 ) return 0; /* no tokens, no error */
+  n = strlen30(azArg[0]);
+  c = azArg[0][0];
+  if( c=='b' && n>=3 && strncmp(azArg[0], "backup", n)==0 && nArg>1 && nArg<4){
+    const char *zDestFile;
+    const char *zDb;
+    sqlite3 *pDest;
+    sqlite3_backup *pBackup;
+    if( nArg==2 ){
+      zDestFile = azArg[1];
+      zDb = "main";
+    }else{
+      zDestFile = azArg[2];
+      zDb = azArg[1];
+    }
+    rc = sqlite3_open(zDestFile, &pDest);
+    if( rc!=SQLITE_OK ){
+      fprintf(stderr, "Error: cannot open \"%s\"\n", zDestFile);
+      sqlite3_close(pDest);
+      return 1;
+    }
+    open_db(p);
+    pBackup = sqlite3_backup_init(pDest, "main", p->db, zDb);
+    if( pBackup==0 ){
+      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(pDest));
+      sqlite3_close(pDest);
+      return 1;
+    }
+    while(  (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK ){}
+    sqlite3_backup_finish(pBackup);
+    if( rc==SQLITE_DONE ){
+      rc = 0;
+    }else{
+      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(pDest));
+      rc = 1;
+    }
+    sqlite3_close(pDest);
+  }else
+
+  if( c=='b' && n>=3 && strncmp(azArg[0], "bail", n)==0 && nArg>1 && nArg<3 ){
+    bail_on_error = booleanValue(azArg[1]);
+  }else
+
+  if( c=='d' && n>1 && strncmp(azArg[0], "databases", n)==0 && nArg==1 ){
+    struct callback_data data;
+    char *zErrMsg = 0;
+    open_db(p);
+    memcpy(&data, p, sizeof(data));
+    data.showHeader = 1;
+    data.mode = MODE_Column;
+    data.colWidth[0] = 3;
+    data.colWidth[1] = 15;
+    data.colWidth[2] = 58;
+    data.cnt = 0;
+    sqlite3_exec(p->db, "PRAGMA database_list; ", callback, &data, &zErrMsg);
+    if( zErrMsg ){
+      fprintf(stderr,"Error: %s\n", zErrMsg);
+      sqlite3_free(zErrMsg);
+      rc = 1;
+    }
+  }else
+
+  if( c=='d' && strncmp(azArg[0], "dump", n)==0 && nArg<3 ){
+    char *zErrMsg = 0;
+    open_db(p);
+    /* When playing back a "dump", the content might appear in an order
+    ** which causes immediate foreign key constraints to be violated.
+    ** So disable foreign-key constraint enforcement to prevent problems. */
+    fprintf(p->out, "PRAGMA foreign_keys=OFF;\n");
+    fprintf(p->out, "BEGIN TRANSACTION;\n");
+    p->writableSchema = 0;
+    sqlite3_exec(p->db, "PRAGMA writable_schema=ON", 0, 0, 0);
+    if( nArg==1 ){
+      run_schema_dump_query(p, 
+        "SELECT name, type, sql FROM sqlite_master "
+        "WHERE sql NOT NULL AND type=='table' AND name!='sqlite_sequence'", 0
+      );
+      run_schema_dump_query(p, 
+        "SELECT name, type, sql FROM sqlite_master "
+        "WHERE name=='sqlite_sequence'", 0
+      );
+      run_table_dump_query(p->out, p->db,
+        "SELECT sql FROM sqlite_master "
+        "WHERE sql NOT NULL AND type IN ('index','trigger','view')", 0
+      );
+    }else{
+      int i;
+      for(i=1; i<nArg; i++){
+        zShellStatic = azArg[i];
+        run_schema_dump_query(p,
+          "SELECT name, type, sql FROM sqlite_master "
+          "WHERE tbl_name LIKE shellstatic() AND type=='table'"
+          "  AND sql NOT NULL", 0);
+        run_table_dump_query(p->out, p->db,
+          "SELECT sql FROM sqlite_master "
+          "WHERE sql NOT NULL"
+          "  AND type IN ('index','trigger','view')"
+          "  AND tbl_name LIKE shellstatic()", 0
+        );
+        zShellStatic = 0;
+      }
+    }
+    if( p->writableSchema ){
+      fprintf(p->out, "PRAGMA writable_schema=OFF;\n");
+      p->writableSchema = 0;
+    }
+    sqlite3_exec(p->db, "PRAGMA writable_schema=OFF", 0, 0, 0);
+    if( zErrMsg ){
+      fprintf(stderr,"Error: %s\n", zErrMsg);
+      sqlite3_free(zErrMsg);
+    }else{
+      fprintf(p->out, "COMMIT;\n");
+    }
+  }else
+
+  if( c=='e' && strncmp(azArg[0], "echo", n)==0 && nArg>1 && nArg<3 ){
+    p->echoOn = booleanValue(azArg[1]);
+  }else
+
+  if( c=='e' && strncmp(azArg[0], "exit", n)==0  && nArg==1 ){
+    rc = 2;
+  }else
+
+  if( c=='e' && strncmp(azArg[0], "explain", n)==0 && nArg<3 ){
+    int val = nArg>=2 ? booleanValue(azArg[1]) : 1;
+    if(val == 1) {
+      if(!p->explainPrev.valid) {
+        p->explainPrev.valid = 1;
+        p->explainPrev.mode = p->mode;
+        p->explainPrev.showHeader = p->showHeader;
+        memcpy(p->explainPrev.colWidth,p->colWidth,sizeof(p->colWidth));
+      }
+      /* We could put this code under the !p->explainValid
+      ** condition so that it does not execute if we are already in
+      ** explain mode. However, always executing it allows us an easy
+      ** was to reset to explain mode in case the user previously
+      ** did an .explain followed by a .width, .mode or .header
+      ** command.
+      */
+      p->mode = MODE_Explain;
+      p->showHeader = 1;
+      memset(p->colWidth,0,ArraySize(p->colWidth));
+      p->colWidth[0] = 4;                  /* addr */
+      p->colWidth[1] = 13;                 /* opcode */
+      p->colWidth[2] = 4;                  /* P1 */
+      p->colWidth[3] = 4;                  /* P2 */
+      p->colWidth[4] = 4;                  /* P3 */
+      p->colWidth[5] = 13;                 /* P4 */
+      p->colWidth[6] = 2;                  /* P5 */
+      p->colWidth[7] = 13;                  /* Comment */
+    }else if (p->explainPrev.valid) {
+      p->explainPrev.valid = 0;
+      p->mode = p->explainPrev.mode;
+      p->showHeader = p->explainPrev.showHeader;
+      memcpy(p->colWidth,p->explainPrev.colWidth,sizeof(p->colWidth));
+    }
+  }else
+
+  if( c=='h' && (strncmp(azArg[0], "header", n)==0 ||
+                 strncmp(azArg[0], "headers", n)==0) && nArg>1 && nArg<3 ){
+    p->showHeader = booleanValue(azArg[1]);
+  }else
+
+  if( c=='h' && strncmp(azArg[0], "help", n)==0 ){
+    fprintf(stderr,"%s",zHelp);
+    if( HAS_TIMER ){
+      fprintf(stderr,"%s",zTimerHelp);
+    }
+  }else
+
+  if( c=='i' && strncmp(azArg[0], "import", n)==0 && nArg==3 ){
+    char *zTable = azArg[2];    /* Insert data into this table */
+    char *zFile = azArg[1];     /* The file from which to extract data */
+    sqlite3_stmt *pStmt = NULL; /* A statement */
+    int nCol;                   /* Number of columns in the table */
+    int nByte;                  /* Number of bytes in an SQL string */
+    int i, j;                   /* Loop counters */
+    int nSep;                   /* Number of bytes in p->separator[] */
+    char *zSql;                 /* An SQL statement */
+    char *zLine;                /* A single line of input from the file */
+    char **azCol;               /* zLine[] broken up into columns */
+    char *zCommit;              /* How to commit changes */   
+    FILE *in;                   /* The input file */
+    int lineno = 0;             /* Line number of input file */
+
+    open_db(p);
+    nSep = strlen30(p->separator);
+    if( nSep==0 ){
+      fprintf(stderr, "Error: non-null separator required for import\n");
+      return 1;
+    }
+    zSql = sqlite3_mprintf("SELECT * FROM '%q'", zTable);
+    if( zSql==0 ){
+      fprintf(stderr, "Error: out of memory\n");
+      return 1;
+    }
+    nByte = strlen30(zSql);
+    rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
+    sqlite3_free(zSql);
+    if( rc ){
+      if (pStmt) sqlite3_finalize(pStmt);
+      fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
+      return 1;
+    }
+    nCol = sqlite3_column_count(pStmt);
+    sqlite3_finalize(pStmt);
+    pStmt = 0;
+    if( nCol==0 ) return 0; /* no columns, no error */
+    zSql = malloc( nByte + 20 + nCol*2 );
+    if( zSql==0 ){
+      fprintf(stderr, "Error: out of memory\n");
+      return 1;
+    }
+    sqlite3_snprintf(nByte+20, zSql, "INSERT INTO '%q' VALUES(?", zTable);
+    j = strlen30(zSql);
+    for(i=1; i<nCol; i++){
+      zSql[j++] = ',';
+      zSql[j++] = '?';
+    }
+    zSql[j++] = ')';
+    zSql[j] = 0;
+    rc = sqlite3_prepare(p->db, zSql, -1, &pStmt, 0);
+    free(zSql);
+    if( rc ){
+      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(db));
+      if (pStmt) sqlite3_finalize(pStmt);
+      return 1;
+    }
+    in = fopen(zFile, "rb");
+    if( in==0 ){
+      fprintf(stderr, "Error: cannot open \"%s\"\n", zFile);
+      sqlite3_finalize(pStmt);
+      return 1;
+    }
+    azCol = malloc( sizeof(azCol[0])*(nCol+1) );
+    if( azCol==0 ){
+      fprintf(stderr, "Error: out of memory\n");
+      fclose(in);
+      sqlite3_finalize(pStmt);
+      return 1;
+    }
+    sqlite3_exec(p->db, "BEGIN", 0, 0, 0);
+    zCommit = "COMMIT";
+    while( (zLine = local_getline(0, in))!=0 ){
+      char *z;
+      i = 0;
+      lineno++;
+      azCol[0] = zLine;
+      for(i=0, z=zLine; *z && *z!='\n' && *z!='\r'; z++){
+        if( *z==p->separator[0] && strncmp(z, p->separator, nSep)==0 ){
+          *z = 0;
+          i++;
+          if( i<nCol ){
+            azCol[i] = &z[nSep];
+            z += nSep-1;
+          }
+        }
+      } /* end for */
+      *z = 0;
+      if( i+1!=nCol ){
+        fprintf(stderr,
+                "Error: %s line %d: expected %d columns of data but found %d\n",
+                zFile, lineno, nCol, i+1);
+        zCommit = "ROLLBACK";
+        free(zLine);
+        rc = 1;
+        break; /* from while */
+      }
+      for(i=0; i<nCol; i++){
+        sqlite3_bind_text(pStmt, i+1, azCol[i], -1, SQLITE_STATIC);
+      }
+      sqlite3_step(pStmt);
+      rc = sqlite3_reset(pStmt);
+      free(zLine);
+      if( rc!=SQLITE_OK ){
+        fprintf(stderr,"Error: %s\n", sqlite3_errmsg(db));
+        zCommit = "ROLLBACK";
+        rc = 1;
+        break; /* from while */
+      }
+    } /* end while */
+    free(azCol);
+    fclose(in);
+    sqlite3_finalize(pStmt);
+    sqlite3_exec(p->db, zCommit, 0, 0, 0);
+  }else
+
+  if( c=='i' && strncmp(azArg[0], "indices", n)==0 && nArg<3 ){
+    struct callback_data data;
+    char *zErrMsg = 0;
+    open_db(p);
+    memcpy(&data, p, sizeof(data));
+    data.showHeader = 0;
+    data.mode = MODE_List;
+    if( nArg==1 ){
+      rc = sqlite3_exec(p->db,
+        "SELECT name FROM sqlite_master "
+        "WHERE type='index' AND name NOT LIKE 'sqlite_%' "
+        "UNION ALL "
+        "SELECT name FROM sqlite_temp_master "
+        "WHERE type='index' "
+        "ORDER BY 1",
+        callback, &data, &zErrMsg
+      );
+    }else{
+      zShellStatic = azArg[1];
+      rc = sqlite3_exec(p->db,
+        "SELECT name FROM sqlite_master "
+        "WHERE type='index' AND tbl_name LIKE shellstatic() "
+        "UNION ALL "
+        "SELECT name FROM sqlite_temp_master "
+        "WHERE type='index' AND tbl_name LIKE shellstatic() "
+        "ORDER BY 1",
+        callback, &data, &zErrMsg
+      );
+      zShellStatic = 0;
+    }
+    if( zErrMsg ){
+      fprintf(stderr,"Error: %s\n", zErrMsg);
+      sqlite3_free(zErrMsg);
+      rc = 1;
+    }else if( rc != SQLITE_OK ){
+      fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n");
+      rc = 1;
+    }
+  }else
+
+#ifdef SQLITE_ENABLE_IOTRACE
+  if( c=='i' && strncmp(azArg[0], "iotrace", n)==0 ){
+    extern void (*sqlite3IoTrace)(const char*, ...);
+    if( iotrace && iotrace!=stdout ) fclose(iotrace);
+    iotrace = 0;
+    if( nArg<2 ){
+      sqlite3IoTrace = 0;
+    }else if( strcmp(azArg[1], "-")==0 ){
+      sqlite3IoTrace = iotracePrintf;
+      iotrace = stdout;
+    }else{
+      iotrace = fopen(azArg[1], "w");
+      if( iotrace==0 ){
+        fprintf(stderr, "Error: cannot open \"%s\"\n", azArg[1]);
+        sqlite3IoTrace = 0;
+        rc = 1;
+      }else{
+        sqlite3IoTrace = iotracePrintf;
+      }
+    }
+  }else
+#endif
+
+#ifndef SQLITE_OMIT_LOAD_EXTENSION
+  if( c=='l' && strncmp(azArg[0], "load", n)==0 && nArg>=2 ){
+    const char *zFile, *zProc;
+    char *zErrMsg = 0;
+    zFile = azArg[1];
+    zProc = nArg>=3 ? azArg[2] : 0;
+    open_db(p);
+    rc = sqlite3_load_extension(p->db, zFile, zProc, &zErrMsg);
+    if( rc!=SQLITE_OK ){
+      fprintf(stderr, "Error: %s\n", zErrMsg);
+      sqlite3_free(zErrMsg);
+      rc = 1;
+    }
+  }else
+#endif
+
+  if( c=='l' && strncmp(azArg[0], "log", n)==0 && nArg>=2 ){
+    const char *zFile = azArg[1];
+    if( p->pLog && p->pLog!=stdout && p->pLog!=stderr ){
+      fclose(p->pLog);
+      p->pLog = 0;
+    }
+    if( strcmp(zFile,"stdout")==0 ){
+      p->pLog = stdout;
+    }else if( strcmp(zFile, "stderr")==0 ){
+      p->pLog = stderr;
+    }else if( strcmp(zFile, "off")==0 ){
+      p->pLog = 0;
+    }else{
+      p->pLog = fopen(zFile, "w");
+      if( p->pLog==0 ){
+        fprintf(stderr, "Error: cannot open \"%s\"\n", zFile);
+      }
+    }
+  }else
+
+  if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==2 ){
+    int n2 = strlen30(azArg[1]);
+    if( (n2==4 && strncmp(azArg[1],"line",n2)==0)
+        ||
+        (n2==5 && strncmp(azArg[1],"lines",n2)==0) ){
+      p->mode = MODE_Line;
+    }else if( (n2==6 && strncmp(azArg[1],"column",n2)==0)
+              ||
+              (n2==7 && strncmp(azArg[1],"columns",n2)==0) ){
+      p->mode = MODE_Column;
+    }else if( n2==4 && strncmp(azArg[1],"list",n2)==0 ){
+      p->mode = MODE_List;
+    }else if( n2==4 && strncmp(azArg[1],"html",n2)==0 ){
+      p->mode = MODE_Html;
+    }else if( n2==3 && strncmp(azArg[1],"tcl",n2)==0 ){
+      p->mode = MODE_Tcl;
+    }else if( n2==3 && strncmp(azArg[1],"csv",n2)==0 ){
+      p->mode = MODE_Csv;
+      sqlite3_snprintf(sizeof(p->separator), p->separator, ",");
+    }else if( n2==4 && strncmp(azArg[1],"tabs",n2)==0 ){
+      p->mode = MODE_List;
+      sqlite3_snprintf(sizeof(p->separator), p->separator, "\t");
+    }else if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){
+      p->mode = MODE_Insert;
+      set_table_name(p, "table");
+    }else {
+      fprintf(stderr,"Error: mode should be one of: "
+         "column csv html insert line list tabs tcl\n");
+      rc = 1;
+    }
+  }else
+
+  if( c=='m' && strncmp(azArg[0], "mode", n)==0 && nArg==3 ){
+    int n2 = strlen30(azArg[1]);
+    if( n2==6 && strncmp(azArg[1],"insert",n2)==0 ){
+      p->mode = MODE_Insert;
+      set_table_name(p, azArg[2]);
+    }else {
+      fprintf(stderr, "Error: invalid arguments: "
+        " \"%s\". Enter \".help\" for help\n", azArg[2]);
+      rc = 1;
+    }
+  }else
+
+  if( c=='n' && strncmp(azArg[0], "nullvalue", n)==0 && nArg==2 ) {
+    sqlite3_snprintf(sizeof(p->nullvalue), p->nullvalue,
+                     "%.*s", (int)ArraySize(p->nullvalue)-1, azArg[1]);
+  }else
+
+  if( c=='o' && strncmp(azArg[0], "output", n)==0 && nArg==2 ){
+    if( p->out!=stdout ){
+      fclose(p->out);
+    }
+    if( strcmp(azArg[1],"stdout")==0 ){
+      p->out = stdout;
+      sqlite3_snprintf(sizeof(p->outfile), p->outfile, "stdout");
+    }else{
+      p->out = fopen(azArg[1], "wb");
+      if( p->out==0 ){
+        fprintf(stderr,"Error: cannot write to \"%s\"\n", azArg[1]);
+        p->out = stdout;
+        rc = 1;
+      } else {
+         sqlite3_snprintf(sizeof(p->outfile), p->outfile, "%s", azArg[1]);
+      }
+    }
+  }else
+
+  if( c=='p' && strncmp(azArg[0], "prompt", n)==0 && (nArg==2 || nArg==3)){
+    if( nArg >= 2) {
+      strncpy(mainPrompt,azArg[1],(int)ArraySize(mainPrompt)-1);
+    }
+    if( nArg >= 3) {
+      strncpy(continuePrompt,azArg[2],(int)ArraySize(continuePrompt)-1);
+    }
+  }else
+
+  if( c=='q' && strncmp(azArg[0], "quit", n)==0 && nArg==1 ){
+    rc = 2;
+  }else
+
+  if( c=='r' && n>=3 && strncmp(azArg[0], "read", n)==0 && nArg==2 ){
+    FILE *alt = fopen(azArg[1], "rb");
+    if( alt==0 ){
+      fprintf(stderr,"Error: cannot open \"%s\"\n", azArg[1]);
+      rc = 1;
+    }else{
+      rc = process_input(p, alt);
+      fclose(alt);
+    }
+  }else
+
+  if( c=='r' && n>=3 && strncmp(azArg[0], "restore", n)==0 && nArg>1 && nArg<4){
+    const char *zSrcFile;
+    const char *zDb;
+    sqlite3 *pSrc;
+    sqlite3_backup *pBackup;
+    int nTimeout = 0;
+
+    if( nArg==2 ){
+      zSrcFile = azArg[1];
+      zDb = "main";
+    }else{
+      zSrcFile = azArg[2];
+      zDb = azArg[1];
+    }
+    rc = sqlite3_open(zSrcFile, &pSrc);
+    if( rc!=SQLITE_OK ){
+      fprintf(stderr, "Error: cannot open \"%s\"\n", zSrcFile);
+      sqlite3_close(pSrc);
+      return 1;
+    }
+    open_db(p);
+    pBackup = sqlite3_backup_init(p->db, zDb, pSrc, "main");
+    if( pBackup==0 ){
+      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(p->db));
+      sqlite3_close(pSrc);
+      return 1;
+    }
+    while( (rc = sqlite3_backup_step(pBackup,100))==SQLITE_OK
+          || rc==SQLITE_BUSY  ){
+      if( rc==SQLITE_BUSY ){
+        if( nTimeout++ >= 3 ) break;
+        sqlite3_sleep(100);
+      }
+    }
+    sqlite3_backup_finish(pBackup);
+    if( rc==SQLITE_DONE ){
+      rc = 0;
+    }else if( rc==SQLITE_BUSY || rc==SQLITE_LOCKED ){
+      fprintf(stderr, "Error: source database is busy\n");
+      rc = 1;
+    }else{
+      fprintf(stderr, "Error: %s\n", sqlite3_errmsg(p->db));
+      rc = 1;
+    }
+    sqlite3_close(pSrc);
+  }else
+
+  if( c=='s' && strncmp(azArg[0], "schema", n)==0 && nArg<3 ){
+    struct callback_data data;
+    char *zErrMsg = 0;
+    open_db(p);
+    memcpy(&data, p, sizeof(data));
+    data.showHeader = 0;
+    data.mode = MODE_Semi;
+    if( nArg>1 ){
+      int i;
+      for(i=0; azArg[1][i]; i++) azArg[1][i] = (char)tolower(azArg[1][i]);
+      if( strcmp(azArg[1],"sqlite_master")==0 ){
+        char *new_argv[2], *new_colv[2];
+        new_argv[0] = "CREATE TABLE sqlite_master (\n"
+                      "  type text,\n"
+                      "  name text,\n"
+                      "  tbl_name text,\n"
+                      "  rootpage integer,\n"
+                      "  sql text\n"
+                      ")";
+        new_argv[1] = 0;
+        new_colv[0] = "sql";
+        new_colv[1] = 0;
+        callback(&data, 1, new_argv, new_colv);
+        rc = SQLITE_OK;
+      }else if( strcmp(azArg[1],"sqlite_temp_master")==0 ){
+        char *new_argv[2], *new_colv[2];
+        new_argv[0] = "CREATE TEMP TABLE sqlite_temp_master (\n"
+                      "  type text,\n"
+                      "  name text,\n"
+                      "  tbl_name text,\n"
+                      "  rootpage integer,\n"
+                      "  sql text\n"
+                      ")";
+        new_argv[1] = 0;
+        new_colv[0] = "sql";
+        new_colv[1] = 0;
+        callback(&data, 1, new_argv, new_colv);
+        rc = SQLITE_OK;
+      }else{
+        zShellStatic = azArg[1];
+        rc = sqlite3_exec(p->db,
+          "SELECT sql FROM "
+          "  (SELECT sql sql, type type, tbl_name tbl_name, name name"
+          "     FROM sqlite_master UNION ALL"
+          "   SELECT sql, type, tbl_name, name FROM sqlite_temp_master) "
+          "WHERE tbl_name LIKE shellstatic() AND type!='meta' AND sql NOTNULL "
+          "ORDER BY substr(type,2,1), name",
+          callback, &data, &zErrMsg);
+        zShellStatic = 0;
+      }
+    }else{
+      rc = sqlite3_exec(p->db,
+         "SELECT sql FROM "
+         "  (SELECT sql sql, type type, tbl_name tbl_name, name name"
+         "     FROM sqlite_master UNION ALL"
+         "   SELECT sql, type, tbl_name, name FROM sqlite_temp_master) "
+         "WHERE type!='meta' AND sql NOTNULL AND name NOT LIKE 'sqlite_%'"
+         "ORDER BY substr(type,2,1), name",
+         callback, &data, &zErrMsg
+      );
+    }
+    if( zErrMsg ){
+      fprintf(stderr,"Error: %s\n", zErrMsg);
+      sqlite3_free(zErrMsg);
+      rc = 1;
+    }else if( rc != SQLITE_OK ){
+      fprintf(stderr,"Error: querying schema information\n");
+      rc = 1;
+    }else{
+      rc = 0;
+    }
+  }else
+
+  if( c=='s' && strncmp(azArg[0], "separator", n)==0 && nArg==2 ){
+    sqlite3_snprintf(sizeof(p->separator), p->separator,
+                     "%.*s", (int)sizeof(p->separator)-1, azArg[1]);
+  }else
+
+  if( c=='s' && strncmp(azArg[0], "show", n)==0 && nArg==1 ){
+    int i;
+    fprintf(p->out,"%9.9s: %s\n","echo", p->echoOn ? "on" : "off");
+    fprintf(p->out,"%9.9s: %s\n","explain", p->explainPrev.valid ? "on" :"off");
+    fprintf(p->out,"%9.9s: %s\n","headers", p->showHeader ? "on" : "off");
+    fprintf(p->out,"%9.9s: %s\n","mode", modeDescr[p->mode]);
+    fprintf(p->out,"%9.9s: ", "nullvalue");
+      output_c_string(p->out, p->nullvalue);
+      fprintf(p->out, "\n");
+    fprintf(p->out,"%9.9s: %s\n","output",
+            strlen30(p->outfile) ? p->outfile : "stdout");
+    fprintf(p->out,"%9.9s: ", "separator");
+      output_c_string(p->out, p->separator);
+      fprintf(p->out, "\n");
+    fprintf(p->out,"%9.9s: %s\n","stats", p->statsOn ? "on" : "off");
+    fprintf(p->out,"%9.9s: ","width");
+    for (i=0;i<(int)ArraySize(p->colWidth) && p->colWidth[i] != 0;i++) {
+      fprintf(p->out,"%d ",p->colWidth[i]);
+    }
+    fprintf(p->out,"\n");
+  }else
+
+  if( c=='s' && strncmp(azArg[0], "stats", n)==0 && nArg>1 && nArg<3 ){
+    p->statsOn = booleanValue(azArg[1]);
+  }else
+
+  if( c=='t' && n>1 && strncmp(azArg[0], "tables", n)==0 && nArg<3 ){
+    char **azResult;
+    int nRow;
+    char *zErrMsg;
+    open_db(p);
+    if( nArg==1 ){
+      rc = sqlite3_get_table(p->db,
+        "SELECT name FROM sqlite_master "
+        "WHERE type IN ('table','view') AND name NOT LIKE 'sqlite_%' "
+        "UNION ALL "
+        "SELECT name FROM sqlite_temp_master "
+        "WHERE type IN ('table','view') "
+        "ORDER BY 1",
+        &azResult, &nRow, 0, &zErrMsg
+      );
+    }else{
+      zShellStatic = azArg[1];
+      rc = sqlite3_get_table(p->db,
+        "SELECT name FROM sqlite_master "
+        "WHERE type IN ('table','view') AND name LIKE shellstatic() "
+        "UNION ALL "
+        "SELECT name FROM sqlite_temp_master "
+        "WHERE type IN ('table','view') AND name LIKE shellstatic() "
+        "ORDER BY 1",
+        &azResult, &nRow, 0, &zErrMsg
+      );
+      zShellStatic = 0;
+    }
+    if( zErrMsg ){
+      fprintf(stderr,"Error: %s\n", zErrMsg);
+      sqlite3_free(zErrMsg);
+      rc = 1;
+    }else if( rc != SQLITE_OK ){
+      fprintf(stderr,"Error: querying sqlite_master and sqlite_temp_master\n");
+      rc = 1;
+    }else{
+      int len, maxlen = 0;
+      int i, j;
+      int nPrintCol, nPrintRow;
+      for(i=1; i<=nRow; i++){
+        if( azResult[i]==0 ) continue;
+        len = strlen30(azResult[i]);
+        if( len>maxlen ) maxlen = len;
+      }
+      nPrintCol = 80/(maxlen+2);
+      if( nPrintCol<1 ) nPrintCol = 1;
+      nPrintRow = (nRow + nPrintCol - 1)/nPrintCol;
+      for(i=0; i<nPrintRow; i++){
+        for(j=i+1; j<=nRow; j+=nPrintRow){
+          char *zSp = j<=nPrintRow ? "" : "  ";
+          printf("%s%-*s", zSp, maxlen, azResult[j] ? azResult[j] : "");
+        }
+        printf("\n");
+      }
+    }
+    sqlite3_free_table(azResult);
+  }else
+
+  if( c=='t' && n>=8 && strncmp(azArg[0], "testctrl", n)==0 && nArg>=2 ){
+    static const struct {
+       const char *zCtrlName;   /* Name of a test-control option */
+       int ctrlCode;            /* Integer code for that option */
+    } aCtrl[] = {
+      { "prng_save",             SQLITE_TESTCTRL_PRNG_SAVE              },
+      { "prng_restore",          SQLITE_TESTCTRL_PRNG_RESTORE           },
+      { "prng_reset",            SQLITE_TESTCTRL_PRNG_RESET             },
+      { "bitvec_test",           SQLITE_TESTCTRL_BITVEC_TEST            },
+      { "fault_install",         SQLITE_TESTCTRL_FAULT_INSTALL          },
