building docs

docs/Makefile

+# Minimal makefile for Sphinx documentation
+#
+
+# You can set these variables from the command line.
+SPHINXOPTS    =
+SPHINXBUILD   = sphinx-build
+SPHINXPROJ    = zeppelin-solidity
+SOURCEDIR     = source
+BUILDDIR      = build
+
+# Put it first so that "make" without argument is like "make help".
+help:
+	@$(SPHINXBUILD) -M help "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
+
+.PHONY: help Makefile
+
+# Catch-all target: route all unknown targets to Sphinx using the new
+# "make mode" option.  $(O) is meant as a shortcut for $(SPHINXOPTS).
+%: Makefile
+	@$(SPHINXBUILD) -M $@ "$(SOURCEDIR)" "$(BUILDDIR)" $(SPHINXOPTS) $(O)
\ No newline at end of file

docs/make.bat

+@ECHO OFF
+
+pushd %~dp0
+
+REM Command file for Sphinx documentation
+
+if "%SPHINXBUILD%" == "" (
+	set SPHINXBUILD=sphinx-build
+)
+set SOURCEDIR=source
+set BUILDDIR=build
+set SPHINXPROJ=zeppelin-solidity
+
+if "%1" == "" goto help
+
+%SPHINXBUILD% >NUL 2>NUL
+if errorlevel 9009 (
+	echo.
+	echo.The 'sphinx-build' command was not found. Make sure you have Sphinx
+	echo.installed, then set the SPHINXBUILD environment variable to point
+	echo.to the full path of the 'sphinx-build' executable. Alternatively you
+	echo.may add the Sphinx directory to PATH.
+	echo.
+	echo.If you don't have Sphinx installed, grab it from
+	echo.http://sphinx-doc.org/
+	exit /b 1
+)
+
+%SPHINXBUILD% -M %1 %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+goto end
+
+:help
+%SPHINXBUILD% -M help %SOURCEDIR% %BUILDDIR% %SPHINXOPTS%
+
+:end
+popd