+      { "benign_malloc_hooks",   SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS    },
+      { "pending_byte",          SQLITE_TESTCTRL_PENDING_BYTE           },
+      { "assert",                SQLITE_TESTCTRL_ASSERT                 },
+      { "always",                SQLITE_TESTCTRL_ALWAYS                 },
+      { "reserve",               SQLITE_TESTCTRL_RESERVE                },
+      { "optimizations",         SQLITE_TESTCTRL_OPTIMIZATIONS          },
+      { "iskeyword",             SQLITE_TESTCTRL_ISKEYWORD              },
+      { "pghdrsz",               SQLITE_TESTCTRL_PGHDRSZ                },
+      { "scratchmalloc",         SQLITE_TESTCTRL_SCRATCHMALLOC          },
+    };
+    int testctrl = -1;
+    int rc = 0;
+    int i, n;
+    open_db(p);
+
+    /* convert testctrl text option to value. allow any unique prefix
+    ** of the option name, or a numerical value. */
+    n = strlen30(azArg[1]);
+    for(i=0; i<(int)(sizeof(aCtrl)/sizeof(aCtrl[0])); i++){
+      if( strncmp(azArg[1], aCtrl[i].zCtrlName, n)==0 ){
+        if( testctrl<0 ){
+          testctrl = aCtrl[i].ctrlCode;
+        }else{
+          fprintf(stderr, "ambiguous option name: \"%s\"\n", azArg[i]);
+          testctrl = -1;
+          break;
+        }
+      }
+    }
+    if( testctrl<0 ) testctrl = atoi(azArg[1]);
+    if( (testctrl<SQLITE_TESTCTRL_FIRST) || (testctrl>SQLITE_TESTCTRL_LAST) ){
+      fprintf(stderr,"Error: invalid testctrl option: %s\n", azArg[1]);
+    }else{
+      switch(testctrl){
+
+        /* sqlite3_test_control(int, db, int) */
+        case SQLITE_TESTCTRL_OPTIMIZATIONS:
+        case SQLITE_TESTCTRL_RESERVE:             
+          if( nArg==3 ){
+            int opt = (int)strtol(azArg[2], 0, 0);        
+            rc = sqlite3_test_control(testctrl, p->db, opt);
+            printf("%d (0x%08x)\n", rc, rc);
+          } else {
+            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
+                    azArg[1]);
+          }
+          break;
+
+        /* sqlite3_test_control(int) */
+        case SQLITE_TESTCTRL_PRNG_SAVE:           
+        case SQLITE_TESTCTRL_PRNG_RESTORE:        
+        case SQLITE_TESTCTRL_PRNG_RESET:
+        case SQLITE_TESTCTRL_PGHDRSZ:             
+          if( nArg==2 ){
+            rc = sqlite3_test_control(testctrl);
+            printf("%d (0x%08x)\n", rc, rc);
+          } else {
+            fprintf(stderr,"Error: testctrl %s takes no options\n", azArg[1]);
+          }
+          break;
+
+        /* sqlite3_test_control(int, uint) */
+        case SQLITE_TESTCTRL_PENDING_BYTE:        
+          if( nArg==3 ){
+            unsigned int opt = (unsigned int)atoi(azArg[2]);        
+            rc = sqlite3_test_control(testctrl, opt);
+            printf("%d (0x%08x)\n", rc, rc);
+          } else {
+            fprintf(stderr,"Error: testctrl %s takes a single unsigned"
+                           " int option\n", azArg[1]);
+          }
+          break;
+          
+        /* sqlite3_test_control(int, int) */
+        case SQLITE_TESTCTRL_ASSERT:              
+        case SQLITE_TESTCTRL_ALWAYS:              
+          if( nArg==3 ){
+            int opt = atoi(azArg[2]);        
+            rc = sqlite3_test_control(testctrl, opt);
+            printf("%d (0x%08x)\n", rc, rc);
+          } else {
+            fprintf(stderr,"Error: testctrl %s takes a single int option\n",
+                            azArg[1]);
+          }
+          break;
+
+        /* sqlite3_test_control(int, char *) */
+#ifdef SQLITE_N_KEYWORD
+        case SQLITE_TESTCTRL_ISKEYWORD:           
+          if( nArg==3 ){
+            const char *opt = azArg[2];        
+            rc = sqlite3_test_control(testctrl, opt);
+            printf("%d (0x%08x)\n", rc, rc);
+          } else {
+            fprintf(stderr,"Error: testctrl %s takes a single char * option\n",
+                            azArg[1]);
+          }
+          break;
+#endif
+
+        case SQLITE_TESTCTRL_BITVEC_TEST:         
+        case SQLITE_TESTCTRL_FAULT_INSTALL:       
+        case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: 
+        case SQLITE_TESTCTRL_SCRATCHMALLOC:       
+        default:
+          fprintf(stderr,"Error: CLI support for testctrl %s not implemented\n",
+                  azArg[1]);
+          break;
+      }
+    }
+  }else
+
+  if( c=='t' && n>4 && strncmp(azArg[0], "timeout", n)==0 && nArg==2 ){
+    open_db(p);
+    sqlite3_busy_timeout(p->db, atoi(azArg[1]));
+  }else
+    
+  if( HAS_TIMER && c=='t' && n>=5 && strncmp(azArg[0], "timer", n)==0
+   && nArg==2
+  ){
+    enableTimer = booleanValue(azArg[1]);
+  }else
+  
+  if( c=='v' && strncmp(azArg[0], "version", n)==0 ){
+    printf("SQLite %s %s\n",
+        sqlite3_libversion(), sqlite3_sourceid());
+  }else
+
+  if( c=='w' && strncmp(azArg[0], "width", n)==0 && nArg>1 ){
+    int j;
+    assert( nArg<=ArraySize(azArg) );
+    for(j=1; j<nArg && j<ArraySize(p->colWidth); j++){
+      p->colWidth[j-1] = atoi(azArg[j]);
+    }
+  }else
+
+  {
+    fprintf(stderr, "Error: unknown command or invalid arguments: "
+      " \"%s\". Enter \".help\" for help\n", azArg[0]);
+    rc = 1;
+  }
+
+  return rc;
+}
+
+/*
+** Return TRUE if a semicolon occurs anywhere in the first N characters
+** of string z[].
+*/
+static int _contains_semicolon(const char *z, int N){
+  int i;
+  for(i=0; i<N; i++){  if( z[i]==';' ) return 1; }
+  return 0;
+}
+
+/*
+** Test to see if a line consists entirely of whitespace.
+*/
+static int _all_whitespace(const char *z){
+  for(; *z; z++){
+    if( isspace(*(unsigned char*)z) ) continue;
+    if( *z=='/' && z[1]=='*' ){
+      z += 2;
+      while( *z && (*z!='*' || z[1]!='/') ){ z++; }
+      if( *z==0 ) return 0;
+      z++;
+      continue;
+    }
+    if( *z=='-' && z[1]=='-' ){
+      z += 2;
+      while( *z && *z!='\n' ){ z++; }
+      if( *z==0 ) return 1;
+      continue;
+    }
+    return 0;
+  }
+  return 1;
+}
+
+/*
+** Return TRUE if the line typed in is an SQL command terminator other
+** than a semi-colon.  The SQL Server style "go" command is understood
+** as is the Oracle "/".
+*/
+static int _is_command_terminator(const char *zLine){
+  while( isspace(*(unsigned char*)zLine) ){ zLine++; };
+  if( zLine[0]=='/' && _all_whitespace(&zLine[1]) ){
+    return 1;  /* Oracle */
+  }
+  if( tolower(zLine[0])=='g' && tolower(zLine[1])=='o'
+         && _all_whitespace(&zLine[2]) ){
+    return 1;  /* SQL Server */
+  }
+  return 0;
+}
+
+/*
+** Return true if zSql is a complete SQL statement.  Return false if it
+** ends in the middle of a string literal or C-style comment.
+*/
+static int _is_complete(char *zSql, int nSql){
+  int rc;
+  if( zSql==0 ) return 1;
+  zSql[nSql] = ';';
+  zSql[nSql+1] = 0;
+  rc = sqlite3_complete(zSql);
+  zSql[nSql] = 0;
+  return rc;
+}
+
+/*
+** Read input from *in and process it.  If *in==0 then input
+** is interactive - the user is typing it it.  Otherwise, input
+** is coming from a file or device.  A prompt is issued and history
+** is saved only if input is interactive.  An interrupt signal will
+** cause this routine to exit immediately, unless input is interactive.
+**
+** Return the number of errors.
+*/
+static int process_input(struct callback_data *p, FILE *in){
+  char *zLine = 0;
+  char *zSql = 0;
+  int nSql = 0;
+  int nSqlPrior = 0;
+  char *zErrMsg;
+  int rc;
+  int errCnt = 0;
+  int lineno = 0;
+  int startline = 0;
+
+  while( errCnt==0 || !bail_on_error || (in==0 && stdin_is_interactive) ){
+    fflush(p->out);
+    free(zLine);
+    zLine = one_input_line(zSql, in);
+    if( zLine==0 ){
+      break;  /* We have reached EOF */
+    }
+    if( seenInterrupt ){
+      if( in!=0 ) break;
+      seenInterrupt = 0;
+    }
+    lineno++;
+    if( (zSql==0 || zSql[0]==0) && _all_whitespace(zLine) ) continue;
+    if( zLine && zLine[0]=='.' && nSql==0 ){
+      if( p->echoOn ) printf("%s\n", zLine);
+      rc = do_meta_command(zLine, p);
+      if( rc==2 ){ /* exit requested */
+        break;
+      }else if( rc ){
+        errCnt++;
+      }
+      continue;
+    }
+    if( _is_command_terminator(zLine) && _is_complete(zSql, nSql) ){
+      memcpy(zLine,";",2);
+    }
+    nSqlPrior = nSql;
+    if( zSql==0 ){
+      int i;
+      for(i=0; zLine[i] && isspace((unsigned char)zLine[i]); i++){}
+      if( zLine[i]!=0 ){
+        nSql = strlen30(zLine);
+        zSql = malloc( nSql+3 );
+        if( zSql==0 ){
+          fprintf(stderr, "Error: out of memory\n");
+          exit(1);
+        }
+        memcpy(zSql, zLine, nSql+1);
+        startline = lineno;
+      }
+    }else{
+      int len = strlen30(zLine);
+      zSql = realloc( zSql, nSql + len + 4 );
+      if( zSql==0 ){
+        fprintf(stderr,"Error: out of memory\n");
+        exit(1);
+      }
+      zSql[nSql++] = '\n';
+      memcpy(&zSql[nSql], zLine, len+1);
+      nSql += len;
+    }
+    if( zSql && _contains_semicolon(&zSql[nSqlPrior], nSql-nSqlPrior)
+                && sqlite3_complete(zSql) ){
+      p->cnt = 0;
+      open_db(p);
+      BEGIN_TIMER;
+      rc = shell_exec(p->db, zSql, shell_callback, p, &zErrMsg);
+      END_TIMER;
+      if( rc || zErrMsg ){
+        char zPrefix[100];
+        if( in!=0 || !stdin_is_interactive ){
+          sqlite3_snprintf(sizeof(zPrefix), zPrefix, 
+                           "Error: near line %d:", startline);
+        }else{
+          sqlite3_snprintf(sizeof(zPrefix), zPrefix, "Error:");
+        }
+        if( zErrMsg!=0 ){
+          fprintf(stderr, "%s %s\n", zPrefix, zErrMsg);
+          sqlite3_free(zErrMsg);
+          zErrMsg = 0;
+        }else{
+          fprintf(stderr, "%s %s\n", zPrefix, sqlite3_errmsg(p->db));
+        }
+        errCnt++;
+      }
+      free(zSql);
+      zSql = 0;
+      nSql = 0;
+    }
+  }
+  if( zSql ){
+    if( !_all_whitespace(zSql) ){
+      fprintf(stderr, "Error: incomplete SQL: %s\n", zSql);
+    }
+    free(zSql);
+  }
+  free(zLine);
+  return errCnt;
+}
+
+/*
+** Return a pathname which is the user's home directory.  A
+** 0 return indicates an error of some kind.  Space to hold the
+** resulting string is obtained from malloc().  The calling
+** function should free the result.
+*/
+static char *find_home_dir(void){
+  char *home_dir = NULL;
+
+#if !defined(_WIN32) && !defined(WIN32) && !defined(__OS2__) && !defined(_WIN32_WCE) && !defined(__RTP__) && !defined(_WRS_KERNEL)
+  struct passwd *pwent;
+  uid_t uid = getuid();
+  if( (pwent=getpwuid(uid)) != NULL) {
+    home_dir = pwent->pw_dir;
+  }
+#endif
+
+#if defined(_WIN32_WCE)
+  /* Windows CE (arm-wince-mingw32ce-gcc) does not provide getenv()
+   */
+  home_dir = strdup("/");
+#else
+
+#if defined(_WIN32) || defined(WIN32) || defined(__OS2__)
+  if (!home_dir) {
+    home_dir = getenv("USERPROFILE");
+  }
+#endif
+
+  if (!home_dir) {
+    home_dir = getenv("HOME");
+  }
+
+#if defined(_WIN32) || defined(WIN32) || defined(__OS2__)
+  if (!home_dir) {
+    char *zDrive, *zPath;
+    int n;
+    zDrive = getenv("HOMEDRIVE");
+    zPath = getenv("HOMEPATH");
+    if( zDrive && zPath ){
+      n = strlen30(zDrive) + strlen30(zPath) + 1;
+      home_dir = malloc( n );
+      if( home_dir==0 ) return 0;
+      sqlite3_snprintf(n, home_dir, "%s%s", zDrive, zPath);
+      return home_dir;
+    }
+    home_dir = "c:\\";
+  }
+#endif
+
+#endif /* !_WIN32_WCE */
+
+  if( home_dir ){
+    int n = strlen30(home_dir) + 1;
+    char *z = malloc( n );
+    if( z ) memcpy(z, home_dir, n);
+    home_dir = z;
+  }
+
+  return home_dir;
+}
+
+/*
+** Read input from the file given by sqliterc_override.  Or if that
+** parameter is NULL, take input from ~/.sqliterc
+**
+** Returns the number of errors.
+*/
+static int process_sqliterc(
+  struct callback_data *p,        /* Configuration data */
+  const char *sqliterc_override   /* Name of config file. NULL to use default */
+){
+  char *home_dir = NULL;
+  const char *sqliterc = sqliterc_override;
+  char *zBuf = 0;
+  FILE *in = NULL;
+  int nBuf;
+  int rc = 0;
+
+  if (sqliterc == NULL) {
+    home_dir = find_home_dir();
+    if( home_dir==0 ){
+#if !defined(__RTP__) && !defined(_WRS_KERNEL)
+      fprintf(stderr,"%s: Error: cannot locate your home directory\n", Argv0);
+#endif
+      return 1;
+    }
+    nBuf = strlen30(home_dir) + 16;
+    zBuf = malloc( nBuf );
+    if( zBuf==0 ){
+      fprintf(stderr,"%s: Error: out of memory\n",Argv0);
+      return 1;
+    }
+    sqlite3_snprintf(nBuf, zBuf,"%s/.sqliterc",home_dir);
+    free(home_dir);
+    sqliterc = (const char*)zBuf;
+  }
+  in = fopen(sqliterc,"rb");
+  if( in ){
+    if( stdin_is_interactive ){
+      fprintf(stderr,"-- Loading resources from %s\n",sqliterc);
+    }
+    rc = process_input(p,in);
+    fclose(in);
+  }
+  free(zBuf);
+  return rc;
+}
+
+/*
+** Show available command line options
+*/
+static const char zOptions[] = 
+  "   -help                show this message\n"
+  "   -init filename       read/process named file\n"
+  "   -echo                print commands before execution\n"
+  "   -[no]header          turn headers on or off\n"
+  "   -bail                stop after hitting an error\n"
+  "   -interactive         force interactive I/O\n"
+  "   -batch               force batch I/O\n"
+  "   -column              set output mode to 'column'\n"
+  "   -csv                 set output mode to 'csv'\n"
+  "   -html                set output mode to HTML\n"
+  "   -line                set output mode to 'line'\n"
+  "   -list                set output mode to 'list'\n"
+  "   -separator 'x'       set output field separator (|)\n"
+  "   -stats               print memory stats before each finalize\n"
+  "   -nullvalue 'text'    set text string for NULL values\n"
+  "   -version             show SQLite version\n"
+  "   -vfs NAME            use NAME as the default VFS\n"
+#ifdef SQLITE_ENABLE_VFSTRACE
+  "   -vfstrace            enable tracing of all VFS calls\n"
+#endif
+#ifdef SQLITE_ENABLE_MULTIPLEX
+  "   -multiplex           enable the multiplexor VFS\n"
+#endif
+;
+static void usage(int showDetail){
+  fprintf(stderr,
+      "Usage: %s [OPTIONS] FILENAME [SQL]\n"  
+      "FILENAME is the name of an SQLite database. A new database is created\n"
+      "if the file does not previously exist.\n", Argv0);
+  if( showDetail ){
+    fprintf(stderr, "OPTIONS include:\n%s", zOptions);
+  }else{
+    fprintf(stderr, "Use the -help option for additional information\n");
+  }
+  exit(1);
+}
+
+/*
+** Initialize the state information in data
+*/
+static void main_init(struct callback_data *data) {
+  memset(data, 0, sizeof(*data));
+  data->mode = MODE_List;
+  memcpy(data->separator,"|", 2);
+  data->showHeader = 0;
+  sqlite3_config(SQLITE_CONFIG_URI, 1);
+  sqlite3_config(SQLITE_CONFIG_LOG, shellLog, data);
+  sqlite3_snprintf(sizeof(mainPrompt), mainPrompt,"sqlite> ");
+  sqlite3_snprintf(sizeof(continuePrompt), continuePrompt,"   ...> ");
+  sqlite3_config(SQLITE_CONFIG_SINGLETHREAD);
+}
+
+int main(int argc, char **argv){
+  char *zErrMsg = 0;
+  struct callback_data data;
+  const char *zInitFile = 0;
+  char *zFirstCmd = 0;
+  int i;
+  int rc = 0;
+
+  if( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)!=0 ){
+    fprintf(stderr, "SQLite header and source version mismatch\n%s\n%s\n",
+            sqlite3_sourceid(), SQLITE_SOURCE_ID);
+    exit(1);
+  }
+  Argv0 = argv[0];
+  main_init(&data);
+  stdin_is_interactive = isatty(0);
+
+  /* Make sure we have a valid signal handler early, before anything
+  ** else is done.
+  */
+#ifdef SIGINT
+  signal(SIGINT, interrupt_handler);
+#endif
+
+  /* Do an initial pass through the command-line argument to locate
+  ** the name of the database file, the name of the initialization file,
+  ** the size of the alternative malloc heap,
+  ** and the first command to execute.
+  */
+  for(i=1; i<argc-1; i++){
+    char *z;
+    if( argv[i][0]!='-' ) break;
+    z = argv[i];
+    if( z[0]=='-' && z[1]=='-' ) z++;
+    if( strcmp(argv[i],"-separator")==0 || strcmp(argv[i],"-nullvalue")==0 ){
+      i++;
+    }else if( strcmp(argv[i],"-init")==0 ){
+      i++;
+      zInitFile = argv[i];
+    /* Need to check for batch mode here to so we can avoid printing
+    ** informational messages (like from process_sqliterc) before 
+    ** we do the actual processing of arguments later in a second pass.
+    */
+    }else if( strcmp(argv[i],"-batch")==0 ){
+      stdin_is_interactive = 0;
+    }else if( strcmp(argv[i],"-heap")==0 ){
+      int j, c;
+      const char *zSize;
+      sqlite3_int64 szHeap;
+
+      zSize = argv[++i];
+      szHeap = atoi(zSize);
+      for(j=0; (c = zSize[j])!=0; j++){
+        if( c=='M' ){ szHeap *= 1000000; break; }
+        if( c=='K' ){ szHeap *= 1000; break; }
+        if( c=='G' ){ szHeap *= 1000000000; break; }
+      }
+      if( szHeap>0x7fff0000 ) szHeap = 0x7fff0000;
+#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
+      sqlite3_config(SQLITE_CONFIG_HEAP, malloc((int)szHeap), (int)szHeap, 64);
+#endif
+#ifdef SQLITE_ENABLE_VFSTRACE
+    }else if( strcmp(argv[i],"-vfstrace")==0 ){
+      extern int vfstrace_register(
+         const char *zTraceName,
+         const char *zOldVfsName,
+         int (*xOut)(const char*,void*),
+         void *pOutArg,
+         int makeDefault
+      );
+      vfstrace_register("trace",0,(int(*)(const char*,void*))fputs,stderr,1);
+#endif
+#ifdef SQLITE_ENABLE_MULTIPLEX
+    }else if( strcmp(argv[i],"-multiplex")==0 ){
+      extern int sqlite3_multiple_initialize(const char*,int);
+      sqlite3_multiplex_initialize(0, 1);
+#endif
+    }else if( strcmp(argv[i],"-vfs")==0 ){
+      sqlite3_vfs *pVfs = sqlite3_vfs_find(argv[++i]);
+      if( pVfs ){
+        sqlite3_vfs_register(pVfs, 1);
+      }else{
+        fprintf(stderr, "no such VFS: \"%s\"\n", argv[i]);
+        exit(1);
+      }
+    }
+  }
+  if( i<argc ){
+#if defined(SQLITE_OS_OS2) && SQLITE_OS_OS2
+    data.zDbFilename = (const char *)convertCpPathToUtf8( argv[i++] );
+#else
+    data.zDbFilename = argv[i++];
+#endif
+  }else{
+#ifndef SQLITE_OMIT_MEMORYDB
+    data.zDbFilename = ":memory:";
+#else
+    data.zDbFilename = 0;
+#endif
+  }
+  if( i<argc ){
+    zFirstCmd = argv[i++];
+  }
+  if( i<argc ){
+    fprintf(stderr,"%s: Error: too many options: \"%s\"\n", Argv0, argv[i]);
+    fprintf(stderr,"Use -help for a list of options.\n");
+    return 1;
+  }
+  data.out = stdout;
+
+#ifdef SQLITE_OMIT_MEMORYDB
+  if( data.zDbFilename==0 ){
+    fprintf(stderr,"%s: Error: no database filename specified\n", Argv0);
+    return 1;
+  }
+#endif
+
+  /* Go ahead and open the database file if it already exists.  If the
+  ** file does not exist, delay opening it.  This prevents empty database
+  ** files from being created if a user mistypes the database name argument
+  ** to the sqlite command-line tool.
+  */
+  if( access(data.zDbFilename, 0)==0 ){
+    open_db(&data);
+  }
+
+  /* Process the initialization file if there is one.  If no -init option
+  ** is given on the command line, look for a file named ~/.sqliterc and
+  ** try to process it.
+  */
+  rc = process_sqliterc(&data,zInitFile);
+  if( rc>0 ){
+    return rc;
+  }
+
+  /* Make a second pass through the command-line argument and set
+  ** options.  This second pass is delayed until after the initialization
+  ** file is processed so that the command-line arguments will override
+  ** settings in the initialization file.
+  */
+  for(i=1; i<argc && argv[i][0]=='-'; i++){
+    char *z = argv[i];
+    if( z[1]=='-' ){ z++; }
+    if( strcmp(z,"-init")==0 ){
+      i++;
+    }else if( strcmp(z,"-html")==0 ){
+      data.mode = MODE_Html;
+    }else if( strcmp(z,"-list")==0 ){
+      data.mode = MODE_List;
+    }else if( strcmp(z,"-line")==0 ){
+      data.mode = MODE_Line;
+    }else if( strcmp(z,"-column")==0 ){
+      data.mode = MODE_Column;
+    }else if( strcmp(z,"-csv")==0 ){
+      data.mode = MODE_Csv;
+      memcpy(data.separator,",",2);
+    }else if( strcmp(z,"-separator")==0 ){
+      i++;
+      if(i>=argc){
+        fprintf(stderr,"%s: Error: missing argument for option: %s\n", Argv0, z);
+        fprintf(stderr,"Use -help for a list of options.\n");
+        return 1;
+      }
+      sqlite3_snprintf(sizeof(data.separator), data.separator,
+                       "%.*s",(int)sizeof(data.separator)-1,argv[i]);
+    }else if( strcmp(z,"-nullvalue")==0 ){
+      i++;
+      if(i>=argc){
+        fprintf(stderr,"%s: Error: missing argument for option: %s\n", Argv0, z);
+        fprintf(stderr,"Use -help for a list of options.\n");
+        return 1;
+      }
+      sqlite3_snprintf(sizeof(data.nullvalue), data.nullvalue,
+                       "%.*s",(int)sizeof(data.nullvalue)-1,argv[i]);
+    }else if( strcmp(z,"-header")==0 ){
+      data.showHeader = 1;
+    }else if( strcmp(z,"-noheader")==0 ){
+      data.showHeader = 0;
+    }else if( strcmp(z,"-echo")==0 ){
+      data.echoOn = 1;
+    }else if( strcmp(z,"-stats")==0 ){
+      data.statsOn = 1;
+    }else if( strcmp(z,"-bail")==0 ){
+      bail_on_error = 1;
+    }else if( strcmp(z,"-version")==0 ){
+      printf("%s %s\n", sqlite3_libversion(), sqlite3_sourceid());
+      return 0;
+    }else if( strcmp(z,"-interactive")==0 ){
+      stdin_is_interactive = 1;
+    }else if( strcmp(z,"-batch")==0 ){
+      stdin_is_interactive = 0;
+    }else if( strcmp(z,"-heap")==0 ){
+      i++;
+    }else if( strcmp(z,"-vfs")==0 ){
+      i++;
+#ifdef SQLITE_ENABLE_VFSTRACE
+    }else if( strcmp(z,"-vfstrace")==0 ){
+      i++;
+#endif
+#ifdef SQLITE_ENABLE_MULTIPLEX
+    }else if( strcmp(z,"-multiplex")==0 ){
+      i++;
+#endif
+    }else if( strcmp(z,"-help")==0 || strcmp(z, "--help")==0 ){
+      usage(1);
+    }else{
+      fprintf(stderr,"%s: Error: unknown option: %s\n", Argv0, z);
+      fprintf(stderr,"Use -help for a list of options.\n");
+      return 1;
+    }
+  }
+
+  if( zFirstCmd ){
+    /* Run just the command that follows the database name
+    */
+    if( zFirstCmd[0]=='.' ){
+      rc = do_meta_command(zFirstCmd, &data);
+    }else{
+      open_db(&data);
+      rc = shell_exec(data.db, zFirstCmd, shell_callback, &data, &zErrMsg);
+      if( zErrMsg!=0 ){
+        fprintf(stderr,"Error: %s\n", zErrMsg);
+        return rc!=0 ? rc : 1;
+      }else if( rc!=0 ){
+        fprintf(stderr,"Error: unable to process SQL \"%s\"\n", zFirstCmd);
+        return rc;
+      }
+    }
+  }else{
+    /* Run commands received from standard input
+    */
+    if( stdin_is_interactive ){
+      char *zHome;
+      char *zHistory = 0;
+      int nHistory;
+      printf(
+        "SQLite version %s %.19s\n"
+        "Enter \".help\" for instructions\n"
+        "Enter SQL statements terminated with a \";\"\n",
+        sqlite3_libversion(), sqlite3_sourceid()
+      );
+      zHome = find_home_dir();
+      if( zHome ){
+        nHistory = strlen30(zHome) + 20;
+        if( (zHistory = malloc(nHistory))!=0 ){
+          sqlite3_snprintf(nHistory, zHistory,"%s/.sqlite_history", zHome);
+        }
+      }
+#if defined(HAVE_READLINE) && HAVE_READLINE==1
+      if( zHistory ) read_history(zHistory);
+#endif
+      rc = process_input(&data, 0);
+      if( zHistory ){
+        stifle_history(100);
+        write_history(zHistory);
+        free(zHistory);
+      }
+      free(zHome);
+    }else{
+      rc = process_input(&data, stdin);
+    }
+  }
+  set_table_name(&data, 0);
+  if( data.db ){
+    sqlite3_close(data.db);
+  }
+  return rc;
+}

deps/sqlite3/sqlite3.1

+.\"                                      Hey, EMACS: -*- nroff -*-
+.\" First parameter, NAME, should be all caps
+.\" Second parameter, SECTION, should be 1-8, maybe w/ subsection
+.\" other parameters are allowed: see man(7), man(1)
+.TH SQLITE3 1 "Mon Apr 15 23:49:17 2002"
+.\" Please adjust this date whenever revising the manpage.
+.\"
+.\" Some roff macros, for reference:
+.\" .nh        disable hyphenation
+.\" .hy        enable hyphenation
+.\" .ad l      left justify
+.\" .ad b      justify to both left and right margins
+.\" .nf        disable filling
+.\" .fi        enable filling
+.\" .br        insert line break
+.\" .sp <n>    insert n+1 empty lines
+.\" for manpage-specific macros, see man(7)
+.SH NAME
+.B sqlite3 
+\- A command line interface for SQLite version 3
+
+.SH SYNOPSIS
+.B sqlite3
+.RI [ options ]
+.RI [ databasefile ]
+.RI [ SQL ]
+
+.SH SUMMARY
+.PP
+.B sqlite3
+is a terminal-based front-end to the SQLite library that can evaluate
+queries interactively and display the results in multiple formats.
+.B sqlite3
+can also be used within shell scripts and other applications to provide
+batch processing features.
+
+.SH DESCRIPTION
+To start a
+.B sqlite3
+interactive session, invoke the
+.B sqlite3
+command and optionally provide the name of a database file.  If the
+database file does not exist, it will be created.  If the database file
+does exist, it will be opened.
+
+For example, to create a new database file named "mydata.db", create
+a table named "memos" and insert a couple of records into that table:
+.sp
+$ 
+.B sqlite3 mydata.db
+.br
+SQLite version 3.1.3
+.br
+Enter ".help" for instructions
+.br
+sqlite>
+.B create table memos(text, priority INTEGER);
+.br
+sqlite>
+.B insert into memos values('deliver project description', 10);
+.br
+sqlite>
+.B insert into memos values('lunch with Christine', 100);
+.br
+sqlite>
+.B select * from memos;
+.br
+deliver project description|10
+.br
+lunch with Christine|100
+.br
+sqlite>
+.sp
+
+If no database name is supplied, the ATTACH sql command can be used
+to attach to existing or create new database files.  ATTACH can also
+be used to attach to multiple databases within the same interactive
+session.  This is useful for migrating data between databases,
+possibly changing the schema along the way.
+
+Optionally, a SQL statement or set of SQL statements can be supplied as
+a single argument.  Multiple statements should be separated by
+semi-colons.
+
+For example:
+.sp
+$ 
+.B sqlite3 -line mydata.db 'select * from memos where priority > 20;'
+.br
+    text = lunch with Christine
+.br
+priority = 100
+.br
+.sp
+
+.SS SQLITE META-COMMANDS
+.PP
+The interactive interpreter offers a set of meta-commands that can be
+used to control the output format, examine the currently attached
+database files, or perform administrative operations upon the
+attached databases (such as rebuilding indices).   Meta-commands are
+always prefixed with a dot (.).
+
+A list of available meta-commands can be viewed at any time by issuing
+the '.help' command.  For example:
+.sp
+sqlite>
+.B .help
+.nf
+.cc |
+.databases             List names and files of attached databases
+.dump ?TABLE? ...      Dump the database in an SQL text format
+.echo ON|OFF           Turn command echo on or off
+.exit                  Exit this program
+.explain ON|OFF        Turn output mode suitable for EXPLAIN on or off.
+.header(s) ON|OFF      Turn display of headers on or off
+.help                  Show this message
+.import FILE TABLE     Import data from FILE into TABLE
+.indices TABLE         Show names of all indices on TABLE
+.mode MODE ?TABLE?     Set output mode where MODE is one of:
+                         csv      Comma-separated values
+                         column   Left-aligned columns.  (See .width)
+                         html     HTML <table> code
+                         insert   SQL insert statements for TABLE
+                         line     One value per line
+                         list     Values delimited by .separator string
+                         tabs     Tab-separated values
+                         tcl      TCL list elements
+.nullvalue STRING      Print STRING in place of NULL values
+.output FILENAME       Send output to FILENAME
+.output stdout         Send output to the screen
+.prompt MAIN CONTINUE  Replace the standard prompts
+.quit                  Exit this program
+.read FILENAME         Execute SQL in FILENAME
+.schema ?TABLE?        Show the CREATE statements
+.separator STRING      Change separator used by output mode and .import
+.show                  Show the current values for various settings
+.tables ?PATTERN?      List names of tables matching a LIKE pattern
+.timeout MS            Try opening locked tables for MS milliseconds
+.width NUM NUM ...     Set column widths for "column" mode
+sqlite>
+|cc .
+.sp
+.fi
+
+.SH OPTIONS
+.B sqlite3
+has the following options:
+.TP
+.BI \-init\ file
+Read and execute commands from
+.I file
+, which can contain a mix of SQL statements and meta-commands.
+.TP
+.B \-echo
+Print commands before execution.
+.TP
+.B \-[no]header
+Turn headers on or off.
+.TP
+.B \-column
+Query results will be displayed in a table like form, using
+whitespace characters to separate the columns and align the
+output.
+.TP
+.B \-html
+Query results will be output as simple HTML tables.
+.TP
+.B \-line
+Query results will be displayed with one value per line, rows
+separated by a blank line.  Designed to be easily parsed by
+scripts or other programs
+.TP
+.B \-list
+Query results will be displayed with the separator (|, by default)
+character between each field value.  The default.
+.TP
+.BI \-separator\  separator
+Set output field separator.  Default is '|'.
+.TP
+.BI \-nullvalue\  string
+Set string used to represent NULL values.  Default is ''
+(empty string).
+.TP
+.B \-version
+Show SQLite version.
+.TP
+.B \-help
+Show help on options and exit.
+
+
+.SH INIT FILE
+.B sqlite3
+reads an initialization file to set the configuration of the
+interactive environment.  Throughout initialization, any previously
+specified setting can be overridden.  The sequence of initialization is
+as follows:
+
+o The default configuration is established as follows:
+
+.sp
+.nf
+.cc |
+mode            = LIST
+separator       = "|"
+main prompt     = "sqlite> "
+continue prompt = "   ...> "
+|cc .
+.sp
+.fi
+
+o If the file 
+.B ~/.sqliterc
+exists, it is processed first.
+can be found in the user's home directory, it is
+read and processed.  It should generally only contain meta-commands.
+
+o If the -init option is present, the specified file is processed.
+
+o All other command line options are processed.
+
+.SH SEE ALSO
+http://www.sqlite.org/
+.br
+The sqlite-doc package
+.SH AUTHOR
+This manual page was originally written by Andreas Rottmann
+<rotty@debian.org>, for the Debian GNU/Linux system (but may be used
+by others).   It was subsequently revised by Bill Bumgarner <bbum@mac.com>.