docs/source/conf.py

+# -*- coding: utf-8 -*-
+#
+# zeppelin-solidity documentation build configuration file, created by
+# sphinx-quickstart on Tue Dec 13 11:35:05 2016.
+#
+# This file is execfile()d with the current directory set to its
+# containing dir.
+#
+# Note that not all possible configuration values are present in this
+# autogenerated file.
+#
+# All configuration values have a default; values that are commented out
+# serve to show the default.
+
+# If extensions (or modules to document with autodoc) are in another directory,
+# add these directories to sys.path here. If the directory is relative to the
+# documentation root, use os.path.abspath to make it absolute, like shown here.
+#
+# import os
+# import sys
+# sys.path.insert(0, os.path.abspath('.'))
+
+
+# -- General configuration ------------------------------------------------
+
+# If your documentation needs a minimal Sphinx version, state it here.
+#
+# needs_sphinx = '1.0'
+
+# Add any Sphinx extension module names here, as strings. They can be
+# extensions coming with Sphinx (named 'sphinx.ext.*') or your custom
+# ones.
+extensions = []
+
+# Add any paths that contain templates here, relative to this directory.
+templates_path = ['_templates']
+
+# The suffix(es) of source filenames.
+# You can specify multiple suffix as a list of string:
+#
+# source_suffix = ['.rst', '.md']
+source_suffix = '.rst'
+
+# The master toctree document.
+master_doc = 'index'
+
+# General information about the project.
+project = u'zeppelin-solidity'
+copyright = u'2016, Smart Contract Solutions, Inc'
+author = u'Smart Contract Solutions, Inc'
+
+# The version info for the project you're documenting, acts as replacement for
+# |version| and |release|, also used in various other places throughout the
+# built documents.
+#
+# The short X.Y version.
+version = u'1.0.0'
+# The full version, including alpha/beta/rc tags.
+release = u'1.0.0'
+
+# The language for content autogenerated by Sphinx. Refer to documentation
+# for a list of supported languages.
+#
+# This is also used if you do content translation via gettext catalogs.
+# Usually you set "language" from the command line for these cases.
+language = None
+
+# List of patterns, relative to source directory, that match files and
+# directories to ignore when looking for source files.
+# This patterns also effect to html_static_path and html_extra_path
+exclude_patterns = []
+
+# The name of the Pygments (syntax highlighting) style to use.
+pygments_style = 'sphinx'
+
+# If true, `todo` and `todoList` produce output, else they produce nothing.
+todo_include_todos = False
+
+
+# -- Options for HTML output ----------------------------------------------
+
+# The theme to use for HTML and HTML Help pages.  See the documentation for
+# a list of builtin themes.
+#
+import sphinx_rtd_theme
+
+html_theme = "sphinx_rtd_theme"
+
+html_theme_path = [sphinx_rtd_theme.get_html_theme_path()]
+
+# Theme options are theme-specific and customize the look and feel of a theme
+# further.  For a list of options available for each theme, see the
+# documentation.
+#
+# html_theme_options = {}
+
+# Add any paths that contain custom static files (such as style sheets) here,
+# relative to this directory. They are copied after the builtin static files,
+# so a file named "default.css" will overwrite the builtin "default.css".
+html_static_path = ['_static']
+
+
+# -- Options for HTMLHelp output ------------------------------------------
+
+# Output file base name for HTML help builder.
+htmlhelp_basename = 'zeppelin-soliditydoc'
+
+
+# -- Options for LaTeX output ---------------------------------------------
+
+latex_elements = {
+    # The paper size ('letterpaper' or 'a4paper').
+    #
+    # 'papersize': 'letterpaper',
+
+    # The font size ('10pt', '11pt' or '12pt').
+    #
+    # 'pointsize': '10pt',
+
+    # Additional stuff for the LaTeX preamble.
+    #
+    # 'preamble': '',
+
+    # Latex figure (float) alignment
+    #
+    # 'figure_align': 'htbp',
+}
+
+# Grouping the document tree into LaTeX files. List of tuples
+# (source start file, target name, title,
+#  author, documentclass [howto, manual, or own class]).
+latex_documents = [
+    (master_doc, 'zeppelin-solidity.tex', u'zeppelin-solidity Documentation',
+     u'Zeppelin', 'manual'),
+]
+
+
+# -- Options for manual page output ---------------------------------------
+
+# One entry per manual page. List of tuples
+# (source start file, name, description, authors, manual section).
+man_pages = [
+    (master_doc, 'zeppelin-solidity', u'zeppelin-solidity Documentation',
+     [author], 1)
+]
+
+
+# -- Options for Texinfo output -------------------------------------------
+
+# Grouping the document tree into Texinfo files. List of tuples
+# (source start file, target name, title, author,
+#  dir menu entry, description, category)
+texinfo_documents = [
+    (master_doc, 'zeppelin-solidity', u'zeppelin-solidity Documentation',
+     author, 'zeppelin-solidity', 'One line description of project.',
+     'Miscellaneous'),
+]
+
+
+

docs/source/index.rst

+.. zeppelin-solidity documentation master file, created by
+   sphinx-quickstart on Tue Dec 13 11:35:05 2016.
+   You can adapt this file completely to your liking, but it should at least
+   contain the root `toctree` directive.
+
+Documentation
+=============================================
+
+**Welcome to Zeppelin-Solidity!** Get familiar with the Zeppelin Smart Contracts.
+
+Documentation
+^^^^^^^^^^^^^^
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+   
+   license
+   hola
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
+
+Smart Contracts
+^^^^^^^^^^^^^^^
+
+Ownable
+--------
+Base contract with an owner.
+
+**Ownable( )**
+++++++++++++++++
+Sets the address of the creator of the contract as the owner.
+
+modifier onlyOwner( )
+++++++++++++++++++++++++
+Prevents function from running if it is called by anyone other than the owner.
+
+**transfer(address newOwner) onlyOwner**
+>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
+Transfers ownership of the contract to the passed address.
+
+---
+### Stoppable
+Base contract that provides an emergency stop mechanism.
+
+Inherits from contract Ownable.
+
+#### emergencyStop( ) external onlyOwner
+Triggers the stop mechanism on the contract. After this function is called (by the owner of the contract), any function with modifier stopInEmergency will not run.
+
+#### modifier stopInEmergency
+Prevents function from running if stop mechanism is activated.
+
+#### modifier onlyInEmergency
+Only runs if stop mechanism is activated.
+
+#### release( ) external onlyOwner onlyInEmergency
+Deactivates the stop mechanism.
+
+---
+### Killable
+Base contract that can be killed by owner.
+
+Inherits from contract Ownable.
+
+#### kill( ) onlyOwner
+Destroys the contract and sends funds back to the owner.
+___
+### Claimable
+Extension for the Ownable contract, where the ownership needs to be claimed
+
+#### transfer(address newOwner) onlyOwner
+Sets the passed address as the pending owner.
+
+#### modifier onlyPendingOwner
+Function only runs if called by pending owner.
+
+#### claimOwnership( ) onlyPendingOwner
+Completes transfer of ownership by setting pending owner as the new owner.
+___
+### Migrations
+Base contract that allows for a new instance of itself to be created at a different address.
+
+Inherits from contract Ownable.
+
+#### upgrade(address new_address) onlyOwner
+Creates a new instance of the contract at the passed address.
+
+#### setCompleted(uint completed) onlyOwner
+Sets the last time that a migration was completed.
+
+___
+### SafeMath
+Provides functions of mathematical operations with safety checks.
+
+#### assert(bool assertion) internal
+Throws an error if the passed result is false. Used in this contract by checking mathematical expressions.
+
+#### safeMul(uint a, uint b) internal returns (uint)
+Multiplies two unisgned integers. Asserts that dividing the product by the non-zero multiplicand results in the multiplier.
+
+#### safeSub(uint a, unit b) internal returns (uint)
+Checks that b is not greater than a before subtracting.
+
+#### safeAdd(unit a, unit b) internal returns (uint)
+Checks that the result is greater than both a and b.
+
+___
+### LimitBalance
+
+Base contract that provides mechanism for limiting the amount of funds a contract can hold.
+
+#### LimitBalance(unit _limit)
+Constructor takes an unisgned integer and sets it as the limit of funds this contract can hold.
+
+#### modifier limitedPayable()
+Throws an error if this contract's balance is already above the limit.
+
+___
+### PullPayment
+Base contract supporting async send for pull payments.
+Inherit from this contract and use asyncSend instead of send.
+
+#### asyncSend(address dest, uint amount) internal
+Adds sent amount to available balance that payee can pull from this contract, called by payer.
+
+#### withdrawPayments( )
+Sends designated balance to payee calling the contract. Throws error if designated balance is 0, if contract does not hold enough funds ot pay the payee, or if the send transaction is not successful.
+
+___
+### StandardToken
+Based on code by FirstBlood: [FirstBloodToken.sol]
+
+Inherits from contract SafeMath. Implementation of abstract contract ERC20 (see https://github.com/ethereum/EIPs/issues/20)
+
+[FirstBloodToken.sol]: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
+
+#### approve(address _spender, uint _value) returns (bool success)
+Sets the amount of the sender's token balance that the passed address is approved to use.
+
+###allowance(address _owner, address _spender) constant returns (uint remaining)
+Returns the approved amount of the owner's balance that the spender can use.
+
+###balanceOf(address _owner) constant returns (uint balance)
+Returns the token balance of the passed address.
+
+###transferFrom(address _from, address _to, uint _value) returns (bool success)
+Transfers tokens from an account that the sender is approved to transfer from. Amount must not be greater than the approved amount or the account's balance.
+
+###function transfer(address _to, uint _value) returns (bool success)
+Transfers tokens from sender's account. Amount must not be greater than sender's balance.
+
+___
+### BasicToken
+Simpler version of StandardToken, with no allowances
+
+#### balanceOf(address _owner) constant returns (uint balance)
+Returns the token balance of the passed address.
+
+###function transfer(address _to, uint _value) returns (bool success)
+Transfers tokens from sender's account. Amount must not be greater than sender's balance.
+
+___
+### CrowdsaleToken
+Simple ERC20 Token example, with crowdsale token creation.
+
+Inherits from contract StandardToken.
+
+#### createTokens(address recipient) payable
+Creates tokens based on message value and credits to the recipient.
+
+#### getPrice() constant returns (uint result)
+Returns the amount of tokens per 1 ether.
+
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
\ No newline at end of file