deps/sqlite3/sqlite3.pc

+# Package Information for pkg-config
+
+prefix=/usr/local
+exec_prefix=${prefix}
+libdir=${exec_prefix}/lib
+includedir=${prefix}/include
+
+Name: SQLite
+Description: SQL database engine
+Version: 3.7.8
+Libs: -L${libdir} -lsqlite3
+Libs.private: -ldl -lpthread 
+Cflags: -I${includedir}

deps/sqlite3/sqlite3.pc.in

+# Package Information for pkg-config
+
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: SQLite
+Description: SQL database engine
+Version: @PACKAGE_VERSION@
+Libs: -L${libdir} -lsqlite3
+Libs.private: @LIBS@
+Cflags: -I${includedir}

deps/sqlite3/sqlite3ext.h

+/*
+** 2006 June 7
+**
+** The author disclaims copyright to this source code.  In place of
+** a legal notice, here is a blessing:
+**
+**    May you do good and not evil.
+**    May you find forgiveness for yourself and forgive others.
+**    May you share freely, never taking more than you give.
+**
+*************************************************************************
+** This header file defines the SQLite interface for use by
+** shared libraries that want to be imported as extensions into
+** an SQLite instance.  Shared libraries that intend to be loaded
+** as extensions by SQLite should #include this file instead of 
+** sqlite3.h.
+*/
+#ifndef _SQLITE3EXT_H_
+#define _SQLITE3EXT_H_
+#include "sqlite3.h"
+
+typedef struct sqlite3_api_routines sqlite3_api_routines;
+
+/*
+** The following structure holds pointers to all of the SQLite API
+** routines.
+**
+** WARNING:  In order to maintain backwards compatibility, add new
+** interfaces to the end of this structure only.  If you insert new
+** interfaces in the middle of this structure, then older different
+** versions of SQLite will not be able to load each others' shared
+** libraries!
+*/
+struct sqlite3_api_routines {
+  void * (*aggregate_context)(sqlite3_context*,int nBytes);
+  int  (*aggregate_count)(sqlite3_context*);
+  int  (*bind_blob)(sqlite3_stmt*,int,const void*,int n,void(*)(void*));
+  int  (*bind_double)(sqlite3_stmt*,int,double);
+  int  (*bind_int)(sqlite3_stmt*,int,int);
+  int  (*bind_int64)(sqlite3_stmt*,int,sqlite_int64);
+  int  (*bind_null)(sqlite3_stmt*,int);
+  int  (*bind_parameter_count)(sqlite3_stmt*);
+  int  (*bind_parameter_index)(sqlite3_stmt*,const char*zName);
+  const char * (*bind_parameter_name)(sqlite3_stmt*,int);
+  int  (*bind_text)(sqlite3_stmt*,int,const char*,int n,void(*)(void*));
+  int  (*bind_text16)(sqlite3_stmt*,int,const void*,int,void(*)(void*));
+  int  (*bind_value)(sqlite3_stmt*,int,const sqlite3_value*);
+  int  (*busy_handler)(sqlite3*,int(*)(void*,int),void*);
+  int  (*busy_timeout)(sqlite3*,int ms);
+  int  (*changes)(sqlite3*);
+  int  (*close)(sqlite3*);
+  int  (*collation_needed)(sqlite3*,void*,void(*)(void*,sqlite3*,int eTextRep,const char*));
+  int  (*collation_needed16)(sqlite3*,void*,void(*)(void*,sqlite3*,int eTextRep,const void*));
+  const void * (*column_blob)(sqlite3_stmt*,int iCol);
+  int  (*column_bytes)(sqlite3_stmt*,int iCol);
+  int  (*column_bytes16)(sqlite3_stmt*,int iCol);
+  int  (*column_count)(sqlite3_stmt*pStmt);
+  const char * (*column_database_name)(sqlite3_stmt*,int);
+  const void * (*column_database_name16)(sqlite3_stmt*,int);
+  const char * (*column_decltype)(sqlite3_stmt*,int i);
+  const void * (*column_decltype16)(sqlite3_stmt*,int);
+  double  (*column_double)(sqlite3_stmt*,int iCol);
+  int  (*column_int)(sqlite3_stmt*,int iCol);
+  sqlite_int64  (*column_int64)(sqlite3_stmt*,int iCol);
+  const char * (*column_name)(sqlite3_stmt*,int);
+  const void * (*column_name16)(sqlite3_stmt*,int);
+  const char * (*column_origin_name)(sqlite3_stmt*,int);
+  const void * (*column_origin_name16)(sqlite3_stmt*,int);
+  const char * (*column_table_name)(sqlite3_stmt*,int);
+  const void * (*column_table_name16)(sqlite3_stmt*,int);
+  const unsigned char * (*column_text)(sqlite3_stmt*,int iCol);
+  const void * (*column_text16)(sqlite3_stmt*,int iCol);
+  int  (*column_type)(sqlite3_stmt*,int iCol);
+  sqlite3_value* (*column_value)(sqlite3_stmt*,int iCol);
+  void * (*commit_hook)(sqlite3*,int(*)(void*),void*);
+  int  (*complete)(const char*sql);
+  int  (*complete16)(const void*sql);
+  int  (*create_collation)(sqlite3*,const char*,int,void*,int(*)(void*,int,const void*,int,const void*));
+  int  (*create_collation16)(sqlite3*,const void*,int,void*,int(*)(void*,int,const void*,int,const void*));
+  int  (*create_function)(sqlite3*,const char*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*));
+  int  (*create_function16)(sqlite3*,const void*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*));
+  int (*create_module)(sqlite3*,const char*,const sqlite3_module*,void*);
+  int  (*data_count)(sqlite3_stmt*pStmt);
+  sqlite3 * (*db_handle)(sqlite3_stmt*);
+  int (*declare_vtab)(sqlite3*,const char*);
+  int  (*enable_shared_cache)(int);
+  int  (*errcode)(sqlite3*db);
+  const char * (*errmsg)(sqlite3*);
+  const void * (*errmsg16)(sqlite3*);
+  int  (*exec)(sqlite3*,const char*,sqlite3_callback,void*,char**);
+  int  (*expired)(sqlite3_stmt*);
+  int  (*finalize)(sqlite3_stmt*pStmt);
+  void  (*free)(void*);
+  void  (*free_table)(char**result);
+  int  (*get_autocommit)(sqlite3*);
+  void * (*get_auxdata)(sqlite3_context*,int);
+  int  (*get_table)(sqlite3*,const char*,char***,int*,int*,char**);
+  int  (*global_recover)(void);
+  void  (*interruptx)(sqlite3*);
+  sqlite_int64  (*last_insert_rowid)(sqlite3*);
+  const char * (*libversion)(void);
+  int  (*libversion_number)(void);
+  void *(*malloc)(int);
+  char * (*mprintf)(const char*,...);
+  int  (*open)(const char*,sqlite3**);
+  int  (*open16)(const void*,sqlite3**);
+  int  (*prepare)(sqlite3*,const char*,int,sqlite3_stmt**,const char**);
+  int  (*prepare16)(sqlite3*,const void*,int,sqlite3_stmt**,const void**);
+  void * (*profile)(sqlite3*,void(*)(void*,const char*,sqlite_uint64),void*);
+  void  (*progress_handler)(sqlite3*,int,int(*)(void*),void*);
+  void *(*realloc)(void*,int);
+  int  (*reset)(sqlite3_stmt*pStmt);
+  void  (*result_blob)(sqlite3_context*,const void*,int,void(*)(void*));
+  void  (*result_double)(sqlite3_context*,double);
+  void  (*result_error)(sqlite3_context*,const char*,int);
+  void  (*result_error16)(sqlite3_context*,const void*,int);
+  void  (*result_int)(sqlite3_context*,int);
+  void  (*result_int64)(sqlite3_context*,sqlite_int64);
+  void  (*result_null)(sqlite3_context*);
+  void  (*result_text)(sqlite3_context*,const char*,int,void(*)(void*));
+  void  (*result_text16)(sqlite3_context*,const void*,int,void(*)(void*));
+  void  (*result_text16be)(sqlite3_context*,const void*,int,void(*)(void*));
+  void  (*result_text16le)(sqlite3_context*,const void*,int,void(*)(void*));
+  void  (*result_value)(sqlite3_context*,sqlite3_value*);
+  void * (*rollback_hook)(sqlite3*,void(*)(void*),void*);
+  int  (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*,const char*,const char*),void*);
+  void  (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*));
+  char * (*snprintf)(int,char*,const char*,...);
+  int  (*step)(sqlite3_stmt*);
+  int  (*table_column_metadata)(sqlite3*,const char*,const char*,const char*,char const**,char const**,int*,int*,int*);
+  void  (*thread_cleanup)(void);
+  int  (*total_changes)(sqlite3*);
+  void * (*trace)(sqlite3*,void(*xTrace)(void*,const char*),void*);
+  int  (*transfer_bindings)(sqlite3_stmt*,sqlite3_stmt*);
+  void * (*update_hook)(sqlite3*,void(*)(void*,int ,char const*,char const*,sqlite_int64),void*);
+  void * (*user_data)(sqlite3_context*);
+  const void * (*value_blob)(sqlite3_value*);
+  int  (*value_bytes)(sqlite3_value*);
+  int  (*value_bytes16)(sqlite3_value*);
+  double  (*value_double)(sqlite3_value*);
+  int  (*value_int)(sqlite3_value*);
+  sqlite_int64  (*value_int64)(sqlite3_value*);
+  int  (*value_numeric_type)(sqlite3_value*);
+  const unsigned char * (*value_text)(sqlite3_value*);
+  const void * (*value_text16)(sqlite3_value*);
+  const void * (*value_text16be)(sqlite3_value*);
+  const void * (*value_text16le)(sqlite3_value*);
+  int  (*value_type)(sqlite3_value*);
+  char *(*vmprintf)(const char*,va_list);
+  /* Added ??? */
+  int (*overload_function)(sqlite3*, const char *zFuncName, int nArg);
+  /* Added by 3.3.13 */
+  int (*prepare_v2)(sqlite3*,const char*,int,sqlite3_stmt**,const char**);
+  int (*prepare16_v2)(sqlite3*,const void*,int,sqlite3_stmt**,const void**);
+  int (*clear_bindings)(sqlite3_stmt*);
+  /* Added by 3.4.1 */
+  int (*create_module_v2)(sqlite3*,const char*,const sqlite3_module*,void*,void (*xDestroy)(void *));
+  /* Added by 3.5.0 */
+  int (*bind_zeroblob)(sqlite3_stmt*,int,int);
+  int (*blob_bytes)(sqlite3_blob*);
+  int (*blob_close)(sqlite3_blob*);
+  int (*blob_open)(sqlite3*,const char*,const char*,const char*,sqlite3_int64,int,sqlite3_blob**);
+  int (*blob_read)(sqlite3_blob*,void*,int,int);
+  int (*blob_write)(sqlite3_blob*,const void*,int,int);
+  int (*create_collation_v2)(sqlite3*,const char*,int,void*,int(*)(void*,int,const void*,int,const void*),void(*)(void*));
+  int (*file_control)(sqlite3*,const char*,int,void*);
+  sqlite3_int64 (*memory_highwater)(int);
+  sqlite3_int64 (*memory_used)(void);
+  sqlite3_mutex *(*mutex_alloc)(int);
+  void (*mutex_enter)(sqlite3_mutex*);
+  void (*mutex_free)(sqlite3_mutex*);
+  void (*mutex_leave)(sqlite3_mutex*);
+  int (*mutex_try)(sqlite3_mutex*);
+  int (*open_v2)(const char*,sqlite3**,int,const char*);
+  int (*release_memory)(int);
+  void (*result_error_nomem)(sqlite3_context*);
+  void (*result_error_toobig)(sqlite3_context*);
+  int (*sleep)(int);
+  void (*soft_heap_limit)(int);
+  sqlite3_vfs *(*vfs_find)(const char*);
+  int (*vfs_register)(sqlite3_vfs*,int);
+  int (*vfs_unregister)(sqlite3_vfs*);
+  int (*xthreadsafe)(void);
+  void (*result_zeroblob)(sqlite3_context*,int);
+  void (*result_error_code)(sqlite3_context*,int);
+  int (*test_control)(int, ...);
+  void (*randomness)(int,void*);
+  sqlite3 *(*context_db_handle)(sqlite3_context*);
+  int (*extended_result_codes)(sqlite3*,int);
+  int (*limit)(sqlite3*,int,int);
+  sqlite3_stmt *(*next_stmt)(sqlite3*,sqlite3_stmt*);
+  const char *(*sql)(sqlite3_stmt*);
+  int (*status)(int,int*,int*,int);
+  int (*backup_finish)(sqlite3_backup*);
+  sqlite3_backup *(*backup_init)(sqlite3*,const char*,sqlite3*,const char*);
+  int (*backup_pagecount)(sqlite3_backup*);
+  int (*backup_remaining)(sqlite3_backup*);
+  int (*backup_step)(sqlite3_backup*,int);
+  const char *(*compileoption_get)(int);
+  int (*compileoption_used)(const char*);
+  int (*create_function_v2)(sqlite3*,const char*,int,int,void*,void (*xFunc)(sqlite3_context*,int,sqlite3_value**),void (*xStep)(sqlite3_context*,int,sqlite3_value**),void (*xFinal)(sqlite3_context*),void(*xDestroy)(void*));
+  int (*db_config)(sqlite3*,int,...);
+  sqlite3_mutex *(*db_mutex)(sqlite3*);
+  int (*db_status)(sqlite3*,int,int*,int*,int);
+  int (*extended_errcode)(sqlite3*);
+  void (*log)(int,const char*,...);
+  sqlite3_int64 (*soft_heap_limit64)(sqlite3_int64);
+  const char *(*sourceid)(void);
+  int (*stmt_status)(sqlite3_stmt*,int,int);
+  int (*strnicmp)(const char*,const char*,int);
+  int (*unlock_notify)(sqlite3*,void(*)(void**,int),void*);
+  int (*wal_autocheckpoint)(sqlite3*,int);
+  int (*wal_checkpoint)(sqlite3*,const char*);
+  void *(*wal_hook)(sqlite3*,int(*)(void*,sqlite3*,const char*,int),void*);
+  int (*blob_reopen)(sqlite3_blob*,sqlite3_int64);
+  int (*vtab_config)(sqlite3*,int op,...);
+  int (*vtab_on_conflict)(sqlite3*);
+};
+
+/*
+** The following macros redefine the API routines so that they are
+** redirected throught the global sqlite3_api structure.
+**
+** This header file is also used by the loadext.c source file
+** (part of the main SQLite library - not an extension) so that
+** it can get access to the sqlite3_api_routines structure
+** definition.  But the main library does not want to redefine
+** the API.  So the redefinition macros are only valid if the
+** SQLITE_CORE macros is undefined.
+*/
+#ifndef SQLITE_CORE
+#define sqlite3_aggregate_context      sqlite3_api->aggregate_context
+#ifndef SQLITE_OMIT_DEPRECATED
+#define sqlite3_aggregate_count        sqlite3_api->aggregate_count
+#endif
+#define sqlite3_bind_blob              sqlite3_api->bind_blob
+#define sqlite3_bind_double            sqlite3_api->bind_double
+#define sqlite3_bind_int               sqlite3_api->bind_int
+#define sqlite3_bind_int64             sqlite3_api->bind_int64
+#define sqlite3_bind_null              sqlite3_api->bind_null
+#define sqlite3_bind_parameter_count   sqlite3_api->bind_parameter_count
+#define sqlite3_bind_parameter_index   sqlite3_api->bind_parameter_index
+#define sqlite3_bind_parameter_name    sqlite3_api->bind_parameter_name
+#define sqlite3_bind_text              sqlite3_api->bind_text
+#define sqlite3_bind_text16            sqlite3_api->bind_text16
+#define sqlite3_bind_value             sqlite3_api->bind_value
+#define sqlite3_busy_handler           sqlite3_api->busy_handler
+#define sqlite3_busy_timeout           sqlite3_api->busy_timeout
+#define sqlite3_changes                sqlite3_api->changes
+#define sqlite3_close                  sqlite3_api->close
+#define sqlite3_collation_needed       sqlite3_api->collation_needed
+#define sqlite3_collation_needed16     sqlite3_api->collation_needed16
+#define sqlite3_column_blob            sqlite3_api->column_blob
+#define sqlite3_column_bytes           sqlite3_api->column_bytes
+#define sqlite3_column_bytes16         sqlite3_api->column_bytes16
+#define sqlite3_column_count           sqlite3_api->column_count
+#define sqlite3_column_database_name   sqlite3_api->column_database_name
+#define sqlite3_column_database_name16 sqlite3_api->column_database_name16
+#define sqlite3_column_decltype        sqlite3_api->column_decltype
+#define sqlite3_column_decltype16      sqlite3_api->column_decltype16
+#define sqlite3_column_double          sqlite3_api->column_double
+#define sqlite3_column_int             sqlite3_api->column_int
+#define sqlite3_column_int64           sqlite3_api->column_int64
+#define sqlite3_column_name            sqlite3_api->column_name
+#define sqlite3_column_name16          sqlite3_api->column_name16
+#define sqlite3_column_origin_name     sqlite3_api->column_origin_name
+#define sqlite3_column_origin_name16   sqlite3_api->column_origin_name16
+#define sqlite3_column_table_name      sqlite3_api->column_table_name
+#define sqlite3_column_table_name16    sqlite3_api->column_table_name16
+#define sqlite3_column_text            sqlite3_api->column_text
+#define sqlite3_column_text16          sqlite3_api->column_text16
+#define sqlite3_column_type            sqlite3_api->column_type
+#define sqlite3_column_value           sqlite3_api->column_value
+#define sqlite3_commit_hook            sqlite3_api->commit_hook
+#define sqlite3_complete               sqlite3_api->complete
+#define sqlite3_complete16             sqlite3_api->complete16
+#define sqlite3_create_collation       sqlite3_api->create_collation
+#define sqlite3_create_collation16     sqlite3_api->create_collation16
+#define sqlite3_create_function        sqlite3_api->create_function
+#define sqlite3_create_function16      sqlite3_api->create_function16
+#define sqlite3_create_module          sqlite3_api->create_module
+#define sqlite3_create_module_v2       sqlite3_api->create_module_v2
+#define sqlite3_data_count             sqlite3_api->data_count
+#define sqlite3_db_handle              sqlite3_api->db_handle
+#define sqlite3_declare_vtab           sqlite3_api->declare_vtab
+#define sqlite3_enable_shared_cache    sqlite3_api->enable_shared_cache
+#define sqlite3_errcode                sqlite3_api->errcode
+#define sqlite3_errmsg                 sqlite3_api->errmsg
+#define sqlite3_errmsg16               sqlite3_api->errmsg16
+#define sqlite3_exec                   sqlite3_api->exec
+#ifndef SQLITE_OMIT_DEPRECATED
+#define sqlite3_expired                sqlite3_api->expired
+#endif
+#define sqlite3_finalize               sqlite3_api->finalize
+#define sqlite3_free                   sqlite3_api->free
+#define sqlite3_free_table             sqlite3_api->free_table
+#define sqlite3_get_autocommit         sqlite3_api->get_autocommit
+#define sqlite3_get_auxdata            sqlite3_api->get_auxdata
+#define sqlite3_get_table              sqlite3_api->get_table
+#ifndef SQLITE_OMIT_DEPRECATED
+#define sqlite3_global_recover         sqlite3_api->global_recover
+#endif
+#define sqlite3_interrupt              sqlite3_api->interruptx
+#define sqlite3_last_insert_rowid      sqlite3_api->last_insert_rowid
+#define sqlite3_libversion             sqlite3_api->libversion
+#define sqlite3_libversion_number      sqlite3_api->libversion_number
+#define sqlite3_malloc                 sqlite3_api->malloc
+#define sqlite3_mprintf                sqlite3_api->mprintf
+#define sqlite3_open                   sqlite3_api->open
+#define sqlite3_open16                 sqlite3_api->open16
+#define sqlite3_prepare                sqlite3_api->prepare
+#define sqlite3_prepare16              sqlite3_api->prepare16
+#define sqlite3_prepare_v2             sqlite3_api->prepare_v2
+#define sqlite3_prepare16_v2           sqlite3_api->prepare16_v2
+#define sqlite3_profile                sqlite3_api->profile
+#define sqlite3_progress_handler       sqlite3_api->progress_handler
+#define sqlite3_realloc                sqlite3_api->realloc
+#define sqlite3_reset                  sqlite3_api->reset
+#define sqlite3_result_blob            sqlite3_api->result_blob
+#define sqlite3_result_double          sqlite3_api->result_double
+#define sqlite3_result_error           sqlite3_api->result_error
+#define sqlite3_result_error16         sqlite3_api->result_error16
+#define sqlite3_result_int             sqlite3_api->result_int
+#define sqlite3_result_int64           sqlite3_api->result_int64
+#define sqlite3_result_null            sqlite3_api->result_null
+#define sqlite3_result_text            sqlite3_api->result_text
+#define sqlite3_result_text16          sqlite3_api->result_text16
+#define sqlite3_result_text16be        sqlite3_api->result_text16be
+#define sqlite3_result_text16le        sqlite3_api->result_text16le
+#define sqlite3_result_value           sqlite3_api->result_value
+#define sqlite3_rollback_hook          sqlite3_api->rollback_hook
+#define sqlite3_set_authorizer         sqlite3_api->set_authorizer
+#define sqlite3_set_auxdata            sqlite3_api->set_auxdata
+#define sqlite3_snprintf               sqlite3_api->snprintf
+#define sqlite3_step                   sqlite3_api->step
+#define sqlite3_table_column_metadata  sqlite3_api->table_column_metadata
+#define sqlite3_thread_cleanup         sqlite3_api->thread_cleanup
+#define sqlite3_total_changes          sqlite3_api->total_changes
+#define sqlite3_trace                  sqlite3_api->trace
+#ifndef SQLITE_OMIT_DEPRECATED
+#define sqlite3_transfer_bindings      sqlite3_api->transfer_bindings
+#endif
+#define sqlite3_update_hook            sqlite3_api->update_hook
+#define sqlite3_user_data              sqlite3_api->user_data
+#define sqlite3_value_blob             sqlite3_api->value_blob
+#define sqlite3_value_bytes            sqlite3_api->value_bytes
+#define sqlite3_value_bytes16          sqlite3_api->value_bytes16
+#define sqlite3_value_double           sqlite3_api->value_double
+#define sqlite3_value_int              sqlite3_api->value_int
+#define sqlite3_value_int64            sqlite3_api->value_int64
+#define sqlite3_value_numeric_type     sqlite3_api->value_numeric_type
+#define sqlite3_value_text             sqlite3_api->value_text
+#define sqlite3_value_text16           sqlite3_api->value_text16
+#define sqlite3_value_text16be         sqlite3_api->value_text16be
+#define sqlite3_value_text16le         sqlite3_api->value_text16le
+#define sqlite3_value_type             sqlite3_api->value_type
+#define sqlite3_vmprintf               sqlite3_api->vmprintf
+#define sqlite3_overload_function      sqlite3_api->overload_function
+#define sqlite3_prepare_v2             sqlite3_api->prepare_v2
+#define sqlite3_prepare16_v2           sqlite3_api->prepare16_v2
+#define sqlite3_clear_bindings         sqlite3_api->clear_bindings
+#define sqlite3_bind_zeroblob          sqlite3_api->bind_zeroblob
+#define sqlite3_blob_bytes             sqlite3_api->blob_bytes
+#define sqlite3_blob_close             sqlite3_api->blob_close
+#define sqlite3_blob_open              sqlite3_api->blob_open
+#define sqlite3_blob_read              sqlite3_api->blob_read
+#define sqlite3_blob_write             sqlite3_api->blob_write
+#define sqlite3_create_collation_v2    sqlite3_api->create_collation_v2
+#define sqlite3_file_control           sqlite3_api->file_control
+#define sqlite3_memory_highwater       sqlite3_api->memory_highwater
+#define sqlite3_memory_used            sqlite3_api->memory_used
+#define sqlite3_mutex_alloc            sqlite3_api->mutex_alloc
+#define sqlite3_mutex_enter            sqlite3_api->mutex_enter
+#define sqlite3_mutex_free             sqlite3_api->mutex_free
+#define sqlite3_mutex_leave            sqlite3_api->mutex_leave
+#define sqlite3_mutex_try              sqlite3_api->mutex_try
+#define sqlite3_open_v2                sqlite3_api->open_v2
+#define sqlite3_release_memory         sqlite3_api->release_memory
+#define sqlite3_result_error_nomem     sqlite3_api->result_error_nomem
+#define sqlite3_result_error_toobig    sqlite3_api->result_error_toobig
+#define sqlite3_sleep                  sqlite3_api->sleep
+#define sqlite3_soft_heap_limit        sqlite3_api->soft_heap_limit
+#define sqlite3_vfs_find               sqlite3_api->vfs_find
+#define sqlite3_vfs_register           sqlite3_api->vfs_register
+#define sqlite3_vfs_unregister         sqlite3_api->vfs_unregister
+#define sqlite3_threadsafe             sqlite3_api->xthreadsafe
+#define sqlite3_result_zeroblob        sqlite3_api->result_zeroblob
+#define sqlite3_result_error_code      sqlite3_api->result_error_code
+#define sqlite3_test_control           sqlite3_api->test_control
+#define sqlite3_randomness             sqlite3_api->randomness
+#define sqlite3_context_db_handle      sqlite3_api->context_db_handle
+#define sqlite3_extended_result_codes  sqlite3_api->extended_result_codes
+#define sqlite3_limit                  sqlite3_api->limit
+#define sqlite3_next_stmt              sqlite3_api->next_stmt
+#define sqlite3_sql                    sqlite3_api->sql
+#define sqlite3_status                 sqlite3_api->status
+#define sqlite3_backup_finish          sqlite3_api->backup_finish
+#define sqlite3_backup_init            sqlite3_api->backup_init
+#define sqlite3_backup_pagecount       sqlite3_api->backup_pagecount
+#define sqlite3_backup_remaining       sqlite3_api->backup_remaining
+#define sqlite3_backup_step            sqlite3_api->backup_step
+#define sqlite3_compileoption_get      sqlite3_api->compileoption_get
+#define sqlite3_compileoption_used     sqlite3_api->compileoption_used
+#define sqlite3_create_function_v2     sqlite3_api->create_function_v2
+#define sqlite3_db_config              sqlite3_api->db_config
+#define sqlite3_db_mutex               sqlite3_api->db_mutex
+#define sqlite3_db_status              sqlite3_api->db_status
+#define sqlite3_extended_errcode       sqlite3_api->extended_errcode
+#define sqlite3_log                    sqlite3_api->log
+#define sqlite3_soft_heap_limit64      sqlite3_api->soft_heap_limit64
+#define sqlite3_sourceid               sqlite3_api->sourceid
+#define sqlite3_stmt_status            sqlite3_api->stmt_status
+#define sqlite3_strnicmp               sqlite3_api->strnicmp
+#define sqlite3_unlock_notify          sqlite3_api->unlock_notify
+#define sqlite3_wal_autocheckpoint     sqlite3_api->wal_autocheckpoint
+#define sqlite3_wal_checkpoint         sqlite3_api->wal_checkpoint
+#define sqlite3_wal_hook               sqlite3_api->wal_hook
+#define sqlite3_blob_reopen            sqlite3_api->blob_reopen
+#define sqlite3_vtab_config            sqlite3_api->vtab_config
+#define sqlite3_vtab_on_conflict       sqlite3_api->vtab_on_conflict
+#endif /* SQLITE_CORE */
+
+#define SQLITE_EXTENSION_INIT1     const sqlite3_api_routines *sqlite3_api = 0;
+#define SQLITE_EXTENSION_INIT2(v)  sqlite3_api = v;
+
+#endif /* _SQLITE3EXT_H_ */

deps/sqlite3/tea/Makefile.in

+# Makefile.in --
+#
+#	This file is a Makefile for Sample TEA Extension.  If it has the name
+#	"Makefile.in" then it is a template for a Makefile;  to generate the
+#	actual Makefile, run "./configure", which is a configuration script
+#	generated by the "autoconf" program (constructs like "@foo@" will get
+#	replaced in the actual Makefile.
+#
+# Copyright (c) 1999 Scriptics Corporation.
+# Copyright (c) 2002-2005 ActiveState Corporation.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+#
+# RCS: @(#) $Id: Makefile.in,v 1.59 2005/07/26 19:17:02 mdejong Exp $
+
+#========================================================================
+# Add additional lines to handle any additional AC_SUBST cases that
+# have been added in a customized configure script.
+#========================================================================
+
+#SAMPLE_NEW_VAR	= @SAMPLE_NEW_VAR@
+
+#========================================================================
+# Nothing of the variables below this line should need to be changed.
+# Please check the TARGETS section below to make sure the make targets
+# are correct.
+#========================================================================
+
+#========================================================================
+# The names of the source files is defined in the configure script.
+# The object files are used for linking into the final library.
+# This will be used when a dist target is added to the Makefile.
+# It is not important to specify the directory, as long as it is the
+# $(srcdir) or in the generic, win or unix subdirectory.
+#========================================================================
+
+PKG_SOURCES	= @PKG_SOURCES@
+PKG_OBJECTS	= @PKG_OBJECTS@
+
+PKG_STUB_SOURCES = @PKG_STUB_SOURCES@
+PKG_STUB_OBJECTS = @PKG_STUB_OBJECTS@
+
+#========================================================================
+# PKG_TCL_SOURCES identifies Tcl runtime files that are associated with
+# this package that need to be installed, if any.
+#========================================================================
+
+PKG_TCL_SOURCES = @PKG_TCL_SOURCES@
+
+#========================================================================
+# This is a list of public header files to be installed, if any.
+#========================================================================
+
+PKG_HEADERS	= @PKG_HEADERS@
+
+#========================================================================
+# "PKG_LIB_FILE" refers to the library (dynamic or static as per
+# configuration options) composed of the named objects.
+#========================================================================
+
+PKG_LIB_FILE	= @PKG_LIB_FILE@
+PKG_STUB_LIB_FILE = @PKG_STUB_LIB_FILE@
+
+lib_BINARIES	= $(PKG_LIB_FILE)
+BINARIES	= $(lib_BINARIES)
+
+SHELL		= @SHELL@
+
+srcdir		= @srcdir@
+prefix		= @prefix@
+exec_prefix	= @exec_prefix@
+
+bindir		= @bindir@
+libdir		= @libdir@
+datadir		= @datadir@
+mandir		= @mandir@
+includedir	= @includedir@
+
+DESTDIR		=
+
+PKG_DIR		= $(PACKAGE_NAME)$(PACKAGE_VERSION)
+pkgdatadir	= $(datadir)/$(PKG_DIR)
+pkglibdir	= $(libdir)/$(PKG_DIR)
+pkgincludedir	= $(includedir)/$(PKG_DIR)
+
+top_builddir	= .
+
+INSTALL		= @INSTALL@
+INSTALL_PROGRAM	= @INSTALL_PROGRAM@
+INSTALL_DATA	= @INSTALL_DATA@
+INSTALL_SCRIPT	= @INSTALL_SCRIPT@
+
+PACKAGE_NAME	= @PACKAGE_NAME@
+PACKAGE_VERSION	= @PACKAGE_VERSION@
+CC		= @CC@
+CFLAGS_DEFAULT	= @CFLAGS_DEFAULT@
+CFLAGS_WARNING	= @CFLAGS_WARNING@
+CLEANFILES	= @CLEANFILES@
+EXEEXT		= @EXEEXT@
+LDFLAGS_DEFAULT	= @LDFLAGS_DEFAULT@
+MAKE_LIB	= @MAKE_LIB@
+MAKE_SHARED_LIB	= @MAKE_SHARED_LIB@
+MAKE_STATIC_LIB	= @MAKE_STATIC_LIB@
+MAKE_STUB_LIB	= @MAKE_STUB_LIB@
+OBJEXT		= @OBJEXT@
+RANLIB		= @RANLIB@
+RANLIB_STUB	= @RANLIB_STUB@
+SHLIB_CFLAGS	= @SHLIB_CFLAGS@
+SHLIB_LD	= @SHLIB_LD@
+SHLIB_LD_LIBS	= @SHLIB_LD_LIBS@
+STLIB_LD	= @STLIB_LD@
+#TCL_DEFS	= @TCL_DEFS@
+TCL_BIN_DIR	= @TCL_BIN_DIR@
+TCL_SRC_DIR	= @TCL_SRC_DIR@
+#TK_BIN_DIR	= @TK_BIN_DIR@
+#TK_SRC_DIR	= @TK_SRC_DIR@
+
+# This is no longer necessary even for packages that use private Tcl headers
+#TCL_TOP_DIR_NATIVE	= @TCL_TOP_DIR_NATIVE@
+# Not used, but retained for reference of what libs Tcl required
+#TCL_LIBS	= @TCL_LIBS@
+
+#========================================================================
+# TCLLIBPATH seeds the auto_path in Tcl's init.tcl so we can test our
+# package without installing.  The other environment variables allow us
+# to test against an uninstalled Tcl.  Add special env vars that you
+# require for testing here (like TCLX_LIBRARY).
+#========================================================================
+
+EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR)
+#EXTRA_PATH	= $(top_builddir):$(TCL_BIN_DIR):$(TK_BIN_DIR)
+TCLLIBPATH	= $(top_builddir)
+TCLSH_ENV	= TCL_LIBRARY=`@CYGPATH@ $(TCL_SRC_DIR)/library` \
+		  @LD_LIBRARY_PATH_VAR@="$(EXTRA_PATH):$(@LD_LIBRARY_PATH_VAR@)" \
+		  PATH="$(EXTRA_PATH):$(PATH)" \
+		  TCLLIBPATH="$(TCLLIBPATH)"
+#		  TK_LIBRARY=`@CYGPATH@ $(TK_SRC_DIR)/library`
+
+TCLSH_PROG	= @TCLSH_PROG@
+TCLSH	= $(TCLSH_ENV) $(TCLSH_PROG)
+
+#WISH_PROG	= @WISH_PROG@
+#WISH	= $(TCLSH_ENV) $(WISH_PROG)
+
+
+SHARED_BUILD	= @SHARED_BUILD@
+
+INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@
+#INCLUDES	= @PKG_INCLUDES@ @TCL_INCLUDES@ @TK_INCLUDES@ @TK_XINCLUDES@
+
+PKG_CFLAGS	= @PKG_CFLAGS@
+
+# TCL_DEFS is not strictly need here, but if you remove it, then you
+# must make sure that configure.in checks for the necessary components
+# that your library may use.  TCL_DEFS can actually be a problem if
+# you do not compile with a similar machine setup as the Tcl core was
+# compiled with.
+#DEFS		= $(TCL_DEFS) @DEFS@ $(PKG_CFLAGS)
+DEFS		= @DEFS@ $(PKG_CFLAGS)
+
+CONFIG_CLEAN_FILES = Makefile pkgIndex.tcl
+
+CPPFLAGS	= @CPPFLAGS@
+LIBS		= @PKG_LIBS@ @LIBS@
+AR		= @AR@
+CFLAGS		= @CFLAGS@
+COMPILE		= $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+
+#========================================================================
+# Start of user-definable TARGETS section
+#========================================================================
+
+#========================================================================
+# TEA TARGETS.  Please note that the "libraries:" target refers to platform
+# independent files, and the "binaries:" target inclues executable programs and
+# platform-dependent libraries.  Modify these targets so that they install
+# the various pieces of your package.  The make and install rules
+# for the BINARIES that you specified above have already been done.
+#========================================================================
+
+all: binaries libraries doc
+
+#========================================================================
+# The binaries target builds executable programs, Windows .dll's, unix
+# shared/static libraries, and any other platform-dependent files.
+# The list of targets to build for "binaries:" is specified at the top
+# of the Makefile, in the "BINARIES" variable.
+#========================================================================
+
+binaries: $(BINARIES)
+
+libraries:
+
+
+#========================================================================
+# Your doc target should differentiate from doc builds (by the developer)
+# and doc installs (see install-doc), which just install the docs on the
+# end user machine when building from source.
+#========================================================================
+
+doc:
+	@echo "If you have documentation to create, place the commands to"
+	@echo "build the docs in the 'doc:' target.  For example:"
+	@echo "        xml2nroff sample.xml > sample.n"
+	@echo "        xml2html sample.xml > sample.html"
+
+install: all install-binaries install-libraries install-doc
+
+install-binaries: binaries install-lib-binaries install-bin-binaries
+
+#========================================================================
+# This rule installs platform-independent files, such as header files.
+# The list=...; for p in $$list handles the empty list case x-platform.
+#========================================================================
+
+install-libraries: libraries
+	@mkdir -p $(DESTDIR)$(includedir)
+	@echo "Installing header files in $(DESTDIR)$(includedir)"
+	@list='$(PKG_HEADERS)'; for i in $$list; do \
+	    echo "Installing $(srcdir)/$$i" ; \
+	    $(INSTALL_DATA) $(srcdir)/$$i $(DESTDIR)$(includedir) ; \
+	done;
+
+#========================================================================
+# Install documentation.  Unix manpages should go in the $(mandir)
+# directory.
+#========================================================================
+
+install-doc: doc
+	@mkdir -p $(DESTDIR)$(mandir)/mann
+	@echo "Installing documentation in $(DESTDIR)$(mandir)"
+	@list='$(srcdir)/doc/*.n'; for i in $$list; do \
+	    echo "Installing $$i"; \
+	    rm -f $(DESTDIR)$(mandir)/mann/`basename $$i`; \
+	    $(INSTALL_DATA) $$i $(DESTDIR)$(mandir)/mann ; \
+	done
+
+test: binaries libraries
+	@echo "SQLite TEA distribution does not include tests"
+
+shell: binaries libraries
+	@$(TCLSH) $(SCRIPT)
+
+gdb:
+	$(TCLSH_ENV) gdb $(TCLSH_PROG) $(SCRIPT)
+
+depend:
+
+#========================================================================
+# $(PKG_LIB_FILE) should be listed as part of the BINARIES variable
+# mentioned above.  That will ensure that this target is built when you
+# run "make binaries".
+#
+# The $(PKG_OBJECTS) objects are created and linked into the final
+# library.  In most cases these object files will correspond to the
+# source files above.
+#========================================================================
+
+$(PKG_LIB_FILE): $(PKG_OBJECTS)
+	-rm -f $(PKG_LIB_FILE)
+	${MAKE_LIB}
+	$(RANLIB) $(PKG_LIB_FILE)
+
+$(PKG_STUB_LIB_FILE): $(PKG_STUB_OBJECTS)
+	-rm -f $(PKG_STUB_LIB_FILE)
+	${MAKE_STUB_LIB}
+	$(RANLIB_STUB) $(PKG_STUB_LIB_FILE)
+
+#========================================================================
+# We need to enumerate the list of .c to .o lines here.
+#
+# In the following lines, $(srcdir) refers to the toplevel directory
+# containing your extension.  If your sources are in a subdirectory,
+# you will have to modify the paths to reflect this:
+#
+# sample.$(OBJEXT): $(srcdir)/generic/sample.c
+# 	$(COMPILE) -c `@CYGPATH@ $(srcdir)/generic/sample.c` -o $@
+#
+# Setting the VPATH variable to a list of paths will cause the makefile
+# to look into these paths when resolving .c to .obj dependencies.
+# As necessary, add $(srcdir):$(srcdir)/compat:....
+#========================================================================
+
+VPATH = $(srcdir):$(srcdir)/generic:$(srcdir)/unix:$(srcdir)/win
+
+.c.@OBJEXT@:
+	$(COMPILE) -c `@CYGPATH@ $<` -o $@
+
+#========================================================================
+# Distribution creation
+# You may need to tweak this target to make it work correctly.
+#========================================================================
+
+#COMPRESS	= tar cvf $(PKG_DIR).tar $(PKG_DIR); compress $(PKG_DIR).tar
+COMPRESS	= gtar zcvf $(PKG_DIR).tar.gz $(PKG_DIR)
+DIST_ROOT	= /tmp/dist
+DIST_DIR	= $(DIST_ROOT)/$(PKG_DIR)
+
+dist-clean:
+	rm -rf $(DIST_DIR) $(DIST_ROOT)/$(PKG_DIR).tar.*
+
+dist: dist-clean
+	mkdir -p $(DIST_DIR)
+	cp -p $(srcdir)/README* $(srcdir)/license* \
+		$(srcdir)/aclocal.m4 $(srcdir)/configure $(srcdir)/*.in \
+		$(DIST_DIR)/
+	chmod 664 $(DIST_DIR)/Makefile.in $(DIST_DIR)/aclocal.m4
+	chmod 775 $(DIST_DIR)/configure $(DIST_DIR)/configure.in
+
+	for i in $(srcdir)/*.[ch]; do \
+	    if [ -f $$i ]; then \
+		cp -p $$i $(DIST_DIR)/ ; \
+	    fi; \
+	done;
+
+	mkdir $(DIST_DIR)/tclconfig
+	cp $(srcdir)/tclconfig/install-sh $(srcdir)/tclconfig/tcl.m4 \
+		$(DIST_DIR)/tclconfig/
+	chmod 664 $(DIST_DIR)/tclconfig/tcl.m4
+	chmod +x $(DIST_DIR)/tclconfig/install-sh
+
+	list='demos doc generic library mac tests unix win'; \
+	for p in $$list; do \
+	    if test -d $(srcdir)/$$p ; then \
+		mkdir $(DIST_DIR)/$$p; \
+		cp -p $(srcdir)/$$p/*.* $(DIST_DIR)/$$p/; \
+	    fi; \
+	done
+
+	(cd $(DIST_ROOT); $(COMPRESS);)
+
+#========================================================================
+# End of user-definable section
+#========================================================================
+
+#========================================================================
+# Don't modify the file to clean here.  Instead, set the "CLEANFILES"
+# variable in configure.in
+#========================================================================
+
+clean:  
+	-test -z "$(BINARIES)" || rm -f $(BINARIES)
+	-rm -f *.$(OBJEXT) core *.core
+	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+
+distclean: clean
+	-rm -f *.tab.c
+	-rm -f $(CONFIG_CLEAN_FILES)
+	-rm -f config.cache config.log config.status
+
+#========================================================================
+# Install binary object libraries.  On Windows this includes both .dll and
+# .lib files.  Because the .lib files are not explicitly listed anywhere,
+# we need to deduce their existence from the .dll file of the same name.
+# Library files go into the lib directory.
+# In addition, this will generate the pkgIndex.tcl
+# file in the install location (assuming it can find a usable tclsh shell)
+#
+# You should not have to modify this target.
+#========================================================================
+
+install-lib-binaries: binaries
+	@mkdir -p $(DESTDIR)$(pkglibdir)
+	@list='$(lib_BINARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p"; \
+	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(pkglibdir)/$$p; \
+	    stub=`echo $$p|sed -e "s/.*\(stub\).*/\1/"`; \
+	    if test "x$$stub" = "xstub"; then \
+		echo " $(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p"; \
+		$(RANLIB_STUB) $(DESTDIR)$(pkglibdir)/$$p; \
+	    else \
+		echo " $(RANLIB) $(DESTDIR)$(pkglibdir)/$$p"; \
+		$(RANLIB) $(DESTDIR)$(pkglibdir)/$$p; \
+	    fi; \
+	    ext=`echo $$p|sed -e "s/.*\.//"`; \
+	    if test "x$$ext" = "xdll"; then \
+		lib=`basename $$p|sed -e 's/.[^.]*$$//'`.lib; \
+		if test -f $$lib; then \
+		    echo " $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib"; \
+	            $(INSTALL_DATA) $$lib $(DESTDIR)$(pkglibdir)/$$lib; \
+		fi; \
+	    fi; \
+	  fi; \
+	done
+	@list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+	  if test -f $(srcdir)/$$p; then \
+	    destp=`basename $$p`; \
+	    echo " Install $$destp $(DESTDIR)$(pkglibdir)/$$destp"; \
+	    $(INSTALL_DATA) $(srcdir)/$$p $(DESTDIR)$(pkglibdir)/$$destp; \
+	  fi; \
+	done
+	@if test "x$(SHARED_BUILD)" = "x1"; then \
+	    echo " Install pkgIndex.tcl $(DESTDIR)$(pkglibdir)"; \
+	    $(INSTALL_DATA) pkgIndex.tcl $(DESTDIR)$(pkglibdir); \
+	fi
+
+#========================================================================
+# Install binary executables (e.g. .exe files and dependent .dll files)
+# This is for files that must go in the bin directory (located next to
+# wish and tclsh), like dependent .dll files on Windows.
+#
+# You should not have to modify this target, except to define bin_BINARIES
+# above if necessary.
+#========================================================================
+
+install-bin-binaries: binaries
+	@mkdir -p $(DESTDIR)$(bindir)
+	@list='$(bin_BINARIES)'; for p in $$list; do \
+	  if test -f $$p; then \
+	    echo " $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p"; \
+	    $(INSTALL_PROGRAM) $$p $(DESTDIR)$(bindir)/$$p; \
+	  fi; \
+	done
+
+.SUFFIXES: .c .$(OBJEXT)
+
+Makefile: $(srcdir)/Makefile.in  $(top_builddir)/config.status
+	cd $(top_builddir) \
+	  && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+uninstall-binaries:
+	list='$(lib_BINARIES)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+	done
+	list='$(PKG_TCL_SOURCES)'; for p in $$list; do \
+	  p=`basename $$p`; \
+	  rm -f $(DESTDIR)$(pkglibdir)/$$p; \
+	done
+	list='$(bin_BINARIES)'; for p in $$list; do \
+	  rm -f $(DESTDIR)$(bindir)/$$p; \
+	done
+
+.PHONY: all binaries clean depend distclean doc install libraries test
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