docs/source/license.rst

+LICENSE
+=============================================
+
+**Welcome to Zeppelin-Solidity!** Get familiar with the Zeppelin Smart Contracts.
+
+Documentation
+^^^^^^^^^^^^^^
+Smart Contr
+
+---
+### Stoppable
+Base contract that provides an emergency stop mechanism.
+
+Inherits from contract Ownable.
+
+#### emergencyStop( ) external onlyOwner
+Triggers the stop mechanism on the contract. After this function is called (by the owner of the contract), any function with modifier stopInEmergency will not run.
+
+#### modifier stopInEmergency
+Prevents function from running if stop mechanism is activated.
+
+#### modifier onlyInEmergency
+Only runs if stop mechanism is activated.
+
+#### release( ) external onlyOwner onlyInEmergency
+Deactivates the stop mechanism.
+
+---
+### Killable
+Base contract that can be killed by owner.
+
+Inherits from contract Ownable.
+
+#### kill( ) onlyOwner
+Destroys the contract and sends funds back to the owner.
+___
+### Claimable
+Extension for the Ownable contract, where the ownership needs to be claimed
+
+#### transfer(address newOwner) onlyOwner
+Sets the passed address as the pending owner.
+
+#### modifier onlyPendingOwner
+Function only runs if called by pending owner.
+
+#### claimOwnership( ) onlyPendingOwner
+Completes transfer of ownership by setting pending owner as the new owner.
+___
+### Migrations
+Base contract that allows for a new instance of itself to be created at a different address.
+
+Inherits from contract Ownable.
+
+#### upgrade(address new_address) onlyOwner
+Creates a new instance of the contract at the passed address.
+
+#### setCompleted(uint completed) onlyOwner
+Sets the last time that a migration was completed.
+
+___
+### SafeMath
+Provides functions of mathematical operations with safety checks.
+
+#### assert(bool assertion) internal
+Throws an error if the passed result is false. Used in this contract by checking mathematical expressions.
+
+#### safeMul(uint a, uint b) internal returns (uint)
+Multiplies two unisgned integers. Asserts that dividing the product by the non-zero multiplicand results in the multiplier.
+
+#### safeSub(uint a, unit b) internal returns (uint)
+Checks that b is not greater than a before subtracting.
+
+#### safeAdd(unit a, unit b) internal returns (uint)
+Checks that the result is greater than both a and b.
+
+___
+### LimitBalance
+
+Base contract that provides mechanism for limiting the amount of funds a contract can hold.
+
+#### LimitBalance(unit _limit)
+Constructor takes an unisgned integer and sets it as the limit of funds this contract can hold.
+
+#### modifier limitedPayable()
+Throws an error if this contract's balance is already above the limit.
+
+___
+### PullPayment
+Base contract supporting async send for pull payments.
+Inherit from this contract and use asyncSend instead of send.
+
+#### asyncSend(address dest, uint amount) internal
+Adds sent amount to available balance that payee can pull from this contract, called by payer.
+
+#### withdrawPayments( )
+Sends designated balance to payee calling the contract. Throws error if designated balance is 0, if contract does not hold enough funds ot pay the payee, or if the send transaction is not successful.
+
+___
+### StandardToken
+Based on code by FirstBlood: [FirstBloodToken.sol]
+
+Inherits from contract SafeMath. Implementation of abstract contract ERC20 (see https://github.com/ethereum/EIPs/issues/20)
+
+[FirstBloodToken.sol]: https://github.com/Firstbloodio/token/blob/master/smart_contract/FirstBloodToken.sol
+
+#### approve(address _spender, uint _value) returns (bool success)
+Sets the amount of the sender's token balance that the passed address is approved to use.
+
+###allowance(address _owner, address _spender) constant returns (uint remaining)
+Returns the approved amount of the owner's balance that the spender can use.
+
+###balanceOf(address _owner) constant returns (uint balance)
+Returns the token balance of the passed address.
+
+###transferFrom(address _from, address _to, uint _value) returns (bool success)
+Transfers tokens from an account that the sender is approved to transfer from. Amount must not be greater than the approved amount or the account's balance.
+
+###function transfer(address _to, uint _value) returns (bool success)
+Transfers tokens from sender's account. Amount must not be greater than sender's balance.
+
+___
+### BasicToken
+Simpler version of StandardToken, with no allowances
+
+#### balanceOf(address _owner) constant returns (uint balance)
+Returns the token balance of the passed address.
+
+###function transfer(address _to, uint _value) returns (bool success)
+Transfers tokens from sender's account. Amount must not be greater than sender's balance.
+
+___
+### CrowdsaleToken
+Simple ERC20 Token example, with crowdsale token creation.
+
+Inherits from contract StandardToken.
+
+#### createTokens(address recipient) payable
+Creates tokens based on message value and credits to the recipient.
+
+#### getPrice() constant returns (uint result)
+Returns the amount of tokens per 1 ether.
+
+
+.. toctree::
+   :maxdepth: 2
+   :caption: Contents:
+
+* :ref:`genindex`
+* :ref:`modindex`
+* :ref:`search`
\ No newline at end of file