deps/sqlite3/tea/README

+This is the SQLite extension for Tcl using the Tcl Extension
+Architecture (TEA).  For additional information on SQLite see
+
+        http://www.sqlite.org/
+
+
+UNIX BUILD
+==========
+
+Building under most UNIX systems is easy, just run the configure script
+and then run make. For more information about the build process, see
+the tcl/unix/README file in the Tcl src dist. The following minimal
+example will install the extension in the /opt/tcl directory.
+
+	$ cd sqlite-*-tea
+	$ ./configure --prefix=/opt/tcl
+	$ make
+	$ make install
+
+WINDOWS BUILD
+=============
+
+The recommended method to build extensions under windows is to use the
+Msys + Mingw build process. This provides a Unix-style build while
+generating native Windows binaries. Using the Msys + Mingw build tools
+means that you can use the same configure script as per the Unix build
+to create a Makefile. See the tcl/win/README file for the URL of
+the Msys + Mingw download.
+
+If you have VC++ then you may wish to use the files in the win
+subdirectory and build the extension using just VC++. These files have
+been designed to be as generic as possible but will require some
+additional maintenance by the project developer to synchronise with
+the TEA configure.in and Makefile.in files. Instructions for using the
+VC++ makefile are written in the first part of the Makefile.vc
+file.

deps/sqlite3/tea/aclocal.m4

+#
+# Include the TEA standard macro set
+#
+
+builtin(include,tclconfig/tcl.m4)
+
+#
+# Add here whatever m4 macros you want to define for your package
+#

deps/sqlite3/tea/configure.in

+#!/bin/bash -norc
+dnl	This file is an input file used by the GNU "autoconf" program to
+dnl	generate the file "configure", which is run during Tcl installation
+dnl	to configure the system for the local environment.
+#
+# RCS: @(#) $Id: configure.in,v 1.43 2005/07/26 19:17:05 mdejong Exp $
+
+#-----------------------------------------------------------------------
+# Sample configure.in for Tcl Extensions.  The only places you should
+# need to modify this file are marked by the string __CHANGE__
+#-----------------------------------------------------------------------
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Set your package name and version numbers here.
+#
+# This initializes the environment with PACKAGE_NAME and PACKAGE_VERSION
+# set as provided.  These will also be added as -D defs in your Makefile
+# so you can encode the package version directly into the source files.
+#-----------------------------------------------------------------------
+
+AC_INIT([sqlite], [3.7.8])
+
+#--------------------------------------------------------------------
+# Call TEA_INIT as the first TEA_ macro to set up initial vars.
+# This will define a ${TEA_PLATFORM} variable == "unix" or "windows"
+# as well as PKG_LIB_FILE and PKG_STUB_LIB_FILE.
+#--------------------------------------------------------------------
+
+TEA_INIT([3.9])
+
+AC_CONFIG_AUX_DIR(tclconfig)
+
+#--------------------------------------------------------------------
+# Load the tclConfig.sh file
+#--------------------------------------------------------------------
+
+TEA_PATH_TCLCONFIG
+TEA_LOAD_TCLCONFIG
+
+#--------------------------------------------------------------------
+# Load the tkConfig.sh file if necessary (Tk extension)
+#--------------------------------------------------------------------
+
+#TEA_PATH_TKCONFIG
+#TEA_LOAD_TKCONFIG
+
+#-----------------------------------------------------------------------
+# Handle the --prefix=... option by defaulting to what Tcl gave.
+# Must be called after TEA_LOAD_TCLCONFIG and before TEA_SETUP_COMPILER.
+#-----------------------------------------------------------------------
+
+TEA_PREFIX
+
+#-----------------------------------------------------------------------
+# Standard compiler checks.
+# This sets up CC by using the CC env var, or looks for gcc otherwise.
+# This also calls AC_PROG_CC, AC_PROG_INSTALL and a few others to create
+# the basic setup necessary to compile executables.
+#-----------------------------------------------------------------------
+
+TEA_SETUP_COMPILER
+
+#-----------------------------------------------------------------------
+# __CHANGE__
+# Specify the C source files to compile in TEA_ADD_SOURCES,
+# public headers that need to be installed in TEA_ADD_HEADERS,
+# stub library C source files to compile in TEA_ADD_STUB_SOURCES,
+# and runtime Tcl library files in TEA_ADD_TCL_SOURCES.
+# This defines PKG(_STUB)_SOURCES, PKG(_STUB)_OBJECTS, PKG_HEADERS
+# and PKG_TCL_SOURCES.
+#-----------------------------------------------------------------------
+
+TEA_ADD_SOURCES([tclsqlite3.c])
+TEA_ADD_HEADERS([])
+TEA_ADD_INCLUDES([-I\"`\${CYGPATH} \${srcdir}/generic`\"])
+TEA_ADD_LIBS([])
+TEA_ADD_CFLAGS([-DSQLITE_ENABLE_FTS3=1])
+#TEA_ADD_CFLAGS([-DSQLITE_3_SUFFIX_ONLY=1])
+TEA_ADD_STUB_SOURCES([])
+TEA_ADD_TCL_SOURCES([])
+
+#--------------------------------------------------------------------
+# The --with-system-sqlite causes the TCL bindings to SQLite to use
+# the system shared library for SQLite rather than statically linking
+# against its own private copy.  This is dangerous and leads to
+# undersirable dependences and is not recommended.
+# Patchs from rmax.
+#--------------------------------------------------------------------
+AC_ARG_WITH([system-sqlite],
+ [AC_HELP_STRING([--with-system-sqlite],
+   [use a system-supplied libsqlite3 instead of the bundled one])],
+ [], [with_system_sqlite=no])
+if test x$with_system_sqlite != xno; then
+ AC_CHECK_HEADER([sqlite3.h],
+   [AC_CHECK_LIB([sqlite3],[sqlite3_initialize],
+     [AC_DEFINE(USE_SYSTEM_SQLITE)
+      LIBS="$LIBS -lsqlite3"])])
+fi
+
+#--------------------------------------------------------------------
+# __CHANGE__
+# Choose which headers you need.  Extension authors should try very
+# hard to only rely on the Tcl public header files.  Internal headers
+# contain private data structures and are subject to change without
+# notice.
+# This MUST be called after TEA_LOAD_TCLCONFIG / TEA_LOAD_TKCONFIG
+#--------------------------------------------------------------------
+
+TEA_PUBLIC_TCL_HEADERS
+#TEA_PRIVATE_TCL_HEADERS
+
+#TEA_PUBLIC_TK_HEADERS
+#TEA_PRIVATE_TK_HEADERS
+#TEA_PATH_X
+
+#--------------------------------------------------------------------
+# Check whether --enable-threads or --disable-threads was given.
+# This auto-enables if Tcl was compiled threaded.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_THREADS
+if test "${TCL_THREADS}" = "1" ; then
+    AC_DEFINE(SQLITE_THREADSAFE, 1, [Trigger sqlite threadsafe build])
+    # Not automatically added by Tcl because its assumed Tcl links to them,
+    # but it may not if it isn't really a threaded build.
+    TEA_ADD_LIBS([$THREADS_LIBS])
+else
+    AC_DEFINE(SQLITE_THREADSAFE, 0, [Trigger sqlite non-threadsafe build])
+fi
+
+#--------------------------------------------------------------------
+# The statement below defines a collection of symbols related to
+# building as a shared library instead of a static library.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SHARED
+
+#--------------------------------------------------------------------
+# This macro figures out what flags to use with the compiler/linker
+# when building shared/static debug/optimized objects.  This information
+# can be taken from the tclConfig.sh file, but this figures it all out.
+#--------------------------------------------------------------------
+
+TEA_CONFIG_CFLAGS
+
+#--------------------------------------------------------------------
+# Set the default compiler switches based on the --enable-symbols option.
+#--------------------------------------------------------------------
+
+TEA_ENABLE_SYMBOLS
+
+#--------------------------------------------------------------------
+# Everyone should be linking against the Tcl stub library.  If you
+# can't for some reason, remove this definition.  If you aren't using
+# stubs, you also need to modify the SHLIB_LD_LIBS setting below to
+# link against the non-stubbed Tcl library.  Add Tk too if necessary.
+#--------------------------------------------------------------------
+
+AC_DEFINE(USE_TCL_STUBS, 1, [Use Tcl stubs])
+#AC_DEFINE(USE_TK_STUBS, 1, [Use Tk stubs])
+
+
+#--------------------------------------------------------------------
+# Redefine fdatasync as fsync on systems that lack fdatasync
+#--------------------------------------------------------------------
+
+AC_CHECK_FUNC(fdatasync, , AC_DEFINE(fdatasync, fsync))
+
+AC_FUNC_STRERROR_R
+
+
+#--------------------------------------------------------------------
+# This macro generates a line to use when building a library.  It
+# depends on values set by the TEA_ENABLE_SHARED, TEA_ENABLE_SYMBOLS,
+# and TEA_LOAD_TCLCONFIG macros above.
+#--------------------------------------------------------------------
+
+TEA_MAKE_LIB
+
+#--------------------------------------------------------------------
+# Determine the name of the tclsh and/or wish executables in the
+# Tcl and Tk build directories or the location they were installed
+# into. These paths are used to support running test cases only,
+# the Makefile should not be making use of these paths to generate
+# a pkgIndex.tcl file or anything else at extension build time.
+#--------------------------------------------------------------------
+
+TEA_PROG_TCLSH
+#TEA_PROG_WISH
+
+#--------------------------------------------------------------------
+# Finally, substitute all of the various values into the Makefile.
+# You may alternatively have a special pkgIndex.tcl.in or other files
+# which require substituting th AC variables in.  Include these here.
+#--------------------------------------------------------------------
+
+AC_OUTPUT([Makefile pkgIndex.tcl])

deps/sqlite3/tea/doc/sqlite3.n

+.TH sqlite3 n 4.1 "Tcl-Extensions"
+.HS sqlite3 tcl
+.BS
+.SH NAME
+sqlite3 \- an interface to the SQLite3 database engine
+.SH SYNOPSIS
+\fBsqlite3\fI command_name ?filename?\fR
+.br
+.SH DESCRIPTION
+SQLite3 is a self-contains, zero-configuration, transactional SQL database
+engine.  This extension provides an easy to use interface for accessing
+SQLite database files from Tcl.
+.PP
+For full documentation see http://www.sqlite.org/ and
+in particular http://www.sqlite.org/tclsqlite.html.

deps/sqlite3/tea/license.terms

+The author disclaims copyright to this source code.  In place of
+a legal notice, here is a blessing:
+
+    May you do good and not evil.
+    May you find forgiveness for yourself and forgive others.
+    May you share freely, never taking more than you give.

deps/sqlite3/tea/pkgIndex.tcl.in

+#
+# Tcl package index file
+#
+# Note sqlite*3* init specifically
+#
+package ifneeded sqlite3 @PACKAGE_VERSION@ \
+    [list load [file join $dir @PKG_LIB_FILE@] Sqlite3]

deps/sqlite3/tea/tclconfig/install-sh

+#!/bin/sh
+
+#
+# install - install a program, script, or datafile
+# This comes from X11R5; it is not part of GNU.
+#
+# $XConsortium: install.sh,v 1.2 89/12/18 14:47:22 jim Exp $
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+#
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+
+instcmd="$mvprog"
+chmodcmd=""
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:  no input file specified"
+	exit 1
+fi
+
+if [ x"$dst" = x ]
+then
+	echo "install:  no destination specified"
+	exit 1
+fi
+
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+if [ -d $dst ]
+then
+	dst="$dst"/`basename $src`
+fi
+
+# Make a temp file name in the proper directory.
+
+dstdir=`dirname $dst`
+dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+$doit $instcmd $src $dsttmp
+
+# and set any options; do chmod last to preserve setuid bits
+
+if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; fi
+if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; fi
+if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; fi
+if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; fi
+
+# Now rename the file to the real destination.
+
+$doit $rmcmd $dst
+$doit $mvcmd $dsttmp $dst
+
+
+exit 0

deps/sqlite3/tea/win/makefile.vc

+# makefile.vc --                                               -*- Makefile -*-
+#
+# Microsoft Visual C++ makefile for use with nmake.exe v1.62+ (VC++ 5.0+)
+#
+# This makefile is based upon the Tcl 8.4 Makefile.vc and modified to 
+# make it suitable as a general package makefile. Look for the word EDIT
+# which marks sections that may need modification. As a minumum you will
+# need to change the PROJECT, DOTVERSION and DLLOBJS variables to values
+# relevant to your package.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+# 
+# Copyright (c) 1995-1996 Sun Microsystems, Inc.
+# Copyright (c) 1998-2000 Ajuba Solutions.
+# Copyright (c) 2001 ActiveState Corporation.
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Pat Thoyts
+#
+#-------------------------------------------------------------------------
+# RCS: @(#)$Id: makefile.vc,v 1.4 2004/07/26 08:22:05 patthoyts Exp $
+#-------------------------------------------------------------------------
+
+!if !defined(MSDEVDIR) && !defined(MSVCDIR) && !defined(VCToolkitInstallDir)
+MSG = ^
+You will need to run vcvars32.bat from Developer Studio, first, to setup^
+the environment.  Jump to this line to read the new instructions.
+!error $(MSG)
+!endif
+
+#------------------------------------------------------------------------------
+# HOW TO USE this makefile:
+#
+# 1)  It is now necessary to have %MSVCDir% set in the environment.  This is
+#     used  as a check to see if vcvars32.bat had been run prior to running
+#     nmake or during the installation of Microsoft Visual C++, MSVCDir had
+#     been set globally and the PATH adjusted.  Either way is valid.
+#
+#     You'll need to run vcvars32.bat contained in the MsDev's vc(98)/bin
+#     directory to setup the proper environment, if needed, for your current
+#     setup.  This is a needed bootstrap requirement and allows the swapping of
+#     different environments to be easier.
+#
+# 2)  To use the Platform SDK (not expressly needed), run setenv.bat after
+#     vcvars32.bat according to the instructions for it.  This can also turn on
+#     the 64-bit compiler, if your SDK has it.
+#
+# 3)  Targets are:
+#	all       -- Builds everything.
+#       <project> -- Builds the project (eg: nmake sample)
+#	test      -- Builds and runs the test suite.
+#	install   -- Installs the built binaries and libraries to $(INSTALLDIR)
+#		     in an appropriate subdirectory.
+#	clean/realclean/distclean -- varying levels of cleaning.
+#
+# 4)  Macros usable on the commandline:
+#	INSTALLDIR=<path>
+#		Sets where to install Tcl from the built binaries.
+#		C:\Progra~1\Tcl is assumed when not specified.
+#
+#	OPTS=static,msvcrt,staticpkg,threads,symbols,profile,loimpact,none
+#		Sets special options for the core.  The default is for none.
+#		Any combination of the above may be used (comma separated).
+#		'none' will over-ride everything to nothing.
+#
+#		static  =  Builds a static library of the core instead of a
+#			   dll.  The shell will be static (and large), as well.
+#		msvcrt  =  Effects the static option only to switch it from
+#			   using libcmt(d) as the C runtime [by default] to
+#			   msvcrt(d). This is useful for static embedding
+#			   support.
+#		staticpkg = Effects the static option only to switch
+#			   tclshXX.exe to have the dde and reg extension linked
+#			   inside it.
+#		threads =  Turns on full multithreading support.
+#		thrdalloc = Use the thread allocator (shared global free pool).
+#		symbols =  Adds symbols for step debugging.
+#		profile =  Adds profiling hooks.  Map file is assumed.
+#		loimpact =  Adds a flag for how NT treats the heap to keep memory
+#			   in use, low.  This is said to impact alloc performance.
+#
+#	STATS=memdbg,compdbg,none
+#		Sets optional memory and bytecode compiler debugging code added
+#		to the core.  The default is for none.  Any combination of the
+#		above may be used (comma separated).  'none' will over-ride
+#		everything to nothing.
+#
+#		memdbg   = Enables the debugging memory allocator.
+#		compdbg  = Enables byte compilation logging.
+#
+#	MACHINE=(IX86|IA64|ALPHA)
+#		Set the machine type used for the compiler, linker, and
+#		resource compiler.  This hook is needed to tell the tools
+#		when alternate platforms are requested.  IX86 is the default
+#		when not specified.
+#
+#	TMP_DIR=<path>
+#	OUT_DIR=<path>
+#		Hooks to allow the intermediate and output directories to be
+#		changed.  $(OUT_DIR) is assumed to be 
+#		$(BINROOT)\(Release|Debug) based on if symbols are requested.
+#		$(TMP_DIR) will de $(OUT_DIR)\<buildtype> by default.
+#
+#	TESTPAT=<file>
+#		Reads the tests requested to be run from this file.
+#
+#	CFG_ENCODING=encoding
+#		name of encoding for configuration information. Defaults
+#		to cp1252
+#
+# 5)  Examples:
+#
+#	Basic syntax of calling nmake looks like this:
+#	nmake [-nologo] -f makefile.vc [target|macrodef [target|macrodef] [...]]
+#
+#                        Standard (no frills)
+#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+#       Setting environment for using Microsoft Visual C++ tools.
+#       c:\tcl_src\win\>nmake -f makefile.vc all
+#       c:\tcl_src\win\>nmake -f makefile.vc install INSTALLDIR=c:\progra~1\tcl
+#
+#                         Building for Win64
+#       c:\tcl_src\win\>c:\progra~1\micros~1\vc98\bin\vcvars32.bat
+#       Setting environment for using Microsoft Visual C++ tools.
+#       c:\tcl_src\win\>c:\progra~1\platfo~1\setenv.bat /pre64 /RETAIL
+#       Targeting Windows pre64 RETAIL
+#       c:\tcl_src\win\>nmake -f makefile.vc MACHINE=IA64
+#
+#------------------------------------------------------------------------------
+#==============================================================================
+###############################################################################
+#------------------------------------------------------------------------------
+
+!if !exist("makefile.vc")
+MSG = ^
+You must run this makefile only from the directory it is in.^
+Please `cd` to its location first.
+!error $(MSG)
+!endif
+
+#-------------------------------------------------------------------------
+# Project specific information (EDIT)
+#
+# You should edit this with the name and version of your project. This
+# information is used to generate the name of the package library and
+# it's install location.
+#
+# For example, the sample extension is  going to build sample04.dll and
+# would install it into $(INSTALLDIR)\lib\sample04
+#
+# You need to specify the object files that need to be linked into your
+# binary here.
+#
+#-------------------------------------------------------------------------
+
+PROJECT = sample
+!include "rules.vc"
+
+DOTVERSION      = 0.5
+VERSION         = $(DOTVERSION:.=)
+STUBPREFIX      = $(PROJECT)stub
+
+DLLOBJS = \
+	$(TMP_DIR)\tclsample.obj \
+	$(TMP_DIR)\sample.obj
+
+#-------------------------------------------------------------------------
+# Target names and paths ( shouldn't need changing )
+#-------------------------------------------------------------------------
+
+BINROOT		= .
+ROOT            = ..
+
+PRJIMPLIB	= $(OUT_DIR)\$(PROJECT)$(VERSION)$(SUFX).lib
+PRJLIBNAME	= $(PROJECT)$(VERSION)$(SUFX).$(EXT)
+PRJLIB		= $(OUT_DIR)\$(PRJLIBNAME)
+
+PRJSTUBLIBNAME	= $(STUBPREFIX)$(VERSION).lib
+PRJSTUBLIB	= $(OUT_DIR)\$(PRJSTUBLIBNAME)
+
+### Make sure we use backslash only.
+PRJ_INSTALL_DIR         = $(_INSTALLDIR)\$(PROJECT)$(DOTVERSION)
+LIB_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+BIN_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+DOC_INSTALL_DIR		= $(PRJ_INSTALL_DIR)
+SCRIPT_INSTALL_DIR	= $(PRJ_INSTALL_DIR)
+INCLUDE_INSTALL_DIR	= $(_TCLDIR)\include
+
+### The following paths CANNOT have spaces in them.
+GENERICDIR	= $(ROOT)\generic
+WINDIR		= $(ROOT)\win
+LIBDIR          = $(ROOT)\library
+DOCDIR		= $(ROOT)\doc
+TOOLSDIR	= $(ROOT)\tools
+COMPATDIR	= $(ROOT)\compat
+
+#---------------------------------------------------------------------
+# Compile flags
+#---------------------------------------------------------------------
+
+!if !$(DEBUG)
+!if $(OPTIMIZING)
+### This cranks the optimization level to maximize speed
+cdebug	= -O2 -Op -Gs
+!else
+cdebug	=
+!endif
+!else if "$(MACHINE)" == "IA64"
+### Warnings are too many, can't support warnings into errors.
+cdebug	= -Z7 -Od -GZ
+!else
+cdebug	= -Z7 -WX -Od -GZ
+!endif
+
+### Declarations common to all compiler options
+cflags = -nologo -c -W3 -YX -Fp$(TMP_DIR)^\
+
+!if $(PENT_0F_ERRATA)
+cflags = $(cflags) -QI0f
+!endif
+
+!if $(ITAN_B_ERRATA)
+cflags = $(cflags) -QIA64_Bx
+!endif
+
+!if $(MSVCRT)
+!if $(DEBUG)
+crt = -MDd
+!else
+crt = -MD
+!endif
+!else
+!if $(DEBUG)
+crt = -MTd
+!else
+crt = -MT
+!endif
+!endif
+
+INCLUDES	= $(TCL_INCLUDES) -I"$(WINDIR)" -I"$(GENERICDIR)"
+BASE_CLFAGS	= $(cflags) $(cdebug) $(crt) $(INCLUDES)
+CON_CFLAGS	= $(cflags) $(cdebug) $(crt) -DCONSOLE
+TCL_CFLAGS	= -DUSE_TCL_STUBS -DPACKAGE_VERSION="\"$(DOTVERSION)\"" \
+                  $(BASE_CLFAGS) $(OPTDEFINES)
+
+#---------------------------------------------------------------------
+# Link flags
+#---------------------------------------------------------------------
+
+!if $(DEBUG)
+ldebug	= -debug:full -debugtype:cv
+!else
+ldebug	= -release -opt:ref -opt:icf,3
+!endif
+
+### Declarations common to all linker options
+lflags	= -nologo -machine:$(MACHINE) $(ldebug)
+
+!if $(PROFILE)
+lflags	= $(lflags) -profile
+!endif
+
+!if $(ALIGN98_HACK) && !$(STATIC_BUILD)
+### Align sections for PE size savings.
+lflags	= $(lflags) -opt:nowin98
+!else if !$(ALIGN98_HACK) && $(STATIC_BUILD)
+### Align sections for speed in loading by choosing the virtual page size.
+lflags	= $(lflags) -align:4096
+!endif
+
+!if $(LOIMPACT)
+lflags	= $(lflags) -ws:aggressive
+!endif
+
+dlllflags = $(lflags) -dll
+conlflags = $(lflags) -subsystem:console
+guilflags = $(lflags) -subsystem:windows
+baselibs   = $(TCLSTUBLIB)
+
+#---------------------------------------------------------------------
+# TclTest flags
+#---------------------------------------------------------------------
+
+!IF "$(TESTPAT)" != ""
+TESTFLAGS = $(TESTFLAGS) -file $(TESTPAT)
+!ENDIF
+
+#---------------------------------------------------------------------
+# Project specific targets (EDIT)
+#---------------------------------------------------------------------
+
+all:	    setup $(PROJECT)
+$(PROJECT): setup $(PRJLIB)
+install:    install-binaries install-libraries install-docs
+
+# Tests need to ensure we load the right dll file we
+# have to handle the output differently on Win9x.
+#
+!if "$(OS)" == "Windows_NT"  || "$(MSVCDIR)" == "IDE"
+test: setup $(PROJECT)
+        set TCL_LIBRARY=$(ROOT)/library
+        $(TCLSH) <<
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+!else
+test: setup $(PROJECT)
+        echo Please wait while the test results are collected
+        set TCL_LIBRARY=$(ROOT)/library
+        $(TCLSH) << >tests.log
+load $(PRJLIB:\=/)
+cd "$(ROOT)/tests"
+set argv "$(TESTFLAGS)"
+source all.tcl
+<<
+        type tests.log | more
+!endif
+
+setup:
+	@if not exist $(OUT_DIR)\nul mkdir $(OUT_DIR)
+	@if not exist $(TMP_DIR)\nul mkdir $(TMP_DIR)
+
+$(PRJLIB): $(DLLOBJS)
+	$(link32) $(dlllflags) -out:$@ $(baselibs) @<<
+$**
+<<
+	-@del $*.exp
+
+$(PRJSTUBLIB): $(PRJSTUBOBJS)
+	$(lib32) -nologo -out:$@ $(PRJSTUBOBJS)
+
+#---------------------------------------------------------------------
+# Implicit rules
+#---------------------------------------------------------------------
+
+{$(WINDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(GENERICDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(COMPATDIR)}.c{$(TMP_DIR)}.obj::
+    $(cc32) $(TCL_CFLAGS) -DBUILD_$(PROJECT) -Fo$(TMP_DIR)\ @<<
+$<
+<<
+
+{$(WINDIR)}.rc{$(TMP_DIR)}.res:
+	$(rc32) -fo $@ -r -i "$(GENERICDIR)" -D__WIN32__ \
+!if $(DEBUG)
+	-d DEBUG \
+!endif
+!if $(TCL_THREADS)
+	-d TCL_THREADS \
+!endif
+!if $(STATIC_BUILD)
+	-d STATIC_BUILD \
+!endif
+	$<
+
+.SUFFIXES:
+.SUFFIXES:.c .rc
+
+#---------------------------------------------------------------------
+# Installation. (EDIT)
+#
+# You may need to modify this section to reflect the final distribution
+# of your files and possibly to generate documentation.
+#
+#---------------------------------------------------------------------
+
+install-binaries:
+	@echo Installing binaries to '$(SCRIPT_INSTALL_DIR)'
+	@if not exist "$(SCRIPT_INSTALL_DIR)" mkdir "$(SCRIPT_INSTALL_DIR)"
+	@$(CPY) $(PRJLIB) "$(SCRIPT_INSTALL_DIR)" >NUL
+
+### Automatic creation of pkgIndex
+#install-libraries:
+#	@echo Installing library files to '$(SCRIPT_INSTALL_DIR)'
+#	@if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
+#	@echo cd "$(SCRIPT_INSTALL_DIR:\=/)" ; pkg_mkIndex . | $(TCLSH)
+
+### Manual creation of pkgIndex
+### Normally the ifneeded command would be:
+###   package ifneeded $(PROJECT) $(DOTVERSION) \
+###      [list load [file join $$dir $(PROJECT)$(VERSION).$(EXT)]]
+### but this project has been named oddly. It has Sample_Init but provides
+### the Tclsha1 package.
+install-libraries:
+        @echo Installing libraries to '$(SCRIPT_INSTALL_DIR)'
+        @if exist $(LIBDIR) $(CPY) $(LIBDIR)\*.tcl "$(SCRIPT_INSTALL_DIR)"
+        @echo Installing package index in '$(SCRIPT_INSTALL_DIR)'
+        @type << >"$(SCRIPT_INSTALL_DIR)\pkgIndex.tcl"
+# Hand-crafted pkgIndex.tcl
+package ifneeded Tclsha1 $(DOTVERSION) [list load [file join $$dir $(PROJECT)$(VERSION).$(EXT)] Sample]
+<<
+
+install-docs:
+	@echo Installing documentation files to '$(DOC_INSTALL_DIR)'
+	@if exist $(DOCDIR) $(CPY) $(DOCDIR)\*.n "$(DOC_INSTALL_DIR)"
+
+#---------------------------------------------------------------------
+# Clean up
+#---------------------------------------------------------------------
+
+clean:
+	@if exist $(TMP_DIR)\nul $(RMDIR) $(TMP_DIR)
+	@if exist $(WINDIR)\version.vc del $(WINDIR)\version.vc
+
+realclean: clean
+	@if exist $(OUT_DIR)\nul $(RMDIR) $(OUT_DIR)
+
+distclean: realclean
+	@if exist $(WINDIR)\nmakehlp.exe del $(WINDIR)\nmakehlp.exe
+	@if exist $(WINDIR)\nmakehlp.obj del $(WINDIR)\nmakehlp.obj

deps/sqlite3/tea/win/nmakehlp.c

+/* ----------------------------------------------------------------------------
+ * nmakehlp.c --
+ *
+ *	This is used to fix limitations within nmake and the environment.
+ *
+ * Copyright (c) 2002 by David Gravereaux.
+ * Copyright (c) 2003 by Patrick Thoyts
+ *
+ * See the file "license.terms" for information on usage and redistribution
+ * of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+ *
+ * ----------------------------------------------------------------------------
+ * RCS: @(#) $Id: nmakehlp.c,v 1.2 2003/10/01 14:56:00 patthoyts Exp $
+ * ----------------------------------------------------------------------------
+ */
+#include <windows.h>
+#include <stdio.h>
+#pragma comment (lib, "user32.lib")
+#pragma comment (lib, "kernel32.lib")
+
+/* protos */
+int CheckForCompilerFeature (const char *option);
+int CheckForLinkerFeature (const char *option);
+int IsIn (const char *string, const char *substring);
+DWORD WINAPI ReadFromPipe (LPVOID args);
+int GetVersionFromHeader(const char *tclh, const char *tkh);
+
+/* globals */
+typedef struct {
+    HANDLE pipe;
+    char buffer[1000];
+} pipeinfo;
+
+pipeinfo Out = {INVALID_HANDLE_VALUE, '\0'};
+pipeinfo Err = {INVALID_HANDLE_VALUE, '\0'};
+
+
+
+/* exitcodes: 0 == no, 1 == yes, 2 == error */
+int
+main (int argc, char *argv[])
+{
+    char msg[300];
+    DWORD dwWritten;
+    int chars;
+
+    if (argc > 1 && *argv[1] == '-') {
+	switch (*(argv[1]+1)) {
+	case 'c':
+	    if (argc != 3) {
+		chars = wsprintf(msg, "usage: %s -c <compiler option>\n"
+			"Tests for whether cl.exe supports an option\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+		return 2;
+	    }
+	    return CheckForCompilerFeature(argv[2]);
+	case 'l':
+	    if (argc != 3) {
+		chars = wsprintf(msg, "usage: %s -l <linker option>\n"
+			"Tests for whether link.exe supports an option\n"
+			"exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+		return 2;
+	    }
+	    return CheckForLinkerFeature(argv[2]);
+	case 'f':
+	    if (argc == 2) {
+		chars = wsprintf(msg, "usage: %s -f <string> <substring>\n"
+		    "Find a substring within another\n"
+		    "exitcodes: 0 == no, 1 == yes, 2 == error\n", argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+		return 2;
+	    } else if (argc == 3) {
+		/* if the string is blank, there is no match */
+		return 0;
+	    } else {
+		return IsIn(argv[2], argv[3]);
+	    }
+	case 'v':
+	    if (argc != 4) {
+		chars = wsprintf(msg, "usage: %s -v <tcl.h> <tk.h>\n"
+		    "Search for versions from the tcl and tk headers.",
+		    argv[0]);
+		WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+		return 0;
+	    }
+	    return GetVersionFromHeader(argv[2], argv[3]);
+	}
+    }
+    chars = wsprintf(msg, "usage: %s -c|-l|-f ...\n"
+	    "This is a little helper app to equalize shell differences between WinNT and\n"
+	    "Win9x and get nmake.exe to accomplish its job.\n",
+	    argv[0]);
+    WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, chars, &dwWritten, NULL);
+    return 2;
+}
+
+int
+CheckForCompilerFeature (const char *option)
+{
+    STARTUPINFO si;
+    PROCESS_INFORMATION pi;
+    SECURITY_ATTRIBUTES sa;
+    DWORD threadID;
+    char msg[300];
+    BOOL ok;
+    HANDLE hProcess, h, pipeThreads[2];
+    char cmdline[100];
+
+    hProcess = GetCurrentProcess();
+
+    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+    ZeroMemory(&si, sizeof(STARTUPINFO));
+    si.cb = sizeof(STARTUPINFO);
+    si.dwFlags   = STARTF_USESTDHANDLES;
+    si.hStdInput = INVALID_HANDLE_VALUE;
+
+    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+    sa.lpSecurityDescriptor = NULL;
+    sa.bInheritHandle = FALSE;
+
+    /* create a non-inheritible pipe. */
+    CreatePipe(&Out.pipe, &h, &sa, 0);
+
+    /* dupe the write side, make it inheritible, and close the original. */
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 
+	    0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /* Same as above, but for the error side. */
+    CreatePipe(&Err.pipe, &h, &sa, 0);
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 
+	    0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /* base command line */
+    strcpy(cmdline, "cl.exe -nologo -c -TC -Fdtemp ");
+    /* append our option for testing */
+    strcat(cmdline, option);
+    /* filename to compile, which exists, but is nothing and empty. */
+    strcat(cmdline, " nul");
+
+    ok = CreateProcess(
+	    NULL,	    /* Module name. */
+	    cmdline,	    /* Command line. */
+	    NULL,	    /* Process handle not inheritable. */
+	    NULL,	    /* Thread handle not inheritable. */
+	    TRUE,	    /* yes, inherit handles. */
+	    DETACHED_PROCESS, /* No console for you. */
+	    NULL,	    /* Use parent's environment block. */
+	    NULL,	    /* Use parent's starting directory. */
+	    &si,	    /* Pointer to STARTUPINFO structure. */
+	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
+
+    if (!ok) {
+	DWORD err = GetLastError();
+	int chars = wsprintf(msg, "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS |
+		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID) &msg[chars],
+		(300-chars), 0);
+	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, strlen(msg), &err, NULL);
+	return 2;
+    }
+
+    /* close our references to the write handles that have now been inherited. */
+    CloseHandle(si.hStdOutput);
+    CloseHandle(si.hStdError);
+
+    WaitForInputIdle(pi.hProcess, 5000);
+    CloseHandle(pi.hThread);
+
+    /* start the pipe reader threads. */
+    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+    /* block waiting for the process to end. */
+    WaitForSingleObject(pi.hProcess, INFINITE);
+    CloseHandle(pi.hProcess);
+
+    /* clean up temporary files before returning */
+    DeleteFile("temp.idb");
+    DeleteFile("temp.pdb");
+
+    /* wait for our pipe to get done reading, should it be a little slow. */
+    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+    CloseHandle(pipeThreads[0]);
+    CloseHandle(pipeThreads[1]);
+
+    /* look for the commandline warning code in both streams. */
+    return !(strstr(Out.buffer, "D4002") != NULL || strstr(Err.buffer, "D4002") != NULL);
+}
+
+int
+CheckForLinkerFeature (const char *option)
+{
+    STARTUPINFO si;
+    PROCESS_INFORMATION pi;
+    SECURITY_ATTRIBUTES sa;
+    DWORD threadID;
+    char msg[300];
+    BOOL ok;
+    HANDLE hProcess, h, pipeThreads[2];
+    char cmdline[100];
+
+    hProcess = GetCurrentProcess();
+
+    ZeroMemory(&pi, sizeof(PROCESS_INFORMATION));
+    ZeroMemory(&si, sizeof(STARTUPINFO));
+    si.cb = sizeof(STARTUPINFO);
+    si.dwFlags   = STARTF_USESTDHANDLES;
+    si.hStdInput = INVALID_HANDLE_VALUE;
+
+    ZeroMemory(&sa, sizeof(SECURITY_ATTRIBUTES));
+    sa.nLength = sizeof(SECURITY_ATTRIBUTES);
+    sa.lpSecurityDescriptor = NULL;
+    sa.bInheritHandle = TRUE;
+
+    /* create a non-inheritible pipe. */
+    CreatePipe(&Out.pipe, &h, &sa, 0);
+
+    /* dupe the write side, make it inheritible, and close the original. */
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdOutput, 
+	    0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /* Same as above, but for the error side. */
+    CreatePipe(&Err.pipe, &h, &sa, 0);
+    DuplicateHandle(hProcess, h, hProcess, &si.hStdError, 
+	    0, TRUE, DUPLICATE_SAME_ACCESS | DUPLICATE_CLOSE_SOURCE);
+
+    /* base command line */
+    strcpy(cmdline, "link.exe -nologo ");
+    /* append our option for testing */
+    strcat(cmdline, option);
+    /* filename to compile, which exists, but is nothing and empty. */
+//    strcat(cmdline, " nul");
+
+    ok = CreateProcess(
+	    NULL,	    /* Module name. */
+	    cmdline,	    /* Command line. */
+	    NULL,	    /* Process handle not inheritable. */
+	    NULL,	    /* Thread handle not inheritable. */
+	    TRUE,	    /* yes, inherit handles. */
+	    DETACHED_PROCESS, /* No console for you. */
+	    NULL,	    /* Use parent's environment block. */
+	    NULL,	    /* Use parent's starting directory. */
+	    &si,	    /* Pointer to STARTUPINFO structure. */
+	    &pi);	    /* Pointer to PROCESS_INFORMATION structure. */
+
+    if (!ok) {
+	DWORD err = GetLastError();
+	int chars = wsprintf(msg, "Tried to launch: \"%s\", but got error [%u]: ", cmdline, err);
+
+	FormatMessage(FORMAT_MESSAGE_FROM_SYSTEM | FORMAT_MESSAGE_IGNORE_INSERTS |
+		FORMAT_MESSAGE_MAX_WIDTH_MASK, 0L, err, 0, (LPVOID) &msg[chars],
+		(300-chars), 0);
+	WriteFile(GetStdHandle(STD_ERROR_HANDLE), msg, strlen(msg), &err, NULL);
+	return 2;
+    }
+
+    /* close our references to the write handles that have now been inherited. */
+    CloseHandle(si.hStdOutput);
+    CloseHandle(si.hStdError);
+
+    WaitForInputIdle(pi.hProcess, 5000);
+    CloseHandle(pi.hThread);
+
+    /* start the pipe reader threads. */
+    pipeThreads[0] = CreateThread(NULL, 0, ReadFromPipe, &Out, 0, &threadID);
+    pipeThreads[1] = CreateThread(NULL, 0, ReadFromPipe, &Err, 0, &threadID);
+
+    /* block waiting for the process to end. */
+    WaitForSingleObject(pi.hProcess, INFINITE);
+    CloseHandle(pi.hProcess);
+
+    /* wait for our pipe to get done reading, should it be a little slow. */
+    WaitForMultipleObjects(2, pipeThreads, TRUE, 500);
+    CloseHandle(pipeThreads[0]);
+    CloseHandle(pipeThreads[1]);
+
+    /* look for the commandline warning code in the stderr stream. */
+    return !(strstr(Out.buffer, "LNK1117") != NULL || strstr(Err.buffer, "LNK1117") != NULL);
+}
+
+DWORD WINAPI
+ReadFromPipe (LPVOID args)
+{
+    pipeinfo *pi = (pipeinfo *) args;
+    char *lastBuf = pi->buffer;
+    DWORD dwRead;
+    BOOL ok;
+
+again:
+    ok = ReadFile(pi->pipe, lastBuf, 25, &dwRead, 0L);
+    if (!ok || dwRead == 0) {
+	CloseHandle(pi->pipe);
+	return 0;
+    }
+    lastBuf += dwRead;
+    goto again;
+
+    return 0;  /* makes the compiler happy */
+}
+
+int
+IsIn (const char *string, const char *substring)
+{
+    return (strstr(string, substring) != NULL);
+}
+
+	
+static double
+ReadVersionFromHeader(const char *file, const char *macro)
+{
+    double d = 0.0;
+    CHAR szBuffer[100];
+    LPSTR p;
+    DWORD cbBuffer = 100;
+    FILE *fp = fopen(file, "r");
+    if (fp != NULL) {
+	while (fgets(szBuffer, cbBuffer, fp) != NULL) {
+	    if ((p = strstr(szBuffer, macro)) != NULL) {
+		while (*p && !isdigit(*p)) ++p;
+		d = strtod(p, NULL);
+		break;
+	    }
+	}
+	fclose(fp);
+    }
+    return d;
+}
+
+int
+GetVersionFromHeader(const char *tclh, const char *tkh)
+{
+    double dTcl = 0.0, dTk = 0.0;
+    
+    if (tclh != NULL)
+	dTcl = ReadVersionFromHeader(tclh, "TCL_VERSION");
+    if (tkh != NULL)
+	dTk = ReadVersionFromHeader(tkh, "TK_VERSION");
+
+    if (dTcl > 0 || dTk > 0) {
+	FILE *ofp = fopen("version.vc", "w");
+	if (dTcl > 0)
+	    fprintf(ofp, "TCL_DOTVERSION\t= %0.1f\nTCL_VERSION\t= %u\n",
+		    dTcl, (int)(dTcl * 10.0));
+	if (dTk > 0)
+	    fprintf(ofp, "TK_DOTVERSION\t= %0.1f\nTK_VERSION\t= %u\n",
+		    dTk, (int)(dTk * 10.0));
+	fclose(ofp);
+	return 0;
+    }
+    return 1;
+}

deps/sqlite3/tea/win/rules.vc

+#------------------------------------------------------------------------------
+# rules.vc --
+#
+#	Microsoft Visual C++ makefile include for decoding the commandline
+#	macros.  This file does not need editing to build Tcl.
+#
+#	This version is modified from the Tcl source version to support
+#	building extensions using nmake.
+#
+# See the file "license.terms" for information on usage and redistribution
+# of this file, and for a DISCLAIMER OF ALL WARRANTIES.
+# 
+# Copyright (c) 2001-2002 David Gravereaux.
+# Copyright (c) 2003 Patrick Thoyts
+#
+#------------------------------------------------------------------------------
+# RCS: @(#) $Id: rules.vc,v 1.3 2004/07/04 23:15:23 patthoyts Exp $
+#------------------------------------------------------------------------------
+
+!ifndef _RULES_VC
+_RULES_VC = 1
+
+cc32		= $(CC)   # built-in default.
+link32		= link
+lib32		= lib
+rc32		= $(RC)   # built-in default.
+
+!ifndef INSTALLDIR
+### Assume the normal default.
+_INSTALLDIR	= C:\Program Files\Tcl
+!else
+### Fix the path separators.
+_INSTALLDIR	= $(INSTALLDIR:/=\)
+!endif
+
+!ifndef MACHINE
+MACHINE		= IX86
+!endif
+
+!ifndef CFG_ENCODING
+CFG_ENCODING	= \"cp1252\"
+!endif
+
+#----------------------------------------------------------
+# Set the proper copy method to avoid overwrite questions
+# to the user when copying files and selecting the right
+# "delete all" method.
+#----------------------------------------------------------
+
+!if "$(OS)" == "Windows_NT"
+RMDIR	= rmdir /S /Q
+!if ![ver | find "4.0" > nul]
+CPY	= echo y | xcopy /i
+!else
+CPY	= xcopy /i /y
+!endif
+!else
+CPY	= xcopy /i
+RMDIR	= deltree /Y
+!endif
+
+
+!message ===============================================================================
+
+#----------------------------------------------------------
+# build the helper app we need to overcome nmake's limiting
+# environment.
+#----------------------------------------------------------
+
+!if !exist(nmakehlp.exe)
+!if [$(cc32) -nologo -ML nmakehlp.c -link -subsystem:console > nul]
+!endif
+!endif
+
+#----------------------------------------------------------
+# Test for compiler features
+#----------------------------------------------------------
+
+### test for optimizations
+!if [nmakehlp -c -Otip]
+!message *** Compiler has 'Optimizations'
+OPTIMIZING	= 1
+!else
+!message *** Compiler doesn't have 'Optimizations'
+OPTIMIZING	= 0
+!endif
+
+!if "$(MACHINE)" == "IX86"
+### test for pentium errata
+!if [nmakehlp -c -QI0f]
+!message *** Compiler has 'Pentium 0x0f fix'
+PENT_0F_ERRATA	= 1
+!else
+!message *** Compiler doesn't have 'Pentium 0x0f fix'
+PENT_0F_ERRATA	= 0
+!endif
+### test for -align:4096, when align:512 will do.
+!if [nmakehlp -l -opt:nowin98]
+!message *** Linker has 'Win98 alignment problem'
+ALIGN98_HACK	= 1
+!else
+!message *** Linker doesn't have 'Win98 alignment problem'
+ALIGN98_HACK	= 0
+!endif
+!else
+PENT_0F_ERRATA	= 0
+ALIGN98_HACK	= 0
+!endif
+
+!if "$(MACHINE)" == "IA64"
+### test for Itanium errata
+!if [nmakehlp -c -QIA64_Bx]
+!message *** Compiler has 'B-stepping errata workarounds'
+ITAN_B_ERRATA	= 1
+!else
+!message *** Compiler doesn't have 'B-stepping errata workarounds'
+ITAN_B_ERRATA	= 0
+!endif
+!else
+ITAN_B_ERRATA	= 0
+!endif
+
+#----------------------------------------------------------
+# Decode the options requested.
+#----------------------------------------------------------
+
+!if "$(OPTS)" == "" || [nmakehlp -f "$(OPTS)" "none"]
+STATIC_BUILD	= 0
+TCL_THREADS	= 0
+DEBUG		= 0
+PROFILE		= 0
+MSVCRT		= 0
+LOIMPACT	= 0
+TCL_USE_STATIC_PACKAGES	= 0
+USE_THREAD_ALLOC = 0
+!else
+!if [nmakehlp -f $(OPTS) "static"]
+!message *** Doing static
+STATIC_BUILD	= 1
+!else
+STATIC_BUILD	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "msvcrt"]
+!message *** Doing msvcrt
+MSVCRT		= 1
+!else
+MSVCRT		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "staticpkg"]
+!message *** Doing staticpkg
+TCL_USE_STATIC_PACKAGES	= 1
+!else
+TCL_USE_STATIC_PACKAGES	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "threads"]
+!message *** Doing threads
+TCL_THREADS	= 1
+!else
+TCL_THREADS	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "symbols"]
+!message *** Doing symbols
+DEBUG		= 1
+!else
+DEBUG		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "profile"]
+!message *** Doing profile
+PROFILE		= 1
+!else
+PROFILE		= 0
+!endif
+!if [nmakehlp -f $(OPTS) "loimpact"]
+!message *** Doing loimpact
+LOIMPACT	= 1
+!else
+LOIMPACT	= 0
+!endif
+!if [nmakehlp -f $(OPTS) "thrdalloc"]
+!message *** Doing thrdalloc
+USE_THREAD_ALLOC = 1
+!else
+USE_THREAD_ALLOC = 0
+!endif
+!endif
+
+
+!if !$(STATIC_BUILD)
+# Make sure we don't build overly fat DLLs.
+MSVCRT		= 1
+# We shouldn't statically put the extensions inside the shell when dynamic.
+TCL_USE_STATIC_PACKAGES = 0
+!endif
+
+
+#----------------------------------------------------------
+# Figure-out how to name our intermediate and output directories.
+# We wouldn't want different builds to use the same .obj files
+# by accident.
+#----------------------------------------------------------
+
+SUFX	    = tsgx
+
+!if $(DEBUG)
+BUILDDIRTOP = Debug
+DBGX	    = g
+!else
+BUILDDIRTOP = Release
+DBGX	    =
+SUFX	    = $(SUFX:g=)
+!endif
+
+TMP_DIRFULL = .\$(BUILDDIRTOP)\$(PROJECT)_ThreadedDynamicStaticX
+
+!if !$(STATIC_BUILD)
+TMP_DIRFULL = $(TMP_DIRFULL:Static=)
+SUFX	    = $(SUFX:s=)
+EXT	    = dll
+!if $(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX	    = $(SUFX:x=)
+!endif
+!else
+TMP_DIRFULL = $(TMP_DIRFULL:Dynamic=)
+EXT	    = lib
+!if !$(MSVCRT)
+TMP_DIRFULL = $(TMP_DIRFULL:X=)
+SUFX	    = $(SUFX:x=)
+!endif
+!endif
+
+!if !$(TCL_THREADS)
+TMP_DIRFULL = $(TMP_DIRFULL:Threaded=)
+SUFX	    = $(SUFX:t=)
+!endif
+
+!ifndef TMP_DIR
+TMP_DIR	    = $(TMP_DIRFULL)
+!ifndef OUT_DIR
+OUT_DIR	    = .\$(BUILDDIRTOP)
+!endif
+!else
+!ifndef OUT_DIR
+OUT_DIR	    = $(TMP_DIR)
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Decode the statistics requested.
+#----------------------------------------------------------
+
+!if "$(STATS)" == "" || [nmakehlp -f "$(STATS)" "none"]
+TCL_MEM_DEBUG	    = 0
+TCL_COMPILE_DEBUG   = 0
+!else
+!if [nmakehlp -f $(STATS) "memdbg"]
+!message *** Doing memdbg
+TCL_MEM_DEBUG	    = 1
+!else
+TCL_MEM_DEBUG	    = 0
+!endif
+!if [nmakehlp -f $(STATS) "compdbg"]
+!message *** Doing compdbg
+TCL_COMPILE_DEBUG   = 1
+!else
+TCL_COMPILE_DEBUG   = 0
+!endif
+!endif
+
+
+#----------------------------------------------------------
+# Set our defines now armed with our options.
+#----------------------------------------------------------
+
+OPTDEFINES	= -DTCL_CFGVAL_ENCODING=$(CFG_ENCODING)
+
+!if $(TCL_MEM_DEBUG)
+OPTDEFINES	= -DTCL_MEM_DEBUG
+!endif
+!if $(TCL_COMPILE_DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_COMPILE_DEBUG -DTCL_COMPILE_STATS
+!endif
+!if $(TCL_THREADS)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_THREADS=1
+!if $(USE_THREAD_ALLOC)
+OPTDEFINES	= $(OPTDEFINES) -DUSE_THREAD_ALLOC=1
+!endif
+!endif
+!if $(STATIC_BUILD)
+OPTDEFINES	= $(OPTDEFINES) -DSTATIC_BUILD
+!endif
+
+!if $(DEBUG)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_DEBUG
+!elseif $(OPTIMIZING)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_OPTIMIZED
+!endif
+!if $(PROFILE)
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_PROFILED
+!endif
+!if "$(MACHINE)" == "IA64"
+OPTDEFINES	= $(OPTDEFINES) -DTCL_CFG_DO64BIT
+!endif
+
+
+#----------------------------------------------------------
+# Get common info used when building extensions.
+#----------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl"
+
+# If INSTALLDIR set to tcl root dir then reset to the lib dir.
+!if exist("$(_INSTALLDIR)\include\tcl.h")
+_INSTALLDIR=$(_INSTALLDIR)\lib
+!endif
+
+!if !defined(TCLDIR)
+!if exist("$(_INSTALLDIR)\..\include\tcl.h")
+TCLINSTALL	= 1
+_TCLDIR		= $(_INSTALLDIR)\..
+_TCL_H          = $(_INSTALLDIR)\..\include\tcl.h
+TCLDIR          = $(_INSTALLDIR)\..
+!else
+MSG=^
+Failed to find tcl.h.  Set the TCLDIR macro.
+!error $(MSG)
+!endif
+!else
+_TCLDIR	= $(TCLDIR:/=\)
+!if exist("$(_TCLDIR)\include\tcl.h")
+TCLINSTALL	= 1
+_TCL_H          = $(_TCLDIR)\include\tcl.h
+!elseif exist("$(_TCLDIR)\generic\tcl.h")
+TCLINSTALL	= 0
+_TCL_H          = $(_TCLDIR)\generic\tcl.h
+!else
+MSG =^
+Failed to find tcl.h.  The TCLDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+
+!if [nmakehlp -v $(_TCL_H) ""] == 0
+!include version.vc
+!else
+TCL_DOTVERSION  = 8.5
+TCL_VERSION	= $(TCL_DOTVERSION:.=)
+!endif
+
+!if $(TCLINSTALL)
+TCLSH		= "$(_TCLDIR)\bin\tclsh$(TCL_VERSION)$(SUFX).exe"
+TCLSTUBLIB	= "$(_TCLDIR)\lib\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB	= "$(_TCLDIR)\lib\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY	= $(_TCLDIR)\lib
+TCL_INCLUDES    = -I"$(_TCLDIR)\include"
+!else
+TCLSH		= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclsh$(TCL_VERSION)$(SUFX).exe"
+TCLSTUBLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tclstub$(TCL_VERSION).lib"
+TCLIMPLIB	= "$(_TCLDIR)\win\$(BUILDDIRTOP)\tcl$(TCL_VERSION)$(SUFX).lib"
+TCL_LIBRARY	= $(_TCLDIR)\library
+TCL_INCLUDES	= -I"$(_TCLDIR)\generic" -I"$(_TCLDIR)\win"
+!endif
+
+!endif
+
+#----------------------------------------------------------
+# Get Tk info for building extensions.
+#----------------------------------------------------------
+
+!if "$(PROJECT)" != "tcl" && "$(PROJECT)" != "tk"
+
+!if !defined(TKDIR)
+!if exist("$(_INSTALLDIR)\..\include\tk.h")
+TKINSTALL      = 1
+_TKDIR         = $(_INSTALLDIR)\..
+_TK_H          = $(_TKDIR)\include\tk.h
+TKDIR          = $(_TKDIR)
+!elseif exist("$(_TCLDIR)\include\tk.h")
+TKINSTALL      = 1
+_TKDIR         = $(_TCLDIR)
+_TK_H          = $(_TKDIR)\include\tk.h
+TKDIR          = $(_TKDIR)
+!else
+MSG =^
+Failed to find tk.h. Set the TKDIR macro.
+!error $(MSG)
+!endif
+!else
+_TKDIR = $(TKDIR:/=\)
+!if exist("$(_TKDIR)\include\tk.h")
+TKINSTALL      = 1
+_TK_H          = $(_TKDIR)\include\tk.h
+!elseif exist("$(_TKDIR)\generic\tk.h")
+TKINSTALL      = 0
+_TK_H          = $(_TKDIR)\generic\tk.h
+!else
+MSG =^
+Failed to find tk.h. The TKDIR macro does not appear correct.
+!error $(MSG)
+!endif
+!endif
+
+!if [nmakehlp -v $(_TCL_H) $(_TK_H)] == 0
+!include version.vc
+!else
+TK_DOTVERSION	= 8.5
+TK_VERSION	= $(TK_DOTVERSION:.=)
+!endif
+
+!if $(TKINSTALL)
+WISH		= "$(_TKDIR)\bin\wish$(TK_VERSION)$(SUFX).exe"
+TKSTUBLIB	= "$(_TKDIR)\lib\tkstub$(TK_VERSION).lib"
+TKIMPLIB	= "$(_TKDIR)\lib\tk$(TK_VERSION)$(SUFX).lib"
+TK_INCLUDES     = -I"$(_TKDIR)\include"
+!else
+WISH		= "$(_TKDIR)\win\$(BUILDDIRTOP)\wish$(TCL_VERSION)$(SUFX).exe"
+TKSTUBLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tkstub$(TCL_VERSION).lib"
+TKIMPLIB	= "$(_TKDIR)\win\$(BUILDDIRTOP)\tk$(TCL_VERSION)$(SUFX).lib"
+TK_INCLUDES     = -I"$(_TKDIR)\generic" -I"$(_TKDIR)\win" -I"$(_TKDIR)\xlib"
+!endif
+
+!endif
+
+
+
+#----------------------------------------------------------
+# Display stats being used.
+#----------------------------------------------------------
+
+!message *** Intermediate directory will be '$(TMP_DIR)'
+!message *** Output directory will be '$(OUT_DIR)'
+!message *** Suffix for binaries will be '$(SUFX)'
+!message *** Optional defines are '$(OPTDEFINES)'
+
+!endif